mirror of
https://github.com/DarkFlippers/unleashed-firmware.git
synced 2025-12-12 04:34:43 +04:00
93 lines
4.7 KiB
C
93 lines
4.7 KiB
C
#pragma once
|
|
|
|
#include "nxp_native_command_mode.h"
|
|
|
|
#include <lib/nfc/protocols/iso14443_4a/iso14443_4a_poller.h>
|
|
|
|
// ISO 7816 command wrapping
|
|
#define NXP_NATIVE_COMMAND_ISO_CLA (0x90)
|
|
#define NXP_NATIVE_COMMAND_ISO_P1 (0x00)
|
|
#define NXP_NATIVE_COMMAND_ISO_P2 (0x00)
|
|
#define NXP_NATIVE_COMMAND_ISO_LE (0x00)
|
|
// ISO 7816 status wrapping
|
|
#define NXP_NATIVE_COMMAND_ISO_SW1 (0x91)
|
|
|
|
// Successful operation
|
|
#define NXP_NATIVE_COMMAND_STATUS_OPERATION_OK (0x00)
|
|
// No changes done to backup files, CommitTransaction / AbortTransaction not necessary
|
|
#define NXP_NATIVE_COMMAND_STATUS_NO_CHANGES (0x0C)
|
|
// Insufficient NV-Memory to complete command
|
|
#define NXP_NATIVE_COMMAND_STATUS_OUT_OF_EEPROM_ERROR (0x0E)
|
|
// Command code not supported
|
|
#define NXP_NATIVE_COMMAND_STATUS_ILLEGAL_COMMAND_CODE (0x1C)
|
|
// CRC or MAC does not match data Padding bytes not valid
|
|
#define NXP_NATIVE_COMMAND_STATUS_INTEGRITY_ERROR (0x1E)
|
|
// Invalid key number specified
|
|
#define NXP_NATIVE_COMMAND_STATUS_NO_SUCH_KEY (0x40)
|
|
// Length of command string invalid
|
|
#define NXP_NATIVE_COMMAND_STATUS_LENGTH_ERROR (0x7E)
|
|
// Current configuration / status does not allow the requested command
|
|
#define NXP_NATIVE_COMMAND_STATUS_PERMISSION_DENIED (0x9D)
|
|
// Value of the parameter(s) invalid
|
|
#define NXP_NATIVE_COMMAND_STATUS_PARAMETER_ERROR (0x9E)
|
|
// Requested AID not present on PICC
|
|
#define NXP_NATIVE_COMMAND_STATUS_APPLICATION_NOT_FOUND (0xA0)
|
|
// Unrecoverable error within application, application will be disabled
|
|
#define NXP_NATIVE_COMMAND_STATUS_APPL_INTEGRITY_ERROR (0xA1)
|
|
// Currently not allowed to authenticate. Keep trying until full delay is spent
|
|
#define NXP_NATIVE_COMMAND_STATUS_STATUS_AUTHENTICATION_DELAY (0xAD)
|
|
// Current authentication status does not allow the requested command
|
|
#define NXP_NATIVE_COMMAND_STATUS_AUTHENTICATION_ERROR (0xAE)
|
|
// Additional data frame is expected to be sent
|
|
#define NXP_NATIVE_COMMAND_STATUS_ADDITIONAL_FRAME (0xAF)
|
|
// Attempt to read/write data from/to beyond the file's/record's limits
|
|
// Attempt to exceed the limits of a value file.
|
|
#define NXP_NATIVE_COMMAND_STATUS_BOUNDARY_ERROR (0xBE)
|
|
// Unrecoverable error within PICC, PICC will be disabled
|
|
#define NXP_NATIVE_COMMAND_STATUS_PICC_INTEGRITY_ERROR (0xC1)
|
|
// Previous Command was not fully completed. Not all Frames were requested or provided by the PCD
|
|
#define NXP_NATIVE_COMMAND_STATUS_COMMAND_ABORTED (0xCA)
|
|
// PICC was disabled by an unrecoverable error
|
|
#define NXP_NATIVE_COMMAND_STATUS_PICC_DISABLED_ERROR (0xCD)
|
|
// Number of Applications limited to 28, no additional CreateApplication possible
|
|
#define NXP_NATIVE_COMMAND_STATUS_COUNT_ERROR (0xCE)
|
|
// Creation of file/application failed because file/application with same number already exists
|
|
#define NXP_NATIVE_COMMAND_STATUS_DUBLICATE_ERROR (0xDE)
|
|
// Could not complete NV-write operation due to loss of power, internal backup/rollback mechanism activated
|
|
#define NXP_NATIVE_COMMAND_STATUS_EEPROM_ERROR (0xEE)
|
|
// Specified file number does not exist
|
|
#define NXP_NATIVE_COMMAND_STATUS_FILE_NOT_FOUND (0xF0)
|
|
// Unrecoverable error within file, file will be disabled
|
|
#define NXP_NATIVE_COMMAND_STATUS_FILE_INTEGRITY_ERROR (0xF1)
|
|
|
|
typedef uint8_t NxpNativeCommandStatus;
|
|
|
|
/**
|
|
* @brief Transmit and receive NXP Native Command chunks in poller mode.
|
|
*
|
|
* Must ONLY be used inside the callback function.
|
|
*
|
|
* The result_buffer will be filled with any data received as a response to data
|
|
* sent from input_buffer, with a timeout defined by the fwt parameter.
|
|
*
|
|
* The tx_buffer and rx_buffer are used as working areas to handle individual
|
|
* command chunks and responses.
|
|
*
|
|
* @param[in, out] iso14443_4a_poller pointer to the instance to be used in the transaction.
|
|
* @param[out] status_code pointer to a status variable to hold the result of the operation.
|
|
* @param[in] input_buffer pointer to the buffer containing the data to be transmitted.
|
|
* @param[out] result_buffer pointer to the buffer to be filled with received data.
|
|
* @param[in] command_mode what command formatting mode to use for the transaction.
|
|
* @param[in, out] tx_buffer pointer to the buffer for command construction.
|
|
* @param[in, out] rx_buffer pointer to the buffer for response handling.
|
|
* @return Iso14443_4aErrorNone and STATUS_OPERATION_OK on success, an error code on failure.
|
|
*/
|
|
Iso14443_4aError nxp_native_command_iso14443_4a_poller(
|
|
Iso14443_4aPoller* iso14443_4a_poller,
|
|
NxpNativeCommandStatus* status_code,
|
|
const BitBuffer* input_buffer,
|
|
BitBuffer* result_buffer,
|
|
NxpNativeCommandMode command_mode,
|
|
BitBuffer* tx_buffer,
|
|
BitBuffer* rx_buffer);
|