mirrors/uv-k5-firmware-custom
0
Fork 0
mirror of https://github.com/OneOfEleven/uv-k5-firmware-custom.git synced 2025-06-19 22:58:04 +03:00
Code Issues Releases Activity

Added compile option for the faster newer bigger larger manual up/dn frequency smootching

Browse Source
This commit is contained in:
OneOfEleven
2023-10-16 10:47:43 +01:00
parent 916be495d4
commit f69a997ac1
6 changed files with 151 additions and 119 deletions
Download Patch File Download Diff File Expand all files Collapse all files

87
README.md
View File

@ -34,49 +34,50 @@ us to remove certain firmware features in order to make room in the flash for ot
You'll find the options at the top of "Makefile" ('0' = disable, '1' = enable) ..
```
ENABLE_CLANG := 0 **experimental, builds with clang instead of gcc (LTO will be disabled if you enable this)
ENABLE_SWD := 0 only needed if using CPU's SWD port (debugging/programming)
ENABLE_OVERLAY := 0 cpu FLASH stuff, not needed
ENABLE_LTO := 0 **experimental, reduces size of compiled firmware but might break EEPROM reads (OVERLAY will be disabled if you enable this)
ENABLE_UART := 1 without this you can't configure radio via PC
ENABLE_UART_DEBUG := 0 just for code debugging, it sends debug info along the USB serial connection (programming lead)
ENABLE_AIRCOPY := 1 clone radio-to-radio via RF
ENABLE_AIRCOPY_FREQ := 1 remember what you use for the aircopy frequency
ENABLE_AIRCOPY_RX_REBOOT := 0 auto reboot on an aircopy successful RX completion
ENABLE_FMRADIO := 1 WBFM VHF broadcast band receiver
ENABLE_NOAA := 1 everything NOAA (only of any use in the USA)
ENABLE_VOICE := 0 want to hear voices ?
ENABLE_MUTE_RADIO_FOR_VOICE := 1 mute the radios audio when a voice is playing
ENABLE_VOX := 1 voice operated transmission
ENABLE_LOWER_LOW_MID_TX := 1 reduce the low and mid TX power levels (high remains unchanged)
ENABLE_ALARM := 1 TX alarms
ENABLE_1750HZ := 1 side key 1750Hz TX tone (older style repeater access)
ENABLE_PWRON_PASSWORD := 0 '1' = allow power-on password
ENABLE_RESET_AES_KEY := 1 '1' = reset/clear the AES key stored in the eeprom (only if it's set)
ENABLE_BIG_FREQ := 0 big font frequencies (like original QS firmware)
ENABLE_SMALL_BOLD := 1 bold channel name/no. (when name + freq channel display mode)
ENABLE_KEEP_MEM_NAME := 1 maintain channel name when (re)saving memory channel
ENABLE_WIDE_RX := 1 full 18MHz to 1300MHz RX (though front-end/PA not designed for full range)
ENABLE_1250HZ_STEP := 1 enable smaller 1.25kHz frequency steps
ENABLE_TX_WHEN_AM := 0 allow TX (always FM) when RX is set to AM
ENABLE_F_CAL_MENU := 0 enable/disable the radios hidden frequency calibration menu
ENABLE_TX_UNLOCK := 0 '1' = allow TX everywhere EXCEPT airband (108~136) .. TX harmonic content will cause interference to other services, do so entirely at your own risk !
ENABLE_CTCSS_TAIL_PHASE_SHIFT := 1 standard CTCSS tail phase shift rather than QS's own 55Hz tone method
ENABLE_BOOT_BEEPS := 0 gives user audio feedback on volume knob position at boot-up
ENABLE_SHOW_CHARGE_LEVEL := 0 show the charge level when the radio is on charge
ENABLE_REVERSE_BAT_SYMBOL := 1 mirror the battery symbol on the status bar (+ pole on the right)
ENABLE_FREQ_SEARCH_TIMEOUT := 1 timeout if FREQ not found when using F+4 search function
ENABLE_CODE_SEARCH_TIMEOUT := 0 timeout if CTCSS/CDCSS not found when using F+* search function
ENABLE_AM_FIX := 1 dynamically adjust the front end gains when in AM mode to helo prevent AM demodulator saturation, ignore the on-screen RSSI level (for now)
ENABLE_AM_FIX_SHOW_DATA := 1 show debug data for the AM fix (still tweaking it)
ENABLE_SQUELCH_MORE_SENSITIVE := 1 make squelch levels a little bit more sensitive - I plan to let user adjust the values themselves
ENABLE_FASTER_CHANNEL_SCAN := 1 increases the channel scan speed, but the squelch is also made more twitchy
ENABLE_RSSI_BAR := 1 enable a dBm/Sn RSSI bar graph level inplace of the little antenna symbols
ENABLE_SHOW_TX_TIMEOUT := 0 show the remainng TX time
ENABLE_AUDIO_BAR := 1 experimental, display an audo bar level when TX'ing, includes remaining TX time (in seconds)
ENABLE_COPY_CHAN_TO_VFO := 1 copy current channel into the other VFO. Long press Menu key ('M')
#ENABLE_BAND_SCOPE := 0 not yet implemented - spectrum/pan-adapter
#ENABLE_SINGLE_VFO_CHAN := 0 not yet implemented - single VFO on display when possible
ENABLE_CLANG := 0 **experimental, builds with clang instead of gcc (LTO will be disabled if you enable this)
ENABLE_SWD := 0 only needed if using CPU's SWD port (debugging/programming)
ENABLE_OVERLAY := 0 cpu FLASH stuff, not needed
ENABLE_LTO := 0 **experimental, reduces size of compiled firmware but might break EEPROM reads (OVERLAY will be disabled if you enable this)
ENABLE_UART := 1 without this you can't configure radio via PC
ENABLE_UART_DEBUG := 0 just for code debugging, it sends debug info along the USB serial connection (programming lead)
ENABLE_AIRCOPY := 1 clone radio-to-radio via RF
ENABLE_AIRCOPY_FREQ := 1 remember what you use for the aircopy frequency
ENABLE_AIRCOPY_RX_REBOOT := 0 auto reboot on an aircopy successful RX completion
ENABLE_FMRADIO := 1 WBFM VHF broadcast band receiver
ENABLE_NOAA := 1 everything NOAA (only of any use in the USA)
ENABLE_VOICE := 0 want to hear voices ?
ENABLE_MUTE_RADIO_FOR_VOICE := 1 mute the radios audio when a voice is playing
ENABLE_VOX := 1 voice operated transmission
ENABLE_LOWER_LOW_MID_TX := 1 reduce the low and mid TX power levels (high remains unchanged)
ENABLE_ALARM := 1 TX alarms
ENABLE_1750HZ := 1 side key 1750Hz TX tone (older style repeater access)
ENABLE_PWRON_PASSWORD := 0 '1' = allow power-on password
ENABLE_RESET_AES_KEY := 1 '1' = reset/clear the AES key stored in the eeprom (only if it's set)
ENABLE_BIG_FREQ := 0 big font frequencies (like original QS firmware)
ENABLE_SMALL_BOLD := 1 bold channel name/no. (when name + freq channel display mode)
ENABLE_KEEP_MEM_NAME := 1 maintain channel name when (re)saving memory channel
ENABLE_WIDE_RX := 1 full 18MHz to 1300MHz RX (though front-end/PA not designed for full range)
ENABLE_1250HZ_STEP := 1 enable smaller 1.25kHz frequency steps
ENABLE_TX_WHEN_AM := 0 allow TX (always FM) when RX is set to AM
ENABLE_F_CAL_MENU := 0 enable/disable the radios hidden frequency calibration menu
ENABLE_TX_UNLOCK := 0 '1' = allow TX everywhere EXCEPT airband (108~136) .. TX harmonic content will cause interference to other services, do so entirely at your own risk !
ENABLE_CTCSS_TAIL_PHASE_SHIFT := 1 standard CTCSS tail phase shift rather than QS's own 55Hz tone method
ENABLE_BOOT_BEEPS := 0 gives user audio feedback on volume knob position at boot-up
ENABLE_SHOW_CHARGE_LEVEL := 0 show the charge level when the radio is on charge
ENABLE_REVERSE_BAT_SYMBOL := 1 mirror the battery symbol on the status bar (+ pole on the right)
ENABLE_FREQ_SEARCH_TIMEOUT := 1 timeout if FREQ not found when using F+4 search function
ENABLE_CODE_SEARCH_TIMEOUT := 0 timeout if CTCSS/CDCSS not found when using F+* search function
ENABLE_AM_FIX := 1 dynamically adjust the front end gains when in AM mode to helo prevent AM demodulator saturation, ignore the on-screen RSSI level (for now)
ENABLE_AM_FIX_SHOW_DATA := 1 show debug data for the AM fix (still tweaking it)
ENABLE_SQUELCH_MORE_SENSITIVE := 1 make squelch levels a little bit more sensitive - I plan to let user adjust the values themselves
ENABLE_SQ_OPEN_WITH_UP_DN_BUTTS := 1 open the squelch when holding down UP or DN buttons when in frequency mode
ENABLE_FASTER_CHANNEL_SCAN := 1 increases the channel scan speed, but the squelch is also made more twitchy
ENABLE_RSSI_BAR := 1 enable a dBm/Sn RSSI bar graph level inplace of the little antenna symbols
ENABLE_SHOW_TX_TIMEOUT := 0 show the remainng TX time
ENABLE_AUDIO_BAR := 1 experimental, display an audo bar level when TX'ing, includes remaining TX time (in seconds)
ENABLE_COPY_CHAN_TO_VFO := 1 copy current channel into the other VFO. Long press Menu key ('M')
#ENABLE_BAND_SCOPE := 0 not yet implemented - spectrum/pan-adapter
#ENABLE_SINGLE_VFO_CHAN := 0 not yet implemented - single VFO on display when possible
```
# New/modified function keys