* SimpleArray attached to FelicaData
* tx rx done. response parsing done (in log)
* dynamic vector as buffer. rendering begin
* On screen render for directory tree
* flags in render to indicate is_public_readable
* beautify render flags
* format
* offload dynamic vector into individual files
* saving. exposed dir tree writing for double use
* save: additional formatting
* save: clean up and some additional notes
* load done
* delete unnecessary debug log
* Load: safer way to handle backward compatibility
`parsed` being true is only contingent on whether the header (device type, UID, etc) are correctly read. The detailed data can be absent if saved from previous versions.
Side effects:
1. The data format version number must not increment.
2. Newer sections of dumps must be appended in the end of the file.
* format
* handle block reading according to IC type
Old version was aimed for FeliCa Lite dumping, which doesn't apply to FeliCa standard. Thus they need to be diverged in the poller run workflow.
* read block content works. rendering begin
* Render Refactor: dir & dump view from submenu
* Render: show IC type name
* IC parsing function cleanup
* Revert "IC parsing function cleanup"
This reverts commit ee3f7bf125.
* Load: Standard dump. Fully backward compatible
* format
* sync API version
* format saved file
* delete unused variable
* clean ups
* IC type addition
* correction
* beautify attribute parsing
* correction
* Lite save: delete extra line
* correction: FeliCa link in Lite-S mode
* format
* Save: simplify printing
* update IC type parsing
* conform to api standard: const resp ptr to ptr
also slightly faster and more readable block dump loop
* disambiguate workflow type vs ic type
It was too confusing to have the ic name string telling you one thing and ic_type enum saying the other. Might as well use better naming to indicate the use case for the two things
* beautify on device render
* reject dynamic_vector, embrace m-array
* lint
* use full variable name
* partial fix: poller context's data proper init
* edit unit test dump IC code
and a small bug fix for the Lite auth workflow
* unit test felica dump PMm correction
* Fixes for static analysis warnings
---------
Co-authored-by: hedger <hedger@nanode.su>
Co-authored-by: hedger <hedger@users.noreply.github.com>
* Fix Typos
* Tune decoders
* Better parsing, show more data in existing protocols
* Add new protocols
* Update keeloqs
* Add unit tests & raws
* Add honeywell unittest
* Comment until better solution is found
Adding GAPs to be sent first to make signal better suitable for decoder (decoding from only one signal sample) does nothing, needs something else
TODO: Fix encoders?
* suppressed missing issue warning
* subghz: re-enabled failing encoder tests
* Fix two?
3 left
* properly do gangqi and marantec for unit test and real use
* fix unit tests now
* fix possible memory leak
* reset decoder step too
* subghz: extra encoder safety; report random signal test results on failure
* unit_tests: subghz: renamed test file for consistency
* subghz: more explicit buffer position resets
* Fix gangqi samples
---------
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: hedger <hedger@nanode.su>
* Linear and dickert mahs fixes
* fix dip pattern
* proper fix
by WillyJL
* Fix unit tests
Linear Decoder now decodes more linear signals
---------
Co-authored-by: hedger <hedger@users.noreply.github.com>
* libs: stricter constness for saving RAM with .rodata section; fbt: sdk: fixed signature generation for nested const params
* hal: additional fixes for constness in USB subsystem
* debug apps: additional usb-related fixes
* mjs: more consts for token parser
* fatfs: const driver struct
* hal: more consts for ble & nfc vars
* hal: made FuriHalSpiBusHandle static
* hal: made FuriHalI2cBusHandle static
* usb: restored previous api
* linter fixes
* API fixes
* Move OTG controls to the power service
* Accessor: add missing power service import
* Power: add is_otg_enabled to info and properly handle OTG enable with VBUS voltage present
* Power: method naming
* Power: add backward compatibility with old-style use of furi_hal_power
* Scripts: lower MIN_GAP_PAGES to 1
* SubGhz: fix incorrect logging tag
* SubGhz: delegate OTG management to power service
* Power: fix condition race, various improvements
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* WIP: fix lost BadBLE keystrokes
* Switch to semaphores for synchronization
* Move checking to the gap level
* Remove leftovers from hid_service
* Remove more leftovers from hid_service
* De-allocate the semaphore after use
* Change the timeout to account for unforeseen situation
* Update F18 API
* Fix naming and unbump api version
* Move away from semaphores
* Remove the left over include
* Ble: cleanup error handling in ble_gatt_characteristic_update
* Fix PVS warning
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Added Dickert MAHS protocol
* Update protocol_items.c
* Added Dickert MAHS protocol reference
* Update protocol_items.h
* Removed logging and some defines
* Reworked the send code to properly adhere to Dickert timings
* Added subghz unit test for Dickert MAHS
* Minor fix in encoding length
* Added Dickert Decoder Test to subghz unit tests and set repeat=10
* SubGhz: cleanup dickert mahs code and documentation
* SubGhz: correct type in for statement in dickert mahs
Co-authored-by: あく <alleteam@gmail.com>
* Api Symbols: replace asserts with checks
* Api Symbols: replace asserts with checks part 2
* Update no args function signatures with void, to help compiler to track incorrect usage
* More unavoidable void
* Update PVS config and code to make it happy
* Format sources
* nfc: fix checks
* dead code cleanup & include fixes
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: hedger <hedger@nanode.su>
* Add Mastercode SubGHz Protocol
* Add 2 valid raw files and cleanup code
* Add tests to the two Raw Files
* Remove extra test & delete comments
* Fixes pulse length and shows correct Key
Co-authored-by: FlipperZelebro <flipperzelebro [at] gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* Furi: remove direct FreeRTOS timers use
* Furi: eliminate FreeRTOS headers leak. What did it cost? Everything...
* SubGhz: proper public api for protocols. Format Sources.
* Furi: slightly less redundant declarations
* Desktop: proper types in printf
* Sync API Symbols
* Furi: add timer reset and fix dolphin service, fix unit tests
* Furi: proper timer restart method naming and correct behavior in timer stopped state.
---------
Co-authored-by: hedger <hedger@nanode.su>
"A long time ago in a galaxy far, far away...." we started NFC subsystem refactoring.
Starring:
- @gornekich - NFC refactoring project lead, architect, senior developer
- @gsurkov - architect, senior developer
- @RebornedBrain - senior developer
Supporting roles:
- @skotopes, @DrZlo13, @hedger - general architecture advisors, code review
- @Astrrra, @doomwastaken, @Hellitron, @ImagineVagon333 - quality assurance
Special thanks:
@bettse, @pcunning, @nxv, @noproto, @AloneLiberty and everyone else who has been helping us all this time and contributing valuable knowledges, ideas and source code.
* Storage: count opened files
* Storage: sd mount
* Storage: prompt to mount SD card if not mounted
* F18: update API
* F18: update API version
* Fix logger naming scheme
* Storage: storage_files_count -> storage_open_files_count
Co-authored-by: あく <alleteam@gmail.com>
* added filename mode setting
* added furi_flag checks for when filename_mode is set
* changed naming for ibutton, lfrfid and subghz
* requested changes from PR
* Lib: gather all naming bits and pieces under name generator module. Properly bump api version. FuriHal: fix RTC flag enum.
* PR requested changes
* bug fix for arg type
* added functionality for other application scenes
* Lib: cleanup name generator API, simplify usage. Sync API symbols.
* Lib: proper size type in name_generator. Cleanup.
* FuriHal: cleanup rtc api usage across firmware
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: add protocol DataRAW (binarization of data quantized by the minimum correlated duration)
* SubGhz: fix name history
* SubGhz: add encoder Data_RAW protocol
* SubGhz: decreasing the size of the LevelDuration structure
* SubGhz: history, added check that there is free RAM
* SubGhz: checking for free memory, support to pass without gap
* SubGhz: add running average to average the result, auto cut noise at the end of a burst
* SubGhz: support for repeating sequences
* SubGhz: fix secplus_v2 decoder
* SubGhz: bin_RAW fix add history
* SubGhz: add debug
* SubGhz: debug refactoring
* FURI_LOG: add FURI_LOG_RAW_x formatted string output like printf
* SubGhz: fix new FURI_LOG metod
* FURI_LOG: fix unit test
* SubGhz: add enable/disable BinRAW protocol decoding
* SubGhz: fix PVS
* SubGhz: forcibly turn off the speaker when exiting SubGhz
* SubGhz: adaptive adjustment to the noise level
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: Fix recording RAW files, sometimes could not start at a high level
* SubGhz: subghz_worker, add short duration filter setting
* SubGhz: capture raw timings in cli. Furi: clear pending interrupts on ISR set/reset
* SubGhz: fix start duration in furi_hal_subghz_start_async_rx
* [FL-3093] SubGhz: hopping issue in some regions
* [FL-3087] SubGhz: fix delete-ok issue
* SubGhz: remove copypasta from rx_raw cli command
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* First part of multitarget porting
* Delete firmware/targets/f7/Inc directory
* Delete firmware/targets/f7/Src directory
* gpio: cli fixes; about: using version from HAL
* sdk: path fixes
* gui: include fixes
* applications: more include fixes
* gpio: ported to new apis
* hal: introduced furi_hal_target_hw.h; libs: added one_wire
* hal: f18 target
* github: also build f18 by default
* typo fix
* fbt: removed extra checks on app list
* api: explicitly bundling select mlib headers with sdk
* hal: f18: changed INPUT_DEBOUNCE_TICKS to match f7
* cleaned up commented out code
* docs: added info on hw targets
* docs: targets: formatting fixes
* f18: fixed link error
* f18: fixed API version to match f7
* docs: hardware: minor wording fixes
* faploader: added fw target check
* docs: typo fixes
* github: not building komi target by default
* fbt: support for `targets` field for built-in apps
* github: reworked build flow to exclude app_set; fbt: removed komi-specific appset; added additional target buildset check
* github: fixed build; nfc: fixed pvs warnings
* attempt to fix target id
* f7, f18: removed certain HAL function from public API
* apps: debug: enabled bt_debug_app for f18
* Targets: backport input pins configuration routine from F7 to F18
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
