0
mirror of https://github.com/OneOfEleven/uv-k5-firmware-custom.git synced 2025-04-28 14:21:25 +03:00

fix 1sec audio tick when RX monitor enable and RX CTCSS set

This commit is contained in:
OneOfEleven 2023-12-11 18:28:36 +00:00
parent 0dd0e79298
commit c9ee299b8f
5 changed files with 19 additions and 11 deletions

View File

@ -58,7 +58,7 @@ ENABLE_SHOW_FREQ_IN_CHAN := 1
# small bold 580 B
ENABLE_SMALL_BOLD := 1
# smallest font 2 kB
ENABLE_SMALLEST_FONT := 0
#ENABLE_SMALLEST_FONT := 0
# trim trailing 44 B
ENABLE_TRIM_TRAILING_ZEROS := 0
ENABLE_WIDE_RX := 1

View File

@ -194,6 +194,8 @@ static void APP_process_new_receive(void)
if (!g_squelch_open)
BK4819_set_AFC(0);
else
BK4819_set_GPIO_pin(BK4819_GPIO6_PIN2_GREEN, true); // green LED on
if (!g_squelch_open && !g_monitor_enabled)
{ // squelch is closed
@ -335,8 +337,12 @@ static void APP_process_rx(void)
goto Skip;
}
if (g_found_ctcss_tick_10ms == 0)
if (g_found_ctcss_tick_10ms == 0 && !g_monitor_enabled)
{
#if defined(ENABLE_UART) && defined(ENABLE_UART_DEBUG)
// UART_printf("rx code check\n");
#endif
if (g_current_code_type == CODE_TYPE_CONTINUOUS_TONE && g_found_ctcss)
{
g_found_ctcss = false;

View File

@ -1352,9 +1352,8 @@ void BK4819_config_sub_audible(void)
// #ifdef ENABLE_CTCSS_TAIL_PHASE_SHIFT
// BK4819_gen_tail(2); // 180 deg
// #else
// BK4819_gen_tail(4);
BK4819_write_reg(0x52, (0u << 15) | (0u << 13) | (0u << 12) | (10u << 6) | (15u << 0)); // 0x028F); // 0 00 0 001010 001111
// #endif
BK4819_gen_tail(5);
// #endif
}
// freq_10Hz is CTCSS Hz * 10
@ -1402,7 +1401,7 @@ void BK4819_gen_tail(const unsigned int tail)
// 2 = CTCSS0 180° phase shift
// 3 = CTCSS0 240° phase shift
//
// <12> CTCSS Detection Threshold Mode
// <12> 0 CTCSS Detection Threshold Mode
// 1 = ~0.1%
// 0 = 0.1Hz
//
@ -1413,14 +1412,14 @@ void BK4819_gen_tail(const unsigned int tail)
uint16_t tail_phase_shift = 1;
uint16_t ctcss_tail_mode_selection = 0;
uint16_t ctcss_detect_threshold_mode = 0;
#if 0
#if 1
// original QS setting
uint16_t ctcss_found_threshold = 10;
uint16_t ctcss_lost_threshold = 15;
uint16_t ctcss_found_threshold = 10;
uint16_t ctcss_lost_threshold = 15;
#else
// increase it to help reduce false detections when doing CTCSS/CDCSS searching
uint16_t ctcss_found_threshold = 15;
uint16_t ctcss_lost_threshold = 23;
uint16_t ctcss_found_threshold = 13;
uint16_t ctcss_lost_threshold = 18;
#endif
switch (tail)
@ -1443,6 +1442,9 @@ void BK4819_gen_tail(const unsigned int tail)
ctcss_found_threshold = 17;
ctcss_lost_threshold = 47;
break;
case 5:
tail_phase_shift = 0;
break;
}
BK4819_write_reg(0x52,

Binary file not shown.

Binary file not shown.