From fdde5856b8660558ff26414c7c75522434a71dce Mon Sep 17 00:00:00 2001 From: MX <10697207+xMasterX@users.noreply.github.com> Date: Tue, 13 Feb 2024 17:48:49 +0300 Subject: [PATCH] upd docs --- ReadMe.md | 2 +- documentation/SubGHzRemoteProg.md | 7 +++++++ 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/ReadMe.md b/ReadMe.md index f0e45d585..9f3bcc872 100644 --- a/ReadMe.md +++ b/ReadMe.md @@ -61,7 +61,7 @@ - **Hold right in received signal list to delete selected signal** - **Custom buttons for Keeloq / Alutech AT4N / Nice Flor S / Somfy Telis / Security+ 2.0 / CAME Atomo** - now you can use arrow buttons to send signal with different button code - `Add manually` menu extended with new protocols - - FAAC SLH, BFT Mitto / Somfy Telis / Nice Flor S / CAME Atomo, etc.. manual creation with programming new remote into receiver (use button 0xF for BFT Mitto, 0x8 (Prog) on Somfy Telis) + - FAAC SLH, BFT Mitto / Somfy Telis / Nice Flor S / CAME Atomo, etc.. manual creation with programming new remote into receiver (use button 0xF for BFT Mitto, 0x8 (Prog) on Somfy Telis, (right arrow button for other protocols)) - Debug mode counter increase settings (+1 -> +5, +10, default: +1) - Debug PIN output settings for protocol development diff --git a/documentation/SubGHzRemoteProg.md b/documentation/SubGHzRemoteProg.md index 0a799fc58..1c14678f5 100644 --- a/documentation/SubGHzRemoteProg.md +++ b/documentation/SubGHzRemoteProg.md @@ -29,6 +29,13 @@ SEED -> Your seed from the remote button you got earlier 8. Flipper will act as new remote, press Send button couple times near the receiver to register new remote 9. Done! +## Dea Mio +1. Create new remote with randomly generated serial: Go to SubGHz -> Add Manually -> Dea Mio 433Mhz +2. Open your new remote file +3. Right arrow button on the flipper simulates press of hidden button in original remote +4. Send button simulates one of basic buttons of the remote, can be programmed into the receiver +5. Follow manufacturer instructions on new remotes programming + ## AN-Motors AT4 **This instruction for older boards, if your has no** `Learn` **button but has buttons** `F`, `CL`, `+`, `-` **read instruction from Alutech AT4N**