lib/drivers/bq27220_reg.h

#pragma once

#define BQ27220_ADDRESS     (0xAAu)
#define BQ27220_I2C_TIMEOUT (50u)

#define CommandControl             (0x00u)
#define CommandAtRate              (0x02u)
#define CommandAtRateTimeToEmpty   (0x04u)
#define CommandTemperature         (0x06u)
#define CommandVoltage             (0x08u)
#define CommandBatteryStatus       (0x0Au)
#define CommandCurrent             (0x0Cu)
#define CommandRemainingCapacity   (0x10u)
#define CommandFullChargeCapacity  (0x12u)
#define CommandAverageCurrent      (0x14u)
#define CommandTimeToEmpty         (0x16u)
#define CommandTimeToFull          (0x18u)
#define CommandStandbyCurrent      (0x1Au)
#define CommandStandbyTimeToEmpty  (0x1Cu)
#define CommandMaxLoadCurrent      (0x1Eu)
#define CommandMaxLoadTimeToEmpty  (0x20u)
#define CommandRawCoulombCount     (0x22u)
#define CommandAveragePower        (0x24u)
#define CommandInternalTemperature (0x28u)
#define CommandCycleCount          (0x2Au)
#define CommandStateOfCharge       (0x2Cu)
#define CommandStateOfHealth       (0x2Eu)
#define CommandChargeVoltage       (0x30u)
#define CommandChargeCurrent       (0x32u)
#define CommandBTPDischargeSet     (0x34u)
#define CommandBTPChargeSet        (0x36u)
#define CommandOperationStatus     (0x3Au)
#define CommandDesignCapacity      (0x3Cu)
#define CommandSelectSubclass      (0x3Eu)
#define CommandMACData             (0x40u)
#define CommandMACDataSum          (0x60u)
#define CommandMACDataLen          (0x61u)
#define CommandAnalogCount         (0x79u)
#define CommandRawCurrent          (0x7Au)
#define CommandRawVoltage          (0x7Cu)
#define CommandRawIntTemp          (0x7Eu)

#define Control_CONTROL_STATUS         (0x0000u)
#define Control_DEVICE_NUMBER          (0x0001u)
#define Control_FW_VERSION             (0x0002u)
#define Control_HW_VERSION             (0x0003u)
#define Control_BOARD_OFFSET           (0x0009u)
#define Control_CC_OFFSET              (0x000Au)
#define Control_CC_OFFSET_SAVE         (0x000Bu)
#define Control_OCV_CMD                (0x000Cu)
#define Control_BAT_INSERT             (0x000Du)
#define Control_BAT_REMOVE             (0x000Eu)
#define Control_SET_SNOOZE             (0x0013u)
#define Control_CLEAR_SNOOZE           (0x0014u)
#define Control_SET_PROFILE_1          (0x0015u)
#define Control_SET_PROFILE_2          (0x0016u)
#define Control_SET_PROFILE_3          (0x0017u)
#define Control_SET_PROFILE_4          (0x0018u)
#define Control_SET_PROFILE_5          (0x0019u)
#define Control_SET_PROFILE_6          (0x001Au)
#define Control_CAL_TOGGLE             (0x002Du)
#define Control_SEALED                 (0x0030u)
#define Control_RESET                  (0x0041u)
#define Control_OERATION_STATUS        (0x0054u)
#define Control_GAUGING_STATUS         (0x0056u)
#define Control_EXIT_CAL               (0x0080u)
#define Control_ENTER_CAL              (0x0081u)
#define Control_ENTER_CFG_UPDATE       (0x0090u)
#define Control_EXIT_CFG_UPDATE_REINIT (0x0091u)
#define Control_EXIT_CFG_UPDATE        (0x0092u)
#define Control_RETURN_TO_ROM          (0x0F00u)

#define UnsealKey1 (0x0414u)
#define UnsealKey2 (0x3672u)

#define FullAccessKey (0xffffu)
Power: bq25896 and bq27220 drivers, portable power api. (#224) * Power: add portability layer, port to F3. * F3: bq25896 driver stab * GUI: new primary and secondary fonts * F3: bq25896 register map, basic functions * F3: move bq27220 command descritpion to separate file. Code format. * Power: OTG enable/disable * Power: choose more correct profile * F3: pet bq25896 watchdog sometimes 2020-11-11 09:31:35 +03:00			`#pragma once`

FuriHal, drivers: rework gauge initialization routine (#3912) * FuriHal, drivers: rework gauge initialization, ensure that we can recover from any kind of internal/external issue * Make PVS happy * Format sources * bq27220: add gaps injection into write operations * Drivers: bq27220 cleanup and various fixes * Drivers: bq27220 verbose logging and full access routine fix * Drivers: better cfg mode exit handling in bq27220 driver * Drivers: rewrite bq27220 based on bqstudio+ev2400, experiments and guessing. Fixes all known issues. * PVS: hello license check * Drivers: minimize reset count in bq27220 init sequence * Drivers: bq27220 hide debug logging, reorganize routine to ensure predictable result and minimum amount of interaction with gauge, add documentation and notes. * Drivers: more reliable bq27220_full_access routine * Drivers: replace some warning with error in bq27220 * Drivers: move static asserts to headers in bq27220 * Fix PVS warnings * Drivers: simplify logic in bq27220 --------- Co-authored-by: hedger <hedger@users.noreply.github.com> 2024-10-06 19:36:05 +01:00			`#define BQ27220_ADDRESS (0xAAu)`
			`#define BQ27220_I2C_TIMEOUT (50u)`
Power: bq25896 and bq27220 drivers, portable power api. (#224) * Power: add portability layer, port to F3. * F3: bq25896 driver stab * GUI: new primary and secondary fonts * F3: bq25896 register map, basic functions * F3: move bq27220 command descritpion to separate file. Code format. * Power: OTG enable/disable * Power: choose more correct profile * F3: pet bq25896 watchdog sometimes 2020-11-11 09:31:35 +03:00
FuriHal, drivers: rework gauge initialization routine (#3912) * FuriHal, drivers: rework gauge initialization, ensure that we can recover from any kind of internal/external issue * Make PVS happy * Format sources * bq27220: add gaps injection into write operations * Drivers: bq27220 cleanup and various fixes * Drivers: bq27220 verbose logging and full access routine fix * Drivers: better cfg mode exit handling in bq27220 driver * Drivers: rewrite bq27220 based on bqstudio+ev2400, experiments and guessing. Fixes all known issues. * PVS: hello license check * Drivers: minimize reset count in bq27220 init sequence * Drivers: bq27220 hide debug logging, reorganize routine to ensure predictable result and minimum amount of interaction with gauge, add documentation and notes. * Drivers: more reliable bq27220_full_access routine * Drivers: replace some warning with error in bq27220 * Drivers: move static asserts to headers in bq27220 * Fix PVS warnings * Drivers: simplify logic in bq27220 --------- Co-authored-by: hedger <hedger@users.noreply.github.com> 2024-10-06 19:36:05 +01:00			`#define CommandControl (0x00u)`
			`#define CommandAtRate (0x02u)`
			`#define CommandAtRateTimeToEmpty (0x04u)`
			`#define CommandTemperature (0x06u)`
			`#define CommandVoltage (0x08u)`
			`#define CommandBatteryStatus (0x0Au)`
			`#define CommandCurrent (0x0Cu)`
			`#define CommandRemainingCapacity (0x10u)`
			`#define CommandFullChargeCapacity (0x12u)`
			`#define CommandAverageCurrent (0x14u)`
			`#define CommandTimeToEmpty (0x16u)`
			`#define CommandTimeToFull (0x18u)`
			`#define CommandStandbyCurrent (0x1Au)`
			`#define CommandStandbyTimeToEmpty (0x1Cu)`
			`#define CommandMaxLoadCurrent (0x1Eu)`
			`#define CommandMaxLoadTimeToEmpty (0x20u)`
			`#define CommandRawCoulombCount (0x22u)`
			`#define CommandAveragePower (0x24u)`
			`#define CommandInternalTemperature (0x28u)`
			`#define CommandCycleCount (0x2Au)`
			`#define CommandStateOfCharge (0x2Cu)`
			`#define CommandStateOfHealth (0x2Eu)`
			`#define CommandChargeVoltage (0x30u)`
			`#define CommandChargeCurrent (0x32u)`
			`#define CommandBTPDischargeSet (0x34u)`
			`#define CommandBTPChargeSet (0x36u)`
			`#define CommandOperationStatus (0x3Au)`
			`#define CommandDesignCapacity (0x3Cu)`
			`#define CommandSelectSubclass (0x3Eu)`
			`#define CommandMACData (0x40u)`
			`#define CommandMACDataSum (0x60u)`
			`#define CommandMACDataLen (0x61u)`
			`#define CommandAnalogCount (0x79u)`
			`#define CommandRawCurrent (0x7Au)`
			`#define CommandRawVoltage (0x7Cu)`
			`#define CommandRawIntTemp (0x7Eu)`
Power: bq25896 and bq27220 drivers, portable power api. (#224) * Power: add portability layer, port to F3. * F3: bq25896 driver stab * GUI: new primary and secondary fonts * F3: bq25896 register map, basic functions * F3: move bq27220 command descritpion to separate file. Code format. * Power: OTG enable/disable * Power: choose more correct profile * F3: pet bq25896 watchdog sometimes 2020-11-11 09:31:35 +03:00
FuriHal, drivers: rework gauge initialization routine (#3912) * FuriHal, drivers: rework gauge initialization, ensure that we can recover from any kind of internal/external issue * Make PVS happy * Format sources * bq27220: add gaps injection into write operations * Drivers: bq27220 cleanup and various fixes * Drivers: bq27220 verbose logging and full access routine fix * Drivers: better cfg mode exit handling in bq27220 driver * Drivers: rewrite bq27220 based on bqstudio+ev2400, experiments and guessing. Fixes all known issues. * PVS: hello license check * Drivers: minimize reset count in bq27220 init sequence * Drivers: bq27220 hide debug logging, reorganize routine to ensure predictable result and minimum amount of interaction with gauge, add documentation and notes. * Drivers: more reliable bq27220_full_access routine * Drivers: replace some warning with error in bq27220 * Drivers: move static asserts to headers in bq27220 * Fix PVS warnings * Drivers: simplify logic in bq27220 --------- Co-authored-by: hedger <hedger@users.noreply.github.com> 2024-10-06 19:36:05 +01:00			`#define Control_CONTROL_STATUS (0x0000u)`
			`#define Control_DEVICE_NUMBER (0x0001u)`
			`#define Control_FW_VERSION (0x0002u)`
			`#define Control_HW_VERSION (0x0003u)`
			`#define Control_BOARD_OFFSET (0x0009u)`
			`#define Control_CC_OFFSET (0x000Au)`
			`#define Control_CC_OFFSET_SAVE (0x000Bu)`
			`#define Control_OCV_CMD (0x000Cu)`
			`#define Control_BAT_INSERT (0x000Du)`
			`#define Control_BAT_REMOVE (0x000Eu)`
			`#define Control_SET_SNOOZE (0x0013u)`
			`#define Control_CLEAR_SNOOZE (0x0014u)`
			`#define Control_SET_PROFILE_1 (0x0015u)`
			`#define Control_SET_PROFILE_2 (0x0016u)`
			`#define Control_SET_PROFILE_3 (0x0017u)`
			`#define Control_SET_PROFILE_4 (0x0018u)`
			`#define Control_SET_PROFILE_5 (0x0019u)`
			`#define Control_SET_PROFILE_6 (0x001Au)`
			`#define Control_CAL_TOGGLE (0x002Du)`
			`#define Control_SEALED (0x0030u)`
			`#define Control_RESET (0x0041u)`
			`#define Control_OERATION_STATUS (0x0054u)`
			`#define Control_GAUGING_STATUS (0x0056u)`
			`#define Control_EXIT_CAL (0x0080u)`
			`#define Control_ENTER_CAL (0x0081u)`
			`#define Control_ENTER_CFG_UPDATE (0x0090u)`
			`#define Control_EXIT_CFG_UPDATE_REINIT (0x0091u)`
			`#define Control_EXIT_CFG_UPDATE (0x0092u)`
			`#define Control_RETURN_TO_ROM (0x0F00u)`

			`#define UnsealKey1 (0x0414u)`
			`#define UnsealKey2 (0x3672u)`

			`#define FullAccessKey (0xffffu)`