mirrors/uv-k5-firmware-custom
0
Fork 0
mirror of https://github.com/OneOfEleven/uv-k5-firmware-custom.git synced 2025-06-19 22:58:04 +03:00
Code Issues Releases Activity

Renames 'ENABLE_SQUELCH_LOWER'. Added faster channel scan option (but makes squelch/grn-LED/back-light more twitchy)

Browse Source
This commit is contained in:
OneOfEleven
2023-10-03 11:32:04 +01:00
parent b3ca095af1
commit 010ea0308a
8 changed files with 47 additions and 40 deletions
Download Patch File Download Diff File Expand all files Collapse all files

35
README.md
View File

@ -27,34 +27,35 @@ You'll find the options at the top of "Makefile" ('0' = disable, '1' = enable) .
```
ENABLE_SWD := 0 only needed if using CPU's SWD port (debugging/programming)
ENABLE_OVERLAY := 0 cpu FLASH stuff
ENABLE_LTO := 0 **experimental, reduces size of compiled firmware but might break EEPROM reads - DISABLE overlay if you enable this
ENABLE_UART := 1 without this you can't configure radio via PC
ENABLE_AIRCOPY := 0 easier to just enter frequency
ENABLE_FMRADIO := 1 WBFM VHF band 2 RX
ENABLE_NOAA := 0 everything NOAA
ENABLE_OVERLAY := 0 cpu FLASH stuff, not needed
ENABLE_LTO := 0 **experimental, reduces size of compiled firmware but might break EEPROM reads (overlay will be disabled if you enable this)
ENABLE_UART := 1 without this you can't configure radio via PC !
ENABLE_AIRCOPY := 0 easier to just enter frequency with butts
ENABLE_FMRADIO := 1 WBFM VHF broadcast band receiver
ENABLE_NOAA := 0 everything NOAA (only of any use in the USA)
ENABLE_VOICE := 0 want to hear voices ?
ENABLE_ALARM := 0 TX alarms
ENABLE_1750HZ := 0 side key 1750Hz TX tone
ENABLE_BIG_FREQ := 0 big font frequencies
ENABLE_1750HZ := 0 side key 1750Hz TX tone (older style repeater access)
ENABLE_BIG_FREQ := 0 big font frequencies (like original QS firmware)
ENABLE_SMALL_BOLD := 1 bold channel name/no. (when name + freq channel display mode)
ENABLE_KEEP_MEM_NAME := 1 maintain channel name when (re)saving memory channel
ENABLE_WIDE_RX := 1 full 18MHz to 1300MHz RX (though frontend not tuned over full range)
ENABLE_WIDE_RX := 1 full 18MHz to 1300MHz RX (though front-end/PA not designed for full range)
ENABLE_TX_WHEN_AM := 0 allow TX (always FM) when RX is set to AM
ENABLE_F_CAL_MENU := 0 enable/disable the radios hidden frequency calibration menu
ENABLE_CTCSS_TAIL_PHASE_SHIFT := 1 standard CTCSS tail phase shift rather than QS's own 55Hz tone method
ENABLE_MAIN_KEY_HOLD := 1 initial F-key press not needed, instead hold down keys 0-9 to access the functions
ENABLE_BOOT_BEEPS := 0 give user audio feedback on volume knob position at boot-up
ENABLE_MAIN_KEY_HOLD := 1 initial F-key press not needed, instead just hold down keys 0-9 to access the secondary butt functions
ENABLE_BOOT_BEEPS := 0 gives user audio feedback on volume knob position at boot-up
ENABLE_COMPANDER := 1 compander option (per channel)
ENABLE_SHOW_CHARGE_LEVEL := 0 show the charge level when the radio is on charge
ENABLE_REVERSE_BAT_SYMBOL := 1 mirror the battery symbol on the status bar (+ pole on the right)
ENABLE_CODE_SCAN_TIMEOUT := 0 enable/disable 32-sec CTCSS/DCS scan timeout (press exit butt to end scan if disabled)
ENABLE_AM_FIX := 1 dynamically adjust the front end gains when in AM mode to helo prevent AM demodulator saturation - ignore the on-screen RSSI (for now)
ENABLE_AM_FIX_SHOW_DATA := 1 show debug data for the AM fix
ENABLE_SQUELCH_LOWER := 1 squelch settings more sensitive - plan to let user adjust it in the menu
ENABLE_RSSI_BAR := 1 enable a dBm/Sx RSSI bar graph level
ENABLE_CODE_SCAN_TIMEOUT := 0 enable/disable 32-sec CTCSS/DCS scan timeout (press exit butt instead of time-out to end scan)
ENABLE_AM_FIX := 1 dynamically adjust the front end gains when in AM mode to helo prevent AM demodulator saturation, ignore the on-screen RSSI level (for now)
ENABLE_AM_FIX_SHOW_DATA := 1 show debug data for the AM fix (still tweaking it)
ENABLE_SQUELCH_MORE_SENSITIVE := 1 make squelch levels a little bit more sensitive - I plan to let user adjust the values themselves
ENABLE_FASTER_CHANNEL_SCAN := 0 increases the channel scan speed, but the squelch is also made more twitchy
ENABLE_RSSI_BAR := 1 enable a dBm/Sn RSSI bar graph level inplace of the little antenna symbols
ENABLE_AUDIO_BAR := 0 experimental, display an audo bar level when TX'ing
#ENABLE_COPY_CHAN_TO_VFO := 1 not yet implemented - copy the channel into the VFO
#ENABLE_COPY_CHAN_TO_VFO := 1 not yet implemented - copy the current channel into the VFO
#ENABLE_SINGLE_VFO_CHAN := 1 not yet implemented - single VFO on display when possible
#ENABLE_BAND_SCOPE := 1 not yet implemented - spectrum/pan-adapter
```