From 6947efae2749788523d6cce9355d739d1c953c99 Mon Sep 17 00:00:00 2001
From: DerSkythe <31771569+derskythe@users.noreply.github.com>
Date: Wed, 24 Jul 2024 19:05:14 +0400
Subject: [PATCH] Update Firmware update on Developer Board.md

Signed-off-by: DerSkythe <31771569+derskythe@users.noreply.github.com>
---
 .../devboard/Firmware update on Developer Board.md  | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/documentation/devboard/Firmware update on Developer Board.md b/documentation/devboard/Firmware update on Developer Board.md
index 1cd205023..0df5c1f7d 100644
--- a/documentation/devboard/Firmware update on Developer Board.md	
+++ b/documentation/devboard/Firmware update on Developer Board.md	
@@ -52,13 +52,13 @@ If you want to learn more about uFBT, visit [the project's page](https://pypi.or
     ```
     View the devices in the list.
 2. Connect the Developer Board to your computer using a USB-C cable.
-![The Developer Board in Wired mode](https://archbee-image-uploads.s3.amazonaws.com/3StCFqarJkJQZV-7N79yY/Aq7gfMI-m_5H6sGGjwb4I_monosnap-miro-2023-07-19-19-47-39.jpg)
-3. Switch your Developer Board to Bootloader mode:
+![The Developer Board in Wired mode](https://github.com/user-attachments/assets/d13e4e90-d83d-45bf-8787-6eadba590795)
+4. Switch your Developer Board to Bootloader mode:
     3.1.  Press and hold the **BOOT** button.
     3.2.  Press the **RESET** button while holding the **BOOT** button.
     3.3. Release the **BOOT** button.
-![You can easily switch the Dev Board to Bootloader mode](https://archbee-image-uploads.s3.amazonaws.com/3StCFqarJkJQZV-7N79yY/KynP9iT6sJ3mXLaLyI82__image.png)
-4. Repeat Step 1 and view the name of your Developer Board that appeared in the list.
+   ![You can easily switch the Dev Board to Bootloader mode](https://github.com/user-attachments/assets/aecc957f-f37b-4bec-af9f-9efd4837152e)
+6. Repeat Step 1 and view the name of your Developer Board that appeared in the list.
 
     For example, on macOS:
 
@@ -98,8 +98,7 @@ Try doing the following:
 ## Finishing the installation
 
 After flashing the firmware:
-1. Reboot the Developer Board by pressing the **RESET** button.
-![Reset the Developer Board](https://archbee-image-uploads.s3.amazonaws.com/3StCFqarJkJQZV-7N79yY/rcQeKARgrVwa51tLoo-qY_monosnap-miro-2023-07-20-18-29-33.jpg)
-2. Disconnect and reconnect the USB-C cable.
+1. Reboot the Developer Board by pressing the **RESET** button. ![Reset the Developer Board](https://github.com/user-attachments/assets/7527dd7b-eaa5-4fac-8d67-7ba52e552756)
+3. Disconnect and reconnect the USB-C cable.
 
 The Developer Board should appear as a serial device on your computer. Now, you can use it with the Black Magic Debug client of your choice.