Updated instruction handlers to use factory methods instead of directly setting Size property

X86Disassembler/X86/Handlers/FloatingPoint/LoadStoreInt16Handler.cs

@@ -92,7 +92,7 @@ public class LoadStoreInt16Handler : InstructionHandler
         }
 
         // Read the ModR/M byte
-        var (mod, reg, rm, memoryOperand) = ModRMDecoder.ReadModRM();
+        var (mod, reg, rm, rawMemoryOperand) = ModRMDecoder.ReadModRM();
 
         // Handle based on addressing mode
         if (mod != 3) // Memory operand
@@ -100,21 +100,49 @@ public class LoadStoreInt16Handler : InstructionHandler
             // Set the instruction type based on the reg field
             instruction.Type = MemoryInstructionTypes[(int)reg];
             
-            // Set the size based on the operation
+            // Create the appropriate memory operand based on the operation type and original operand type
+            Operand memoryOperand;
+            int operandSize;
+            
+            // Determine the operand size based on the operation
             if (reg == RegisterIndex.A || reg == RegisterIndex.C || reg == RegisterIndex.D) // 16-bit integer operations
             {
-                // Set to 16-bit for integer operations
+                operandSize = 16;
-                memoryOperand.Size = 16;
             }
             else if (reg == RegisterIndex.Di || reg == RegisterIndex.Bp) // 64-bit integer operations
             {
-                // Set to 64-bit for integer operations
+                operandSize = 64;
-                memoryOperand.Size = 64;
             }
             else if (reg == RegisterIndex.Si || reg == RegisterIndex.Sp) // 80-bit packed BCD operations
             {
-                // Set to 80-bit for BCD operations
+                operandSize = 80;
-                memoryOperand.Size = 80;
+            }
+            else
+            {
+                // Default to 32-bit for other operations
+                operandSize = 32;
+            }
+            
+            // Create the appropriate memory operand based on the type of the raw operand
+            if (rawMemoryOperand is DirectMemoryOperand directMemory)
+            {
+                memoryOperand = OperandFactory.CreateDirectMemoryOperand(directMemory.Address, operandSize);
+            }
+            else if (rawMemoryOperand is BaseRegisterMemoryOperand baseMemory)
+            {
+                memoryOperand = OperandFactory.CreateBaseRegisterMemoryOperand(baseMemory.BaseRegister, operandSize);
+            }
+            else if (rawMemoryOperand is DisplacementMemoryOperand dispMemory)
+            {
+                memoryOperand = OperandFactory.CreateDisplacementMemoryOperand(dispMemory.BaseRegister, dispMemory.Displacement, operandSize);
+            }
+            else if (rawMemoryOperand is ScaledIndexMemoryOperand scaledMemory)
+            {
+                memoryOperand = OperandFactory.CreateScaledIndexMemoryOperand(scaledMemory.IndexRegister, scaledMemory.Scale, scaledMemory.BaseRegister, scaledMemory.Displacement, operandSize);
+            }
+            else
+            {
+                memoryOperand = rawMemoryOperand;
             }
             
             // Set the structured operands

X86Disassembler/X86/Handlers/Mov/MovMemRegHandler.cs

@@ -51,13 +51,23 @@ public class MovMemRegHandler : InstructionHandler
         // For MOV r/m32, r32 (0x89) or MOV r/m8, r8 (0x88):
         // - The r/m field with mod specifies the destination operand (register or memory)
         // - The reg field specifies the source register
-        var (_, reg, _, destinationOperand) = ModRMDecoder.ReadModRM();
+        Operand destinationOperand;
+        Operand sourceOperand;
         
-        // Adjust the operand size based on the opcode
+        if (operandSize == 8)
-        destinationOperand.Size = operandSize;
+        {
-
+            // For 8-bit operands, use the 8-bit ModR/M decoder and factory methods
-        // Create the source register operand
+            var (_, reg8, _, destOperand8) = ModRMDecoder.ReadModRM8();
-        var sourceOperand = OperandFactory.CreateRegisterOperand(reg, operandSize);
+            destinationOperand = destOperand8;
+            sourceOperand = OperandFactory.CreateRegisterOperand8(reg8);
+        }
+        else
+        {
+            // For 32-bit operands, use the standard ModR/M decoder
+            var (_, regStd, _, destOperandStd) = ModRMDecoder.ReadModRM();
+            destinationOperand = destOperandStd;
+            sourceOperand = OperandFactory.CreateRegisterOperand(regStd, operandSize);
+        }
         
         // Set the structured operands
         instruction.StructuredOperands = 

X86Disassembler/X86/Handlers/Mov/MovRegMemHandler.cs

@@ -50,13 +50,23 @@ public class MovRegMemHandler : InstructionHandler
         // For MOV r32, r/m32 (0x8B) or MOV r8, r/m8 (0x8A):
         // - The reg field specifies the destination register
         // - The r/m field with mod specifies the source operand (register or memory)
-        var (_, reg, _, sourceOperand) = ModRMDecoder.ReadModRM();
+        Operand sourceOperand;
+        Operand destinationOperand;
         
-        // Adjust the operand size based on the opcode
+        if (operandSize == 8)
-        sourceOperand.Size = operandSize;
+        {
-
+            // For 8-bit operands, use the 8-bit ModR/M decoder and factory methods
-        // Create the destination register operand
+            var (_, reg8, _, srcOperand8) = ModRMDecoder.ReadModRM8();
-        var destinationOperand = OperandFactory.CreateRegisterOperand(reg, operandSize);
+            sourceOperand = srcOperand8;
+            destinationOperand = OperandFactory.CreateRegisterOperand8(reg8);
+        }
+        else
+        {
+            // For 32-bit operands, use the standard ModR/M decoder
+            var (_, regStd, _, srcOperandStd) = ModRMDecoder.ReadModRM();
+            sourceOperand = srcOperandStd;
+            destinationOperand = OperandFactory.CreateRegisterOperand(regStd, operandSize);
+        }
         
         // Set the structured operands
         instruction.StructuredOperands = 

X86Disassembler/X86/Handlers/Mov/MovRm8Imm8Handler.cs

@@ -47,7 +47,7 @@ public class MovRm8Imm8Handler : InstructionHandler
         // For MOV r/m8, imm8 (0xC6):
         // - The r/m field with mod specifies the destination operand (register or memory)
         // - The immediate value is the source operand
-        var (_, reg, _, destinationOperand) = ModRMDecoder.ReadModRM();
+        var (_, reg, _, destinationOperand) = ModRMDecoder.ReadModRM8();
         
         // MOV r/m8, imm8 only uses reg=0
         if (reg != 0)
@@ -55,8 +55,7 @@ public class MovRm8Imm8Handler : InstructionHandler
             return false;
         }
         
-        // Adjust the operand size to 8-bit
+        // Note: The operand size is already set to 8-bit by the ReadModRM8 method
-        destinationOperand.Size = 8;
         
         // Read the immediate value
         if (!Decoder.CanReadByte())

X86Disassembler/X86/Handlers/Or/OrR8Rm8Handler.cs

@@ -46,13 +46,12 @@ public class OrR8Rm8Handler : InstructionHandler
         // For OR r8, r/m8 (0x0A):
         // - The reg field specifies the destination register
         // - The r/m field with mod specifies the source operand (register or memory)
-        var (_, reg, _, sourceOperand) = ModRMDecoder.ReadModRM();
+        var (_, reg, _, sourceOperand) = ModRMDecoder.ReadModRM8();
 
-        // Adjust the operand size to 8-bit
+        // Note: The operand size is already set to 8-bit by the ReadModRM8 method
-        sourceOperand.Size = 8;
 
-        // Create the destination register operand
+        // Create the destination register operand using the 8-bit register type
-        var destinationOperand = OperandFactory.CreateRegisterOperand(reg, 8);
+        var destinationOperand = OperandFactory.CreateRegisterOperand8(reg);
         
         // Set the structured operands
         instruction.StructuredOperands = 

X86Disassembler/X86/Handlers/Sub/SubImmFromRm16Handler.cs

@@ -62,10 +62,9 @@ public class SubImmFromRm16Handler : InstructionHandler
         // For SUB r/m16, imm16 (0x81 /5 with 0x66 prefix):
         // - The r/m field with mod specifies the destination operand (register or memory)
         // - The immediate value is the source operand
-        var (_, _, _, destinationOperand) = ModRMDecoder.ReadModRM();
+        var (_, _, _, destinationOperand) = ModRMDecoder.ReadModRM16();
 
-        // Adjust the operand size to 16-bit
+        // Note: The operand size is already set to 16-bit by the ReadModRM16 method
-        destinationOperand.Size = 16;
 
         // Check if we have enough bytes for the immediate value
         if (!Decoder.CanReadUShort())

X86Disassembler/X86/Handlers/Sub/SubImmFromRm16SignExtendedHandler.cs

@@ -62,10 +62,9 @@ public class SubImmFromRm16SignExtendedHandler : InstructionHandler
         // For SUB r/m16, imm8 (0x83 /5 with 0x66 prefix and sign extension):
         // - The r/m field with mod specifies the destination operand (register or memory)
         // - The immediate value is the source operand (sign-extended from 8 to 16 bits)
-        var (_, _, _, destinationOperand) = ModRMDecoder.ReadModRM();
+        var (_, _, _, destinationOperand) = ModRMDecoder.ReadModRM16();
 
-        // Adjust the operand size to 16-bit
+        // Note: The operand size is already set to 16-bit by the ReadModRM16 method
-        destinationOperand.Size = 16;
 
         // Check if we have enough bytes for the immediate value
         if (!Decoder.CanReadByte())

X86Disassembler/X86/Handlers/Sub/SubImmFromRm8Handler.cs

@@ -49,8 +49,7 @@ public class SubImmFromRm8Handler : InstructionHandler
         // Read the ModR/M byte, specifying that we're dealing with 8-bit operands
         var (_, _, _, destinationOperand) = ModRMDecoder.ReadModRM8();
         
-        // Ensure the destination operand has the correct size (8-bit)
+        // Note: The operand size is already set to 8-bit by the ReadModRM8 method
-        destinationOperand.Size = 8;
 
         // Read the immediate byte
         if (!Decoder.CanReadByte())

X86Disassembler/X86/Handlers/Sub/SubR16Rm16Handler.cs

@@ -43,14 +43,13 @@ public class SubR16Rm16Handler : InstructionHandler
             return false;
         }
 
-        // Read the ModR/M byte
+        // Read the ModR/M byte, specifying that we're dealing with 16-bit operands
-        var (_, reg, _, sourceOperand) = ModRMDecoder.ReadModRM();
+        var (_, reg, _, sourceOperand) = ModRMDecoder.ReadModRM16();
         
-        // Ensure the source operand has the correct size (16-bit)
+        // Note: The operand size is already set to 16-bit by the ReadModRM16 method
-        sourceOperand.Size = 16;
         
         // Create the destination register operand (16-bit)
-        var destinationOperand = OperandFactory.CreateRegisterOperand((RegisterIndex)reg, 16);
+        var destinationOperand = OperandFactory.CreateRegisterOperand(reg, 16);
         
         // Set the structured operands
         instruction.StructuredOperands = 

X86Disassembler/X86/Handlers/Sub/SubRm16R16Handler.cs

@@ -43,14 +43,13 @@ public class SubRm16R16Handler : InstructionHandler
             return false;
         }
 
-        // Read the ModR/M byte
+        // Read the ModR/M byte, specifying that we're dealing with 16-bit operands
-        var (_, reg, _, destinationOperand) = ModRMDecoder.ReadModRM();
+        var (_, reg, _, destinationOperand) = ModRMDecoder.ReadModRM16();
         
-        // Ensure the destination operand has the correct size (16-bit)
+        // Note: The operand size is already set to 16-bit by the ReadModRM16 method
-        destinationOperand.Size = 16;
         
         // Create the source register operand (16-bit)
-        var sourceOperand = OperandFactory.CreateRegisterOperand((RegisterIndex)reg, 16);
+        var sourceOperand = OperandFactory.CreateRegisterOperand(reg, 16);
         
         // Set the structured operands
         instruction.StructuredOperands =