/* Copyright 2023 Dual Tachyon
 * https://github.com/DualTachyon
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 *     Unless required by applicable law or agreed to in writing, software
 *     distributed under the License is distributed on an "AS IS" BASIS,
 *     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *     See the License for the specific language governing permissions and
 *     limitations under the License.
 */

#include <string.h>
#include <stdlib.h>  // abs()

#include "app/dtmf.h"
#ifdef ENABLE_AM_FIX_SHOW_DATA
	#include "am_fix.h"
#endif
#include "bitmaps.h"
#include "board.h"
#include "driver/bk4819.h"
#include "driver/st7565.h"
#include "external/printf/printf.h"
#include "functions.h"
#include "helper/battery.h"
#include "misc.h"
#include "radio.h"
#include "settings.h"
#include "ui/helper.h"
#include "ui/inputbox.h"
#include "ui/main.h"
#include "ui/ui.h"

bool center_line_is_free = true;

// ***************************************************************************

#ifdef ENABLE_AUDIO_BAR

	unsigned int sqrt16(unsigned int value)
	{	// return square root of 'value'
		unsigned int shift = 16;         // number of bits supplied in 'value' .. 2 ~ 32
		unsigned int bit   = 1u << --shift;
		unsigned int sqrti = 0;
		while (bit)
		{
			const unsigned int temp = ((sqrti << 1) | bit) << shift--;
			if (value >= temp)
			{
				value -= temp;
				sqrti |= bit;
			}
			bit >>= 1;
		}
		return sqrti;
	}

	void UI_DisplayAudioBar(void)
	{
		if (gSetting_mic_bar)
		{
			const unsigned int line      = 3;
			const unsigned int bar_x     = 2;
			const unsigned int bar_width = LCD_WIDTH - 2 - bar_x;
			unsigned int       i;

			#if 1
				// TX audio level

				if (gCurrentFunction != FUNCTION_TRANSMIT)
					return;

				const unsigned int voice_amp  = BK4819_GetVoiceAmplitudeOut();  // 15:0

//				const unsigned int max        = 65535;
//				const unsigned int level      = ((voice_amp * bar_width) + (max / 2)) / max;            // with rounding
//				const unsigned int len        = (level <= bar_width) ? level : bar_width;

				// make non-linear to make more sensitive at low values
				const unsigned int level      = voice_amp * 8;
				const unsigned int sqrt_level = sqrt16((level < 65535) ? level : 65535);
				const unsigned int len        = (sqrt_level <= bar_width) ? sqrt_level : bar_width;

			#else
				// TX/RX AF input level (dB)

				const uint8_t      af_tx_rx   = BK4819_GetAfTxRx();             //  6:0
				const unsigned int max        = 63;
				const unsigned int level      = (((uint16_t)af_tx_rx * bar_width) + (max / 2)) / max;   // with rounding
				const unsigned int len        = (level <= bar_width) ? level : bar_width;

			#endif

			uint8_t *pLine = gFrameBuffer[line];

			memset(pLine, 0, LCD_WIDTH);

			#if 1
				// solid bar
				for (i = 0; i < bar_width; i++)
					pLine[bar_x + i] = (i > len) ? ((i & 1) == 0) ? 0x41 : 0x00 : ((i & 1) == 0) ? 0x7f : 0x3e;
			#else
				// knuled bar
				for (i = 0; i < bar_width; i += 2)
					pLine[bar_x + i] = (i <= len) ? 0x7f : 0x41;
			#endif

			if (gCurrentFunction == FUNCTION_TRANSMIT)
				ST7565_BlitFullScreen();
		}
	}
#endif

#if defined(ENABLE_RSSI_BAR)
	void UI_DisplayRSSIBar(const int16_t rssi, const bool now)
	{
		const int16_t      s0_dBm       = -127;                  // S0 .. base level
//		const int16_t      s0_dBm       = -147;                  // S0 .. base level

		const int16_t      s9_dBm       = s0_dBm + (6 * 9);      // S9 .. 6dB/S-Point
		const int16_t      bar_max_dBm  = s9_dBm + 30;           // S9+30dB
		const int16_t      bar_min_dBm  = s0_dBm;                // S0

		// ************

		const unsigned int txt_width    = 7 * 8;                 // 8 text chars
		const unsigned int bar_x        = 2 + txt_width + 4;     // X coord of bar graph
		const unsigned int bar_width    = LCD_WIDTH - 1 - bar_x;

		const int16_t      rssi_dBm     = (rssi / 2) - 160;
		const int16_t      clamped_dBm  = (rssi_dBm <= bar_min_dBm) ? bar_min_dBm : (rssi_dBm >= bar_max_dBm) ? bar_max_dBm : rssi_dBm;
		const unsigned int bar_range_dB = bar_max_dBm - bar_min_dBm;
		const unsigned int len          = ((clamped_dBm - bar_min_dBm) * bar_width) / bar_range_dB;

		const unsigned int line         = 3;
		uint8_t           *pLine        = gFrameBuffer[line];

		char               s[16];
		unsigned int       i;

		if (gEeprom.KEY_LOCK && gKeypadLocked > 0)
			return;     // display is in use
		if (gCurrentFunction == FUNCTION_TRANSMIT || gScreenToDisplay != DISPLAY_MAIN)
			return;     // display is in use

		if (now)
			memset(pLine, 0, LCD_WIDTH);

		if (rssi_dBm >= (s9_dBm + 6))
		{	// S9+XXdB, 1dB increment
			const char *fmt[] = {"%-4d +%u  ", "%-4d +%u "};
			const unsigned int dB = rssi_dBm - s9_dBm;
			sprintf(s, (dB < 10) ? fmt[0] : fmt[1], rssi_dBm, dB);
		}
		else
		{	// S0 ~ S9, 6dB per S-point
			const unsigned int s_level = (rssi_dBm >= s0_dBm) ? (rssi_dBm - s0_dBm) / 6 : 0;
			sprintf(s, "%-4d S%u ", rssi_dBm, s_level);
		}
		UI_PrintStringSmall(s, 2, 0, line);

		#if 1
			// solid bar
			for (i = 0; i < bar_width; i++)
				pLine[bar_x + i] = (i > len) ? ((i & 1) == 0) ? 0x41 : 0x00 : ((i & 1) == 0) ? 0x7f : 0x3e;
		#else
			// knuled bar
			for (i = 0; i < bar_width; i += 2)
				pLine[bar_x + i] = (i <= len) ? 0x7f : 0x41;
		#endif

		if (now)
			ST7565_BlitFullScreen();
	}
#endif

void UI_UpdateRSSI(const int16_t rssi, const int vfo)
{
	#ifdef ENABLE_RSSI_BAR

		if (!center_line_is_free)
			return;

		const bool rx = (gCurrentFunction == FUNCTION_RECEIVE ||
		                 gCurrentFunction == FUNCTION_MONITOR ||
		                 gCurrentFunction == FUNCTION_INCOMING);

		#if defined(ENABLE_AM_FIX) && defined(ENABLE_AM_FIX_SHOW_DATA)
			if (gEeprom.VfoInfo[gEeprom.RX_CHANNEL].AM_mode && gSetting_AM_fix)
			{	// AM test data is currently being shown
			}
			else
		#endif
			if (rx)
				UI_DisplayRSSIBar(rssi, true);

	#else

//		const int16_t dBm   = (rssi / 2) - 160;
		const uint8_t Line  = (vfo == 0) ? 3 : 7;
		uint8_t      *pLine = gFrameBuffer[Line - 1];

		// TODO: sort out all 8 values from the eeprom

		#if 0
			// dBm     -105  -100  -95   -90      -70   -65   -60   -55
			// RSSI     110   120   130   140      180   190   200   210
			// 0000C0   6E 00 78 00 82 00 8C 00    B4 00 BE 00 C8 00 D2 00
			//
			const unsigned int band = 1;
			const int16_t level0  = gEEPROM_RSSI_CALIB[band][0];
			const int16_t level1  = gEEPROM_RSSI_CALIB[band][1];
			const int16_t level2  = gEEPROM_RSSI_CALIB[band][2];
			const int16_t level3  = gEEPROM_RSSI_CALIB[band][3];
		#else
			const int16_t level0  = (-115 + 160) * 2;   // dB
			const int16_t level1  = ( -89 + 160) * 2;   // dB
			const int16_t level2  = ( -64 + 160) * 2;   // dB
			const int16_t level3  = ( -39 + 160) * 2;   // dB
		#endif
		const int16_t level01 = (level0 + level1) / 2;
		const int16_t level12 = (level1 + level2) / 2;
		const int16_t level23 = (level2 + level3) / 2;

		gVFO_RSSI[vfo] = rssi;

		uint8_t rssi_level = 0;

		if (rssi >= level3)  rssi_level = 7;
		else
		if (rssi >= level23) rssi_level = 6;
		else
		if (rssi >= level2)  rssi_level = 5;
		else
		if (rssi >= level12) rssi_level = 4;
		else
		if (rssi >= level1)  rssi_level = 3;
		else
		if (rssi >= level01) rssi_level = 2;
		else
		if (rssi >= level0)  rssi_level = 1;

		if (gVFO_RSSI_bar_level[vfo] == rssi_level)
			return;

		gVFO_RSSI_bar_level[vfo] = rssi_level;

		// **********************************************************

		if (gEeprom.KEY_LOCK && gKeypadLocked > 0)
			return;    // display is in use

		if (gCurrentFunction == FUNCTION_TRANSMIT || gScreenToDisplay != DISPLAY_MAIN)
			return;    // display is in use

		pLine = gFrameBuffer[Line - 1];

		memset(pLine, 0, 23);

		if (rssi_level > 0)
		{
			//if (rssi_level >= 1)
				memmove(pLine, BITMAP_Antenna, 5);
			if (rssi_level >= 2)
				memmove(pLine +  5, BITMAP_AntennaLevel1, sizeof(BITMAP_AntennaLevel1));
			if (rssi_level >= 3)
				memmove(pLine +  8, BITMAP_AntennaLevel2, sizeof(BITMAP_AntennaLevel2));
			if (rssi_level >= 4)
				memmove(pLine + 11, BITMAP_AntennaLevel3, sizeof(BITMAP_AntennaLevel3));
			if (rssi_level >= 5)
				memmove(pLine + 14, BITMAP_AntennaLevel4, sizeof(BITMAP_AntennaLevel4));
			if (rssi_level >= 6)
				memmove(pLine + 17, BITMAP_AntennaLevel5, sizeof(BITMAP_AntennaLevel5));
			if (rssi_level >= 7)
				memmove(pLine + 20, BITMAP_AntennaLevel6, sizeof(BITMAP_AntennaLevel6));
		}
		else
			pLine = NULL;

		ST7565_DrawLine(0, Line, 23, pLine);
	#endif
}

// ***************************************************************************

void UI_DisplayMain(void)
{
	char         String[16];
	unsigned int vfo_num;

	center_line_is_free = true;

//	#ifdef SINGLE_VFO_CHAN
//		const bool single_vfo = (gEeprom.DUAL_WATCH == DUAL_WATCH_OFF && gEeprom.CROSS_BAND_RX_TX == CROSS_BAND_OFF) ? true : false;
//	#else
		const bool single_vfo = false;
//	#endif

	memset(gFrameBuffer, 0, sizeof(gFrameBuffer));

	if (gEeprom.KEY_LOCK && gKeypadLocked > 0)
	{	// tell user how to unlock the keyboard
		UI_PrintString("Long press #", 0, LCD_WIDTH, 1, 8);
		UI_PrintString("to unlock",    0, LCD_WIDTH, 3, 8);
		ST7565_BlitFullScreen();
		return;
	}

	for (vfo_num = 0; vfo_num < 2; vfo_num++)
	{
		uint8_t  Channel    = gEeprom.TX_CHANNEL;
		bool     bIsSameVfo = !!(Channel == vfo_num);
		uint8_t  Line       = (vfo_num == 0) ? 0 : 4;
		uint8_t *pLine0     = gFrameBuffer[Line + 0];
		uint8_t *pLine1     = gFrameBuffer[Line + 1];

		if (single_vfo)
		{	// we're in single VFO mode - screen is dedicated to just one VFO

			if (!bIsSameVfo)
				continue;  // skip the unused vfo


		}

		if (gEeprom.DUAL_WATCH != DUAL_WATCH_OFF && gRxVfoIsActive)
			Channel = gEeprom.RX_CHANNEL;    // we're currently monitoring the other VFO

		if (Channel != vfo_num)
		{
			if (gDTMF_CallState != DTMF_CALL_STATE_NONE || gDTMF_IsTx || gDTMF_InputMode)
			{	// show DTMF stuff

				char Contact[16];

				if (!gDTMF_InputMode)
				{
					memset(Contact, 0, sizeof(Contact));
					if (gDTMF_CallState == DTMF_CALL_STATE_CALL_OUT)
						strcpy(String, (gDTMF_State == DTMF_STATE_CALL_OUT_RSP) ? "CALL OUT(RSP)" : "CALL OUT");
					else
					if (gDTMF_CallState == DTMF_CALL_STATE_RECEIVED)
						sprintf(String, "CALL FRM:%s", (DTMF_FindContact(gDTMF_Caller, Contact)) ? Contact : gDTMF_Caller);
					else
					if (gDTMF_IsTx)
						strcpy(String, (gDTMF_State == DTMF_STATE_TX_SUCC) ? "DTMF TX(SUCC)" : "DTMF TX");
				}
				else
				{
					sprintf(String, ">%s", gDTMF_InputBox);

					center_line_is_free = false;
				}
				UI_PrintString(String, 2, 0, vfo_num * 3, 8);

				memset(String,  0, sizeof(String));
				if (!gDTMF_InputMode)
				{
					memset(Contact, 0, sizeof(Contact));
					if (gDTMF_CallState == DTMF_CALL_STATE_CALL_OUT)
						sprintf(String, ">%s", (DTMF_FindContact(gDTMF_String, Contact)) ? Contact : gDTMF_String);
					else
					if (gDTMF_CallState == DTMF_CALL_STATE_RECEIVED)
						sprintf(String, ">%s", (DTMF_FindContact(gDTMF_Callee, Contact)) ? Contact : gDTMF_Callee);
					else
					if (gDTMF_IsTx)
						sprintf(String, ">%s", gDTMF_String);
				}
				else
				{
					center_line_is_free = false;
				}
				UI_PrintString(String, 2, 0, 2 + (vfo_num * 3), 8);

				center_line_is_free = false;
				continue;
			}

			// highlight the selected/used VFO with a marker
			if (!single_vfo && bIsSameVfo)
				memmove(pLine0 + 0, BITMAP_VFO_Default, sizeof(BITMAP_VFO_Default));
			else
			if (gEeprom.CROSS_BAND_RX_TX != CROSS_BAND_OFF)
				memmove(pLine0 + 0, BITMAP_VFO_NotDefault, sizeof(BITMAP_VFO_NotDefault));
		}
		else
		if (!single_vfo)
		{	// highlight the selected/used VFO with a marker
			if (bIsSameVfo)
				memmove(pLine0 + 0, BITMAP_VFO_Default, sizeof(BITMAP_VFO_Default));
			else
			//if (gEeprom.CROSS_BAND_RX_TX != CROSS_BAND_OFF)
				memmove(pLine0 + 0, BITMAP_VFO_NotDefault, sizeof(BITMAP_VFO_NotDefault));
		}

		uint32_t duff_beer = 0;

		if (gCurrentFunction == FUNCTION_TRANSMIT)
		{	// transmitting

			#ifdef ENABLE_ALARM
				if (gAlarmState == ALARM_STATE_ALARM)
					duff_beer = 2;
				else
			#endif
			{
				Channel = (gEeprom.CROSS_BAND_RX_TX == CROSS_BAND_OFF) ? gEeprom.RX_CHANNEL : gEeprom.TX_CHANNEL;
				if (Channel == vfo_num)
				{	// show the TX symbol
					duff_beer = 1;
					UI_PrintStringSmall("TX", 14, 0, Line);
				}
			}
		}
		else
		{	// receiving .. show the RX symbol
			duff_beer = 2;
			if ((gCurrentFunction == FUNCTION_RECEIVE || gCurrentFunction == FUNCTION_MONITOR) && gEeprom.RX_CHANNEL == vfo_num)
				UI_PrintStringSmall("RX", 14, 0, Line);
		}

		if (IS_MR_CHANNEL(gEeprom.ScreenChannel[vfo_num]))
		{	// channel mode
			const unsigned int x = 2;
			const bool inputting = (gInputBoxIndex == 0 || gEeprom.TX_CHANNEL != vfo_num) ? false : true;
			if (!inputting)
				NUMBER_ToDigits(gEeprom.ScreenChannel[vfo_num] + 1, String);  // show the memory channel number
			else
				memmove(String + 5, gInputBox, 3);                             // show the input text
			UI_PrintStringSmall("M", x, 0, Line + 1);
			UI_DisplaySmallDigits(3, String + 5, x + 7, Line + 1, inputting);
		}
		else
		if (IS_FREQ_CHANNEL(gEeprom.ScreenChannel[vfo_num]))
		{	// frequency mode
			// show the frequency band number
			const unsigned int x = 2;	// was 14
//			sprintf(String, "FB%u", 1 + gEeprom.ScreenChannel[vfo_num] - FREQ_CHANNEL_FIRST);
			sprintf(String, "VFO%u", 1 + gEeprom.ScreenChannel[vfo_num] - FREQ_CHANNEL_FIRST);
			UI_PrintStringSmall(String, x, 0, Line + 1);
		}
		#ifdef ENABLE_NOAA
			else
			{
				if (gInputBoxIndex == 0 || gEeprom.TX_CHANNEL != vfo_num)
				{	// channel number
					sprintf(String, "N%u", 1 + gEeprom.ScreenChannel[vfo_num] - NOAA_CHANNEL_FIRST);
				}
				else
				{	// user entering channel number
					sprintf(String, "N%u%u", '0' + gInputBox[0], '0' + gInputBox[1]);
				}
				UI_PrintStringSmall(String, 7, 0, Line + 1);
			}
		#endif

		// ************

		uint8_t State = VfoState[vfo_num];

		#ifdef ENABLE_ALARM
			if (gCurrentFunction == FUNCTION_TRANSMIT && gAlarmState == ALARM_STATE_ALARM)
			{
				Channel = (gEeprom.CROSS_BAND_RX_TX == CROSS_BAND_OFF) ? gEeprom.RX_CHANNEL : gEeprom.TX_CHANNEL;
				if (Channel == vfo_num)
					State = VFO_STATE_ALARM;
			}
		#endif

		if (State != VFO_STATE_NORMAL)
		{
			const char *state_list[] = {"", "BUSY", "BAT LOW", "TX DISABLE", "TIMEOUT", "ALARM", "VOLT HIGH"};
			if (State >= 0 && State < ARRAY_SIZE(state_list))
			{
				UI_PrintString(state_list[State], 31, 0, Line, 8);
			}
			//else
			//{
			//	sprintf(String, "State %u ?", State);
			//	UI_PrintString(String, 31, 0, Line, 8);
			//}
		}
		else
		if (gInputBoxIndex > 0 && IS_FREQ_CHANNEL(gEeprom.ScreenChannel[vfo_num]) && gEeprom.TX_CHANNEL == vfo_num)
		{	// user entering a frequency
			UI_DisplayFrequency(gInputBox, 32, Line, true, false);

			center_line_is_free = false;
		}
		else
		{
			uint32_t frequency = gEeprom.VfoInfo[vfo_num].pRX->Frequency;
			if (gCurrentFunction == FUNCTION_TRANSMIT)
			{	// transmitting
				Channel = (gEeprom.CROSS_BAND_RX_TX == CROSS_BAND_OFF) ? gEeprom.RX_CHANNEL : gEeprom.TX_CHANNEL;
				if (Channel == vfo_num)
					frequency = gEeprom.VfoInfo[vfo_num].pTX->Frequency;
			}

			if (IS_MR_CHANNEL(gEeprom.ScreenChannel[vfo_num]))
			{	// channel mode

				// show the channel symbols
				const uint8_t attributes = gMR_ChannelAttributes[gEeprom.ScreenChannel[vfo_num]];
				if (attributes & MR_CH_SCANLIST1)
					memmove(pLine0 + 113, BITMAP_ScanList1, sizeof(BITMAP_ScanList1));
				if (attributes & MR_CH_SCANLIST2)
					memmove(pLine0 + 120, BITMAP_ScanList2, sizeof(BITMAP_ScanList2));
				#ifndef ENABLE_BIG_FREQ
					#ifdef ENABLE_COMPANDER
						if ((attributes & MR_CH_COMPAND) > 0)
							memmove(pLine0 + 120 + LCD_WIDTH, BITMAP_compand, sizeof(BITMAP_compand));
					#endif
				#endif

				switch (gEeprom.CHANNEL_DISPLAY_MODE)
				{
					case MDF_FREQUENCY:	// show the channel frequency
						#ifdef ENABLE_BIG_FREQ
							NUMBER_ToDigits(frequency, String);
							// show the main large frequency digits
							UI_DisplayFrequency(String, 32, Line, false, false);
							// show the remaining 2 small frequency digits
							UI_DisplaySmallDigits(2, String + 6, 113, Line + 1, true);
						#else
							// show the frequency in the main font
							sprintf(String, "%03u.%05u", frequency / 100000, frequency % 100000);
							UI_PrintString(String, 32, 0, Line, 8);
						#endif
						break;

					case MDF_CHANNEL:	// show the channel number
						sprintf(String, "CH-%03u", gEeprom.ScreenChannel[vfo_num] + 1);
						UI_PrintString(String, 32, 0, Line, 8);
						break;

					case MDF_NAME:		// show the channel name
					case MDF_NAME_FREQ:	// show the channel name and frequency

						BOARD_fetchChannelName(String, gEeprom.ScreenChannel[vfo_num]);
						if (String[0] == 0)
						{	// no channel name, show the channel number instead
							sprintf(String, "CH-%03u", gEeprom.ScreenChannel[vfo_num] + 1);
						}

						if (gEeprom.CHANNEL_DISPLAY_MODE == MDF_NAME)
						{
							UI_PrintString(String, 32, 0, Line, 8);
						}
						else
						{
							#ifdef ENABLE_SMALL_BOLD
								UI_PrintStringSmallBold(String, 32 + 4, 0, Line);
							#else
								UI_PrintStringSmall(String, 32 + 4, 0, Line);
							#endif

							// show the channel frequency below the channel number/name
							sprintf(String, "%03u.%05u", frequency / 100000, frequency % 100000);
							UI_PrintStringSmall(String, 32 + 4, 0, Line + 1);
						}

						break;
				}
			}
			else
			{	// frequency mode
				#ifdef ENABLE_BIG_FREQ
					NUMBER_ToDigits(frequency, String);  // 8 digits
					// show the main large frequency digits
					UI_DisplayFrequency(String, 32, Line, false, false);
					// show the remaining 2 small frequency digits
					UI_DisplaySmallDigits(2, String + 6, 113, Line + 1, true);
				#else
					// show the frequency in the main font
					sprintf(String, "%03u.%05u", frequency / 100000, frequency % 100000);
					UI_PrintString(String, 32, 0, Line, 8);
				#endif

				#ifdef ENABLE_COMPANDER
					// show the channel symbols
					const uint8_t attributes = gMR_ChannelAttributes[gEeprom.ScreenChannel[vfo_num]];
					if ((attributes & MR_CH_COMPAND) > 0)
						#ifdef ENABLE_BIG_FREQ
							memmove(pLine0 + 120, BITMAP_compand, sizeof(BITMAP_compand));
						#else
							memmove(pLine0 + 120 + LCD_WIDTH, BITMAP_compand, sizeof(BITMAP_compand));
						#endif
				#endif
			}
		}

		// ************

		{	// show the TX/RX level
			uint8_t Level = 0;

			if (duff_beer == 1)
			{	// TX power level
				switch (gRxVfo->OUTPUT_POWER)
				{
					case OUTPUT_POWER_LOW:  Level = 2; break;
					case OUTPUT_POWER_MID:  Level = 4; break;
					case OUTPUT_POWER_HIGH: Level = 6; break;
				}
			}
			else
			if (duff_beer == 2)
			{	// RX signal level
				#ifndef ENABLE_RSSI_BAR
					// bar graph
					if (gVFO_RSSI_bar_level[vfo_num] > 0)
						Level = gVFO_RSSI_bar_level[vfo_num];
				#endif
			}

			if (Level >= 1)
			{
				uint8_t *pLine = pLine1 + LCD_WIDTH;
					memmove(pLine +  0, BITMAP_Antenna,       sizeof(BITMAP_Antenna));
				if (Level >= 2)
					memmove(pLine +  5, BITMAP_AntennaLevel1, sizeof(BITMAP_AntennaLevel1));
				if (Level >= 3)
					memmove(pLine +  8, BITMAP_AntennaLevel2, sizeof(BITMAP_AntennaLevel2));
				if (Level >= 4)
					memmove(pLine + 11, BITMAP_AntennaLevel3, sizeof(BITMAP_AntennaLevel3));
				if (Level >= 5)
					memmove(pLine + 14, BITMAP_AntennaLevel4, sizeof(BITMAP_AntennaLevel4));
				if (Level >= 6)
					memmove(pLine + 17, BITMAP_AntennaLevel5, sizeof(BITMAP_AntennaLevel5));
				if (Level >= 7)
					memmove(pLine + 20, BITMAP_AntennaLevel6, sizeof(BITMAP_AntennaLevel6));
			}
		}

		// ************

		String[0] = '\0';
		if (gEeprom.VfoInfo[vfo_num].AM_mode)
		{	// show the AM symbol
			strcpy(String, "AM");
		}
		else
		{	// or show the CTCSS/DCS symbol
			const FREQ_Config_t *pConfig = (duff_beer == 1) ? gEeprom.VfoInfo[vfo_num].pTX : gEeprom.VfoInfo[vfo_num].pRX;
			const unsigned int code_type = pConfig->CodeType;
			const char *code_list[] = {"", "CT", "DCS", "DCR"};
			if (code_type >= 0 && code_type < ARRAY_SIZE(code_list))
				strcpy(String, code_list[code_type]);
		}
		UI_PrintStringSmall(String, LCD_WIDTH + 24, 0, Line + 1);

		if (State != VFO_STATE_TX_DISABLE)
		{	// show the TX power
			const char pwr_list[] = "LMH";
			const unsigned int i = gEeprom.VfoInfo[vfo_num].OUTPUT_POWER;
			String[0] = (i >= 0 && i < ARRAY_SIZE(pwr_list)) ? pwr_list[i] : '\0';
			String[1] = '\0';
			UI_PrintStringSmall(String, LCD_WIDTH + 46, 0, Line + 1);
		}

		if (gEeprom.VfoInfo[vfo_num].freq_config_RX.Frequency != gEeprom.VfoInfo[vfo_num].freq_config_TX.Frequency)
		{	// show the TX offset symbol
			const char dir_list[] = "\0+-";
			const unsigned int i = gEeprom.VfoInfo[vfo_num].TX_OFFSET_FREQUENCY_DIRECTION;
			String[0] = (i < sizeof(dir_list)) ? dir_list[i] : '?';
			String[1] = '\0';
			UI_PrintStringSmall(String, LCD_WIDTH + 54, 0, Line + 1);
		}

		// show the TX/RX reverse symbol
		if (gEeprom.VfoInfo[vfo_num].FrequencyReverse)
			UI_PrintStringSmall("R", LCD_WIDTH + 62, 0, Line + 1);

		{	// show the narrow band symbol
			String[0] = '\0';
			if (gEeprom.VfoInfo[vfo_num].CHANNEL_BANDWIDTH == BANDWIDTH_NARROW)
			{
				String[0] = 'N';
				String[1] = '\0';
			}
			UI_PrintStringSmall(String, LCD_WIDTH + 70, 0, Line + 1);
		}

		// show the DTMF decoding symbol
		if (gEeprom.VfoInfo[vfo_num].DTMF_DECODING_ENABLE || gSetting_KILLED)
			UI_PrintStringSmall("DTMF", LCD_WIDTH + 78, 0, Line + 1);

		// show the audio scramble symbol
		if (gEeprom.VfoInfo[vfo_num].SCRAMBLING_TYPE > 0 && gSetting_ScrambleEnable)
			UI_PrintStringSmall("SCR", LCD_WIDTH + 106, 0, Line + 1);
	}

	if (center_line_is_free)
	{	// we're free to use the middle line

		const bool rx = (gCurrentFunction == FUNCTION_RECEIVE ||
		                 gCurrentFunction == FUNCTION_MONITOR ||
		                 gCurrentFunction == FUNCTION_INCOMING);

		#ifdef ENABLE_AUDIO_BAR
			if (gSetting_mic_bar && gCurrentFunction == FUNCTION_TRANSMIT)
				UI_DisplayAudioBar();
			else
		#endif

		#if defined(ENABLE_AM_FIX) && defined(ENABLE_AM_FIX_SHOW_DATA)
			if (gEeprom.VfoInfo[gEeprom.RX_CHANNEL].AM_mode && gSetting_AM_fix)
			{
				if (rx)
				{
					AM_fix_print_data(gEeprom.RX_CHANNEL, String);
					UI_PrintStringSmall(String, 2, 0, 3);
				}
			}
			else
		#endif

		#ifdef ENABLE_RSSI_BAR
			if (rx)
				UI_DisplayRSSIBar(gCurrentRSSI[gEeprom.RX_CHANNEL], false);
			else
		#endif

		if (rx || gCurrentFunction == FUNCTION_FOREGROUND)
		{
			#if 1
				if (gSetting_live_DTMF_decoder && gDTMF_RX_live[0] != 0)
				{	// show live DTMF decode
					const unsigned int len = strlen(gDTMF_RX_live);
					const unsigned int idx = (len > (17 - 5)) ? len - (17 - 5) : 0;  // limit to last 'n' chars
					strcpy(String, "DTMF ");
					strcat(String, gDTMF_RX_live + idx);
					UI_PrintStringSmall(String, 2, 0, 3);
				}
			#else
				if (gSetting_live_DTMF_decoder && gDTMF_RX_index > 0)
				{	// show live DTMF decode
					const unsigned int len = gDTMF_RX_index;
					const unsigned int idx = (len > (17 - 5)) ? len - (17 - 5) : 0;  // limit to last 'n' chars
					strcpy(String, "DTMF ");
					strcat(String, gDTMF_RX + idx);
					UI_PrintStringSmall(String, 2, 0, 3);
				}
			#endif

			#ifdef ENABLE_SHOW_CHARGE_LEVEL
				else
				if (gChargingWithTypeC)
				{	// charging .. show the battery state
					const uint16_t volts   = (gBatteryVoltageAverage < gMin_bat_v) ? gMin_bat_v : gBatteryVoltageAverage;
					const uint16_t percent = (100 * (volts - gMin_bat_v)) / (gMax_bat_v - gMin_bat_v);
					sprintf(String, "Charge %u.%02uV %u%%", gBatteryVoltageAverage / 100, gBatteryVoltageAverage % 100, percent);
					UI_PrintStringSmall(String, 2, 0, 3);
				}
			#endif
		}
	}

	ST7565_BlitFullScreen();
}

// ***************************************************************************