diff --git a/F_CALI_menu.png b/F_CALI_menu.png deleted file mode 100644 index 56f4886..0000000 Binary files a/F_CALI_menu.png and /dev/null differ diff --git a/README.md b/README.md index eed3aae..89af051 100644 --- a/README.md +++ b/README.md @@ -12,36 +12,36 @@ You can customize the firmware by enabling/disabling various compile options. You'll find the options at the top of "makefile" ('0' = disable, '1' = enable) .. ``` -ENABLE_SWD := 0 enable only if you're using the CPU's SWD port (debugging/programming) +ENABLE_SWD := 0 only needed if using CPU's SWD port (debugging/programming) ENABLE_OVERLAY := 1 cpu FLASH stuff -ENABLE_UART := 1 without this you can't configure the radio with your PC -ENABLE_AIRCOPY := 0 easier to just type frequency in -ENABLE_FMRADIO := 0 FM band 2 RX +ENABLE_UART := 1 without this you can't configure the radio via PC +ENABLE_AIRCOPY := 0 easier to just enter frequency +ENABLE_FMRADIO := 0 WBFM VHF band 2 RX ENABLE_NOAA := 0 Everything NOAA ENABLE_VOICE := 0 want to hear voices ? ENABLE_ALARM := 0 TX alarms -ENABLE_BIG_FREQ := 0 big font for the frequencies -ENABLE_KEEP_MEM_NAME := 1 maintain the channel name when (re)saving a memory channel -ENABLE_CHAN_NAME_FREQ := 1 show the channel frequency below the channel name/number -ENABLE_WIDE_RX := 1 full 18MHz to 1300MHz for RX (though frontend is not tuned for full range) +ENABLE_BIG_FREQ := 0 big font frequencies +ENABLE_KEEP_MEM_NAME := 1 maintain channel name when (re)saving memory channel +ENABLE_CHAN_NAME_FREQ := 1 show channel frequency below channel name/number +ENABLE_WIDE_RX := 1 full 18MHz to 1300MHz RX (though frontend not tuned over full range) ENABLE_TX_WHEN_AM := 0 allow TX (always FM) when RX is set to AM -ENABLE_CTCSS_TAIL_PHASE_SHIFT := 1 use standard CTCSS tail phase shift rather than QS's own 55Hz tone method -ENABLE_MAIN_KEY_HOLD := 1 keys 0-9 can be held down to bypass having to first press the F-key +ENABLE_CTCSS_TAIL_PHASE_SHIFT := 1 standard CTCSS tail phase shift rather than QS's own 55Hz tone method +ENABLE_MAIN_KEY_HOLD := 1 initial F-key press not needed, instead hold down keys 0-9 ENABLE_BOOT_BEEPS := 1 give user audio feedback on the volume knob position at boot-up -ENABLE_COMPANDER := 1 compander option - not yet fully operational +ENABLE_COMPANDER := 1 compander option - setting not yet saved #ENABLE_SINGLE_VFO_CHAN := 1 not yet implemented - single VFO on display when possible #ENABLE_BAND_SCOPE := 1 not yet implemented - spectrum/pan-adapter ``` # Some other changes made -* Various QS firmware bugs fixed +* Various Quansheng firmware bugs fixed * Added new bugs * Finer RSSI bar steps * Mic menu includes max gain possible * AM RX everywhere (not that AM really works) * Better backlight times (inc always on) -* Nicer/cleaner big numeric font than original QS big numeric font +* Nicer/cleaner big numeric font than original Quansheng big numeric font * Various menu re-wordings (trying to reduce 'WTH does that mean ?') * Extra menu items (including hidden frequency calibration) * plus others @@ -104,9 +104,10 @@ You may obtain a copy of the License at See the License for the specific language governing permissions and limitations under the License. -# Example changes +# Example changes/updates

- - + + +

diff --git a/chan_freq_option.png b/chan_freq_option.png deleted file mode 100644 index d3cf527..0000000 Binary files a/chan_freq_option.png and /dev/null differ diff --git a/image1.png b/image1.png new file mode 100644 index 0000000..018ca61 Binary files /dev/null and b/image1.png differ diff --git a/image2.png b/image2.png new file mode 100644 index 0000000..44ebacc Binary files /dev/null and b/image2.png differ diff --git a/image3.png b/image3.png new file mode 100644 index 0000000..42d93ee Binary files /dev/null and b/image3.png differ