From 58a77494733b553bbe340276889a9427e27792a3 Mon Sep 17 00:00:00 2001 From: Roberto Giuffre` Date: Thu, 23 Nov 2023 01:06:21 +0100 Subject: [PATCH] Add files via upload --- Configuration.h | 24 ++++++++++++------------ Configuration_adv.h | 6 +++--- 2 files changed, 15 insertions(+), 15 deletions(-) diff --git a/Configuration.h b/Configuration.h index 37558f4..d02bab4 100644 --- a/Configuration.h +++ b/Configuration.h @@ -63,7 +63,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(kubik369)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "Mechano" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) // @section machine @@ -94,7 +94,7 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 //#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate @@ -691,9 +691,9 @@ #define DEFAULT_Ki_LIST { 1.08, 1.08 } #define DEFAULT_Kd_LIST { 114.00, 114.00 } #else - #define DEFAULT_Kp 12.93 // GR rilevati con Pronterface sulla mia stampante - #define DEFAULT_Ki 0.78 // GR rilevati con Pronterface sulla mia stampante - #define DEFAULT_Kd 53.51 // GR rilevati con Pronterface sulla mia stampante + #define DEFAULT_Kp 13.50 // GR rilevati con Pronterface sulla mia stampante + #define DEFAULT_Ki 0.98 // GR rilevati con Pronterface sulla mia stampante + #define DEFAULT_Kd 46.5 // GR rilevati con Pronterface sulla mia stampante #endif #else #define BANG_MAX 255 // Limit hotend current while in bang-bang mode; 255=full current @@ -781,9 +781,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 100.43 - #define DEFAULT_bedKi 15.47 - #define DEFAULT_bedKd 434.75 + #define DEFAULT_bedKp 114.0 + #define DEFAULT_bedKi 21.93 + #define DEFAULT_bedKd 395.4 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #else @@ -1817,12 +1817,12 @@ // @section geometry // The size of the printable area -#define X_BED_SIZE 172 -#define Y_BED_SIZE 172 +#define X_BED_SIZE 180 +#define Y_BED_SIZE 180 // Travel limits (linear=mm, rotational=°) after homing, corresponding to endstop positions. -#define X_MIN_POS -10 -#define Y_MIN_POS -7 +#define X_MIN_POS -3 +#define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE diff --git a/Configuration_adv.h b/Configuration_adv.h index 3c9c919..f411430 100644 --- a/Configuration_adv.h +++ b/Configuration_adv.h @@ -1086,7 +1086,7 @@ #if ENABLED(ASSISTED_TRAMMING) // Define from 3 to 9 points to probe. - #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } + #define TRAMMING_POINT_XY { { 20, 20 }, { 160, 20 }, { 160, 160 }, { 20, 160 } } // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" @@ -1704,7 +1704,7 @@ */ #define POWER_LOSS_RECOVERY // GR recupera dopo interruzione corrente #if ENABLED(POWER_LOSS_RECOVERY) - #define PLR_ENABLED_DEFAULT true // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) // GR attivo di default + #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) // GR attivo di default //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. @@ -1716,7 +1716,7 @@ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data + #define POWER_LOSS_MIN_Z_CHANGE 0.1 // (mm) Minimum Z change before saving power-loss data // GR era 0.05 lo metto a 0.1 per quel bug che fa girare l'estrusore al ritorno dall'interruzione. // Enable if Z homing is needed for proper recovery. 99.9% of the time this should be disabled! //#define POWER_LOSS_RECOVER_ZHOME