diff --git a/Makefile b/Makefile
index 3ddb0ae..3e56543 100644
--- a/Makefile
+++ b/Makefile
@@ -8,19 +8,23 @@ ENABLE_CLANG                     := 0
 ENABLE_SWD                       := 0
 ENABLE_OVERLAY                   := 0
 ENABLE_LTO                       := 1
+#
 # UART Programming 2.9 kB
 ENABLE_UART                      := 1
 ENABLE_UART_DEBUG                := 0
+#
 # AirCopy 2.5 kB
 ENABLE_AIRCOPY                   := 0
 ENABLE_AIRCOPY_REMEMBER_FREQ     := 1
 ENABLE_AIRCOPY_RX_REBOOT         := 0
+#
 # FM Radio 4.2 kB
 ENABLE_FMRADIO_64_76             := 0
 ENABLE_FMRADIO_76_90             := 0
 ENABLE_FMRADIO_76_108            := 0
 ENABLE_FMRADIO_875_108           := 1
 ENABLE_FMRADIO_64_108            := 0
+#
 # NOAA 1.2 kB
 ENABLE_NOAA                      := 0
 # Voice 1.7 kB
@@ -31,7 +35,8 @@ ENABLE_VOX                       := 1
 ENABLE_VOX_MORE_SENSITIVE        := 1
 # Tx Alarm 600 B
 ENABLE_ALARM                     := 0
-ENABLE_TX_TONE_HZ                   := 1750
+ENABLE_TX_TONE_HZ                := 1750
+#
 # MDC1200 2.8 kB
 ENABLE_MDC1200                   := 0
 ENABLE_MDC1200_SHOW_OP_ARG       := 1
@@ -40,6 +45,7 @@ ENABLE_MDC1200_SIDE_BEEP         := 1
 ENABLE_PWRON_PASSWORD            := 0
 ENABLE_RESET_AES_KEY             := 0
 ENABLE_BIG_FREQ                  := 0
+#
 # DTMF_CALLING 2.8 kB
 ENABLE_DTMF_CALLING              := 0
 ENABLE_DTMF_LIVE_DECODER         := 0
@@ -47,6 +53,7 @@ ENABLE_DTMF_TIMING_SETTINGS      := 0
 ENABLE_DTMF_CALL_FLASH_LIGHT     := 0
 # Kill and Revive 400 B
 ENABLE_DTMF_KILL_REVIVE          := 0
+#
 ENABLE_SHOW_FREQ_IN_CHAN         := 1
 # small bold 580 B
 ENABLE_SMALL_BOLD                := 1
@@ -56,6 +63,7 @@ ENABLE_SMALLEST_FONT             := 0
 ENABLE_TRIM_TRAILING_ZEROS       := 0
 ENABLE_WIDE_RX                   := 1
 ENABLE_TX_WHEN_AM                := 0
+#
 # Frequency calibration 188 B
 ENABLE_F_CAL_MENU                := 0
 # FM DEV CAL 250 B
diff --git a/firmware.bin b/firmware.bin
index 25d8c87..31f6a2d 100644
Binary files a/firmware.bin and b/firmware.bin differ
diff --git a/firmware.packed.bin b/firmware.packed.bin
index 7c9469d..3b91ba3 100644
Binary files a/firmware.packed.bin and b/firmware.packed.bin differ
diff --git a/ui/main.c b/ui/main.c
index 8852755..46d1d3c 100644
--- a/ui/main.c
+++ b/ui/main.c
@@ -972,8 +972,8 @@ const char *state_list[] = {"", "BUSY", "BAT LOW", "TX DISABLE", "TIMEOUT", "ALA
 				UI_PrintStringSmall("R", x, 0, y);
 			x += 7 * 1;
 
-			if (tx_allowed && g_vfo_info[vfo_num].freq_config_rx.frequency != g_vfo_info[vfo_num].freq_config_tx.frequency)
-			{	// offset symbol
+			//if (g_vfo_info[vfo_num].freq_config_rx.frequency != g_vfo_info[vfo_num].freq_config_tx.frequency)
+			{	// offset direction symbol
 				const char *dir_list[] = {"", "+", "-"};
 				const unsigned int i = g_vfo_info[vfo_num].channel.tx_offset_dir;
 				UI_PrintStringSmall(dir_list[i], x, 0, y);
@@ -981,7 +981,7 @@ const char *state_list[] = {"", "BUSY", "BAT LOW", "TX DISABLE", "TIMEOUT", "ALA
 			x += 7 * 1;
 
 			if (g_vfo_info[vfo_num].channel.tx_offset_dir != TX_OFFSET_FREQ_DIR_OFF)
-			{	// TX/RX offset
+			{	// TX/RX offset frequency
 				const uint32_t ofs = g_vfo_info[vfo_num].channel.tx_offset;
 				sprintf(str, "%u.%05u", ofs / 100000, ofs % 100000);
 				NUMBER_trim_trailing_zeros(str);
@@ -995,7 +995,6 @@ const char *state_list[] = {"", "BUSY", "BAT LOW", "TX DISABLE", "TIMEOUT", "ALA
 				if (g_vfo_info[vfo_num].channel.dtmf_decoding_enable)
 					strcpy(str, "DTMF");
 				UI_PrintStringSmall(str, LCD_WIDTH - (7 * 4), 0, y);
-				//x += 7 * 5;
 			#endif
 		}