Backlight TX/RX menu update

Makefile

@@ -23,7 +23,6 @@ ENABLE_F_CAL_MENU             := 0
 ENABLE_CTCSS_TAIL_PHASE_SHIFT := 1
 ENABLE_MAIN_KEY_HOLD          := 1
 ENABLE_BOOT_BEEPS             := 0
-ENABLE_COMPANDER              := 1
 ENABLE_SHOW_CHARGE_LEVEL      := 1
 ENABLE_REVERSE_BAT_SYMBOL     := 1
 ENABLE_CODE_SCAN_TIMEOUT      := 0
@@ -232,9 +231,6 @@ endif
 ifeq ($(ENABLE_BOOT_BEEPS),1)
 	CFLAGS  += -DENABLE_BOOT_BEEPS
 endif
-ifeq ($(ENABLE_COMPANDER),1)
-	CFLAGS  += -DENABLE_COMPANDER
-endif
 ifeq ($(ENABLE_SHOW_CHARGE_LEVEL),1)
 	CFLAGS  += -DENABLE_SHOW_CHARGE_LEVEL
 endif

README.md

@@ -46,7 +46,6 @@ ENABLE_F_CAL_MENU             := 0       enable/disable the radios hidden freque
 ENABLE_CTCSS_TAIL_PHASE_SHIFT := 1       standard CTCSS tail phase shift rather than QS's own 55Hz tone method
 ENABLE_MAIN_KEY_HOLD          := 1       initial F-key press not needed, instead just hold down keys 0-9 to access the secondary butt functions
 ENABLE_BOOT_BEEPS             := 0       gives user audio feedback on volume knob position at boot-up
-ENABLE_COMPANDER              := 0       compander option (per channel)
 ENABLE_SHOW_CHARGE_LEVEL      := 0       show the charge level when the radio is on charge
 ENABLE_REVERSE_BAT_SYMBOL     := 1       mirror the battery symbol on the status bar (+ pole on the right)
 ENABLE_CODE_SCAN_TIMEOUT      := 0       enable/disable 32-sec CTCSS/DCS scan timeout (press exit butt instead of time-out to end scan)

app/app.c

@@ -486,7 +486,7 @@ void APP_StartListening(FUNCTION_Type_t Function, const bool reset_am_fix)
 
 	gEnableSpeaker = true;
 
-	if (gSetting_backlight_on_tx_rx)
+	if (gSetting_backlight_on_tx_rx >= 2)
 		BACKLIGHT_TurnOn();
 
 	if (gScanState != SCAN_OFF)
@@ -2104,6 +2104,7 @@ static void APP_ProcessKey(KEY_Code_t Key, bool bKeyPressed, bool bKeyHeld)
 	}
 	else
 	{
+		if (Key != KEY_PTT)
 			BACKLIGHT_TurnOn();
 
 		if (Key == KEY_EXIT && bKeyHeld)

app/menu.c

@@ -199,12 +199,11 @@ int MENU_GetLimits(uint8_t Cursor, int32_t *pMin, int32_t *pMax)
 			*pMax = ARRAY_SIZE(gSubMenu_RESET) - 1;
 			break;
 
-		#ifdef ENABLE_COMPANDER
 		case MENU_COMPAND:
+		case MENU_ABR_ON_TX_RX:
 			*pMin = 0;
-				*pMax = ARRAY_SIZE(gSubMenu_Compand) - 1;
+			*pMax = ARRAY_SIZE(gSubMenu_RX_TX) - 1;
 			break;
-		#endif
 
 		#ifdef ENABLE_AM_FIX_TEST1
 			case MENU_AM_FIX_TEST1:
@@ -219,7 +218,6 @@ int MENU_GetLimits(uint8_t Cursor, int32_t *pMin, int32_t *pMax)
 		#ifdef ENABLE_AUDIO_BAR
 			case MENU_MIC_BAR:
 		#endif
-		case MENU_ABR_ON_TX_RX:
 		case MENU_BCL:
 		case MENU_BEEP:
 		case MENU_AUTOLK:
@@ -601,7 +599,6 @@ void MENU_AcceptSetting(void)
 				break;
 		#endif
 
-		#ifdef ENABLE_COMPANDER
 		case MENU_COMPAND:
 			gTxVfo->Compander = gSubMenuSelection;
 			SETTINGS_UpdateChannel(gTxVfo->CHANNEL_SAVE, gTxVfo, true);
@@ -609,7 +606,6 @@ void MENU_AcceptSetting(void)
 			gFlagResetVfos    = true;
 //			gRequestSaveChannel = 1;
 			return;
-		#endif
 
 		case MENU_1_CALL:
 			gEeprom.CHAN_1_CALL = gSubMenuSelection;
@@ -998,11 +994,9 @@ void MENU_ShowCurrentSetting(void)
 				break;
 		#endif
 
-		#ifdef ENABLE_COMPANDER
 		case MENU_COMPAND:
 			gSubMenuSelection = gTxVfo->Compander;
 			return;
-		#endif
 
 		case MENU_1_CALL:
 			gSubMenuSelection = gEeprom.CHAN_1_CALL;

bitmaps.c

@@ -416,7 +416,6 @@ const uint8_t BITMAP_ScanList2[6] =
 	0b01000010
 };
 
-#ifdef ENABLE_COMPANDER
 const uint8_t BITMAP_compand[6] =
 {
 	0b00000000,
@@ -426,4 +425,3 @@ const uint8_t BITMAP_ScanList2[6] =
 	0b01000010,
 	0b00100100
 };
-#endif

bitmaps.h

@@ -65,9 +65,7 @@ extern const uint8_t BITMAP_VFO_NotDefault[8];
 extern const uint8_t BITMAP_ScanList1[6];
 extern const uint8_t BITMAP_ScanList2[6];
 
-#ifdef ENABLE_COMPANDER
 extern const uint8_t BITMAP_compand[6];
-#endif
 
 #endif
 

board.c

@@ -714,7 +714,7 @@ void BOARD_EEPROM_Init(void)
 	#ifdef ENABLE_AM_FIX
 		gSetting_AM_fix        = (Data[7] & (1u << 5)) ? true : false;
 	#endif
-	gSetting_backlight_on_tx_rx = (Data[7] & (1u << 6)) ? true : false;
+	gSetting_backlight_on_tx_rx = (Data[7] >> 6) & 3u;
 
 	if (!gEeprom.VFO_OPEN)
 	{

functions.c

@@ -230,7 +230,7 @@ void FUNCTION_Select(FUNCTION_Type_t Function)
 			else
 				BK4819_DisableScramble();
 
-			if (gSetting_backlight_on_tx_rx)
+			if (gSetting_backlight_on_tx_rx == 1 || gSetting_backlight_on_tx_rx == 3)
 				BACKLIGHT_TurnOn();
 
 			break;

misc.c

@@ -87,7 +87,7 @@ bool              gSetting_TX_EN;
 uint8_t           gSetting_F_LOCK;
 bool              gSetting_ScrambleEnable;
 
-bool              gSetting_backlight_on_tx_rx;
+uint8_t           gSetting_backlight_on_tx_rx;
 
 #ifdef ENABLE_AM_FIX
 	bool          gSetting_AM_fix;

misc.h

@@ -156,7 +156,7 @@ extern bool                  gSetting_TX_EN;
 extern uint8_t               gSetting_F_LOCK;
 extern bool                  gSetting_ScrambleEnable;
 
-extern bool                  gSetting_backlight_on_tx_rx;
+extern uint8_t               gSetting_backlight_on_tx_rx;
 
 #ifdef ENABLE_AM_FIX
 	extern bool              gSetting_AM_fix;

radio.c

@@ -130,9 +130,7 @@ void RADIO_InitInfo(VFO_Info_t *pInfo, const uint8_t ChannelSave, const uint32_t
 	pInfo->freq_config_TX.Frequency = Frequency;
 	pInfo->pRX                      = &pInfo->freq_config_RX;
 	pInfo->pTX                      = &pInfo->freq_config_TX;
-	#ifdef ENABLE_COMPANDER
 	pInfo->Compander                = 0;  // off
-	#endif
 
 	if (ChannelSave == (FREQ_CHANNEL_FIRST + BAND2_108MHz))
 		pInfo->AM_mode = 1;
@@ -420,9 +418,7 @@ void RADIO_ConfigureChannel(const unsigned int VFO, const unsigned int configure
 		gEeprom.VfoInfo[VFO].freq_config_TX.CodeType = CODE_TYPE_OFF;
 	}
 
-	#ifdef ENABLE_COMPANDER
 	gEeprom.VfoInfo[VFO].Compander = (Attributes & MR_CH_COMPAND) >> 4;
-	#endif
 
 	RADIO_ConfigureSquelchAndOutputPower(pRadio);
 }
@@ -720,10 +716,8 @@ void RADIO_SetupRegisters(bool bSwitchToFunction0)
 	#endif
 		BK4819_DisableVox();
 
-	#ifdef ENABLE_COMPANDER
 	// RX expander
 	BK4819_SetCompander((gRxVfo->AM_mode == 0 && gRxVfo->Compander >= 2) ? gRxVfo->Compander : 0);
-	#endif
 
 	#if 0
 		if (!gRxVfo->DTMF_DECODING_ENABLE && !gSetting_KILLED)
@@ -828,10 +822,8 @@ void RADIO_SetTxParameters(void)
 
 	BK4819_SetFrequency(gCurrentVfo->pTX->Frequency);
 
-	#ifdef ENABLE_COMPANDER
 	// TX compressor
 	BK4819_SetCompander((gRxVfo->AM_mode == 0 && (gRxVfo->Compander == 1 || gRxVfo->Compander >= 3)) ? gRxVfo->Compander : 0);
-	#endif
 
 	BK4819_PrepareTransmit();
 

radio.h

@@ -25,9 +25,7 @@
 
 enum {
 	MR_CH_BAND_MASK   = 0x0F << 0,
-	#ifdef ENABLE_COMPANDER
 	MR_CH_COMPAND     =   3u << 4,  // new
-	#endif
 	MR_CH_SCANLIST2   =   1u << 6,
 	MR_CH_SCANLIST1   =   1u << 7
 };
@@ -111,9 +109,7 @@ typedef struct VFO_Info_t
 
 	uint8_t        AM_mode;
 
-	#ifdef ENABLE_COMPANDER
 	uint8_t        Compander;
-	#endif
 
 	char           Name[16];
 } VFO_Info_t;

settings.c

@@ -179,7 +179,7 @@ void SETTINGS_SaveSettings(void)
 	#ifdef ENABLE_AM_FIX
 		if (!gSetting_AM_fix)            State[7] &= ~(1u << 5);
 	#endif
-	if (!gSetting_backlight_on_tx_rx)    State[7] &= ~(1u << 6);
+	State[7] = (State[7] & ~(3u << 6)) | ((gSetting_backlight_on_tx_rx & 3u) << 6);
 	 
 	EEPROM_WriteBuffer(0x0F40, State);
 }
@@ -260,20 +260,15 @@ void SETTINGS_UpdateChannel(uint8_t Channel, const VFO_Info_t *pVFO, bool keep)
 	{
 		uint8_t  State[8];
 		uint8_t  Attributes = 0xFF;        // default attributes
-		#ifdef ENABLE_COMPANDER
-			Attributes &= ~MR_CH_COMPAND;  // default to '0' = compander disabled
-		#endif
 		uint16_t Offset = 0x0D60 + (Channel & ~7u);
 		
+		Attributes &= ~MR_CH_COMPAND;  // default to '0' = compander disabled
+
 		EEPROM_ReadBuffer(Offset, State, sizeof(State));
 
 		if (keep)
 		{
-			#ifdef ENABLE_COMPANDER
 			Attributes = (pVFO->SCANLIST1_PARTICIPATION << 7) | (pVFO->SCANLIST2_PARTICIPATION << 6) | (pVFO->Compander << 4) | (pVFO->Band << 0);
-			#else
-				Attributes = (pVFO->SCANLIST1_PARTICIPATION << 7) | (pVFO->SCANLIST2_PARTICIPATION << 6) | (pVFO->Band << 0);
-			#endif
 			if (State[Channel & 7u] == Attributes)
 				return; // no change in the attributes
 		}

ui/main.c

@@ -543,10 +543,12 @@ void UI_DisplayMain(void)
 				if (attributes & MR_CH_SCANLIST2)
 					memmove(p_line0 + 120, BITMAP_ScanList2, sizeof(BITMAP_ScanList2));
 				#ifndef ENABLE_BIG_FREQ
-					#ifdef ENABLE_COMPANDER
 					if ((attributes & MR_CH_COMPAND) > 0)
 						memmove(p_line0 + 120 + LCD_WIDTH, BITMAP_compand, sizeof(BITMAP_compand));
-					#endif
+				#else
+					
+					// TODO:  // find somewhere else to put the symbol
+				
 				#endif
 
 				switch (gEeprom.CHANNEL_DISPLAY_MODE)
@@ -613,7 +615,6 @@ void UI_DisplayMain(void)
 					UI_PrintString(String, 32, 0, line, 8);
 				#endif
 
-				#ifdef ENABLE_COMPANDER
 				// show the channel symbols
 				const uint8_t attributes = gMR_ChannelAttributes[gEeprom.ScreenChannel[vfo_num]];
 				if ((attributes & MR_CH_COMPAND) > 0)
@@ -622,7 +623,6 @@ void UI_DisplayMain(void)
 					#else
 						memmove(p_line0 + 120 + LCD_WIDTH, BITMAP_compand, sizeof(BITMAP_compand));
 					#endif
-				#endif
 			}
 		}
 

ui/menu.c

@@ -82,9 +82,7 @@ const t_menu_item MenuList[] =
 #ifdef ENABLE_AUDIO_BAR
 	{"MICBAR", VOICE_ID_INVALID,                       MENU_MIC_BAR       },
 #endif
-#ifdef ENABLE_COMPANDER
 	{"COMPND", VOICE_ID_INVALID,                       MENU_COMPAND       },
-#endif
 	{"1 CALL", VOICE_ID_INVALID,                       MENU_1_CALL        },
 	{"SLIST",  VOICE_ID_INVALID,                       MENU_S_LIST        },
 	{"SLIST1", VOICE_ID_INVALID,                       MENU_SLIST1        },
@@ -293,15 +291,13 @@ const char gSubMenu_BACKLIGHT[8][7] =
 	"ON"
 };
 
-#ifdef ENABLE_COMPANDER
+const char gSubMenu_RX_TX[4][6] =
-	const char gSubMenu_Compand[4][6] =
 {
 	"OFF",
 	"TX",
 	"RX",
 	"TX/RX"
 };
-#endif
 
 #ifdef ENABLE_AM_FIX_TEST1
 	const char gSubMenu_AM_fix_test1[4][8] =
@@ -588,16 +584,14 @@ void UI_DisplayMenu(void)
 			strcpy(String, (gSubMenuSelection == 0) ? "OFF" : "AUTO");
 			break;
 
-		#ifdef ENABLE_COMPANDER
 		case MENU_COMPAND:
-				strcpy(String, gSubMenu_Compand[gSubMenuSelection]);
+		case MENU_ABR_ON_TX_RX:
+			strcpy(String, gSubMenu_RX_TX[gSubMenuSelection]);
 			break;
-		#endif
 
 		#ifdef ENABLE_AM_FIX
 			case MENU_AM_FIX:
 		#endif
-		case MENU_ABR_ON_TX_RX:
 		case MENU_BCL:
 		case MENU_BEEP:
 		case MENU_S_ADD1:

ui/menu.h

@@ -69,9 +69,7 @@ enum
 #ifdef ENABLE_AUDIO_BAR
 	MENU_MIC_BAR,
 #endif
-#ifdef ENABLE_COMPANDER
 	MENU_COMPAND,
-#endif
 	MENU_1_CALL,
 	MENU_S_LIST,
 	MENU_SLIST1,
@@ -147,9 +145,7 @@ extern const char        gSubMenu_ROGER[3][9];
 extern const char        gSubMenu_RESET[2][4];
 extern const char        gSubMenu_F_LOCK[6][4];
 extern const char        gSubMenu_BACKLIGHT[8][7];
-#ifdef ENABLE_COMPANDER
+extern const char        gSubMenu_RX_TX[4][6];
-	extern const char    gSubMenu_Compand[4][6];
-#endif
 #ifdef ENABLE_AM_FIX_TEST1
 	extern const char    gSubMenu_AM_fix_test1[4][8];
 #endif