0
mirror of https://github.com/OneOfEleven/uv-k5-firmware-custom.git synced 2025-04-27 22:01:26 +03:00
OneOfEleven b704e7efa3 .
2023-11-09 05:59:50 +00:00

99 lines
2.5 KiB
C

/* Copyright 2023 Dual Tachyon
* https://github.com/DualTachyon
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifdef ENABLE_AIRCOPY
#include "app/aircopy.h"
#endif
#include "bsp/dp32g030/gpio.h"
#include "driver/bk4819.h"
#include "driver/keyboard.h"
#include "driver/gpio.h"
#include "driver/system.h"
#include "helper/boot.h"
#include "misc.h"
#include "radio.h"
#include "settings.h"
#include "ui/menu.h"
#include "ui/ui.h"
boot_mode_t BOOT_GetMode(void)
{
unsigned int i;
key_code_t Keys[2];
for (i = 0; i < 2; i++)
{
if (GPIO_CheckBit(&GPIOC->DATA, GPIOC_PIN_PTT))
return BOOT_MODE_NORMAL; // PTT not pressed
Keys[i] = KEYBOARD_Poll();
SYSTEM_DelayMs(20);
}
if (Keys[0] == Keys[1])
{
if (Keys[0] == KEY_SIDE1)
return BOOT_MODE_UNHIDE_HIDDEN;
#ifdef ENABLE_AIRCOPY
if (Keys[0] == KEY_SIDE2)
return BOOT_MODE_AIRCOPY;
#endif
}
return BOOT_MODE_NORMAL;
}
void BOOT_ProcessMode(boot_mode_t Mode)
{
if (Mode == BOOT_MODE_UNHIDE_HIDDEN)
{
GUI_SelectNextDisplay(DISPLAY_MENU);
}
#ifdef ENABLE_AIRCOPY
else
if (Mode == BOOT_MODE_AIRCOPY)
{
g_eeprom.config.setting.dual_watch = DUAL_WATCH_OFF;
g_eeprom.config.setting.battery_save_ratio = 0;
#ifdef ENABLE_VOX
g_eeprom.config.setting.vox_enabled = false;
#endif
g_eeprom.config.setting.cross_vfo = CROSS_BAND_OFF;
g_eeprom.config.setting.auto_key_lock = 0;
g_eeprom.config.setting.key1_short = ACTION_OPT_NONE;
g_eeprom.config.setting.key1_long = ACTION_OPT_NONE;
g_eeprom.config.setting.key2_short = ACTION_OPT_NONE;
g_eeprom.config.setting.key2_long = ACTION_OPT_NONE;
RADIO_InitInfo(g_rx_vfo, FREQ_CHANNEL_LAST - 1, g_aircopy_freq);
g_rx_vfo->channel.channel_bandwidth = BANDWIDTH_WIDE;
g_rx_vfo->channel.tx_power = OUTPUT_POWER_LOW;
RADIO_ConfigureSquelch(g_rx_vfo);
RADIO_ConfigureTXPower(g_rx_vfo);
g_current_vfo = g_rx_vfo;
AIRCOPY_init();
}
#endif
else
{
GUI_SelectNextDisplay(DISPLAY_MAIN);
}
}