mirrors/uv-k5-firmware-custom
0
Fork 0
mirror of https://github.com/OneOfEleven/uv-k5-firmware-custom.git synced 2025-06-19 22:58:04 +03:00
Code Issues Releases Activity

Tidy ups and makefile update

Browse Source
This commit is contained in:
OneOfEleven
2023-09-14 09:56:30 +01:00
parent fe212140dd
commit 54711a5971
53 changed files with 1092 additions and 687 deletions
Download Patch File Download Diff File Expand all files Collapse all files

29
README.md
View File

@ -9,21 +9,24 @@ Am amazing achievement if you ask me !
# User customization
This version you can customize at compile time by making various changes to the makefile.
You can edit those changes by (currently) editing the MakeFile, look for these lines ..
You can edit those changes by (currently) editing the MakeFile, look for these lines near the top of the file ..
* CFLAGS += -DDISABLE_BIG_FREQ .. show frequencies using smaller font
* CFLAGS += -DDISABLE_NOAA .. remove NOAA channels option from the firmware
* CFLAGS += -DDISABLE_VOICE .. remove spoken VOICES option from the firmware
* CFLAGS += -DDISABLE_AIRCOPY .. remove AIRCOPY option
* CFLAGS += -DDISABLE_ALARM .. remove the ALARM transmit option from the firmware
* CFLAGS += -DKEEP_MEM_NAME .. keep the memory channels name when re-saving a channel
* CFLAGS += -DCHAN_NAME_FREQ .. show the channel frequency (as well as channel number/name)
* CFLAGS += -DRX_ANY_FREQ .. allow RX on any frequency from 18MHz to 1300MHz
* #CFLAGS += -DENABLE_TX_WHEN_AM .. enable TX when radio set to AM (radio does NOT do AM, the adverts are false)
* #CFLAGS += -DSINGLE_VFO_CHAN .. (not yet implemented) show a single VFO/CHANNEL if dual-watch/cross-band are disabled
* #CFLAGS += -DBAND_SCOPE .. (not yet implemented) add a band scope/spectrum/panadapter option
* ENABLE_AIRCOPY := 0 aircopy
* ENABLE_FMRADIO := 0 FM band 2 radio
* ENABLE_OVERLAY := 1
* ENABLE_UART := 1 serial port
* ENABLE_NOAA := 0 NOAA channels
* ENABLE_VOICE := 0 voices
* ENABLE_ALARM := 0 TX alarms
* ENABLE_BIG_FREQ := 0 big font for the frequencies
* ENABLE_KEEP_MEM_NAME := 1 maintain the channels name when saving over it
* ENABLE_CHAN_NAME_FREQ := 1 show the channels frequency below the channels name/number
* ENABLE_WIDE_RX := 1 enable the RX in the full 18MHz to 1300MHz range
* ENABLE_TX_WHEN_AM := 0 allow TX when RX set to AM
* #ENABLE_SINGLE_VFO_CHAN := 1 not yet implemented
* #ENABLE_BAND_SCOPE := 1 not yet implemented
To enable the custom option just uncomment the line by removing the starting '#'.
To enable the custom option, set the above option to '1'
# Other changes made