uv-k5-firmware-custom/driver/bk1080.c

/* Copyright 2023 Dual Tachyon
 * https://github.com/DualTachyon
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 *     Unless required by applicable law or agreed to in writing, software
 *     distributed under the License is distributed on an "AS IS" BASIS,
 *     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *     See the License for the specific language governing permissions and
 *     limitations under the License.
 */

#include "bsp/dp32g030/gpio.h"
#include "bk1080.h"
#include "driver/gpio.h"
#include "driver/i2c.h"
#include "driver/system.h"
#include "misc.h"

#if   defined(ENABLE_FMRADIO_64_76)
	#define BAND           3u
#elif defined(ENABLE_FMRADIO_76_90)
	#define BAND           2u
#elif defined(ENABLE_FMRADIO_76_108)
	#define BAND           1u
#elif defined(ENABLE_FMRADIO_875_108)
	#define BAND           0u
#endif

//#define CHAN_SPACING     0u  // 200kHz
  #define CHAN_SPACING     1u  // 100kHz
//#define CHAN_SPACING     2u  // 50kHz

#define VOLUME             15u

#define SEEK_THRESHOLD     10u

static const uint16_t BK1080_RegisterTable[] =
{
	0x0008,                 // 0x00
	0x1080,                 // 0x01   chip ID
	(1u << 9) | (1u << 0),  // 0x02   0x0201  0000001000000001
	0x0000,                 // 0x03
	0x40C0,                 // 0x04   0100000011000000
	(SEEK_THRESHOLD << 8) | (BAND << 6) | (CHAN_SPACING << 4) | (VOLUME << 0), // 0x0A1F,  // 0x05  00001010 00 01 1111
	0x002E,                 // 0x06   0000000000101110
	0x02FF,                 // 0x07   0000001011111111
	0x5B11,                 // 0x08   0101101100010001
	0x0000,                 // 0x09
	0x411E,                 // 0x0A   0100000100011110
	0x0000,                 // 0x0B
	0xCE00,                 // 0x0C   1100111000000000
	0x0000,                 // 0x0D
	0x0000,                 // 0x0E
	0x1000,                 // 0x0F   1000000000000000
	0x3197,                 // 0x10   0011000110010111
	0x0000,                 // 0x11
	0x13FF,                 // 0x12   0001001111111111
	0x9852,                 // 0x13   1001100001010010
	0x0000,                 // 0x14
	0x0000,                 // 0x15
	0x0008,                 // 0x16
	0x0000,                 // 0x17
	0x51E1,                 // 0x18   0101000111100001
	0xA8BC,                 // 0x19   1010100010111100
	0x2645,                 // 0x1A   0010011001000101
	0x00E4,                 // 0x1B   0000000011100100
	0x1CD8,                 // 0x1C   0001110011011000
	0x3A50,                 // 0x1D   0011101001010000
	0xEAE0,                 // 0x1E   1110101011100000
	0x3000,                 // 0x1F   0011000000000000
	0x0200,                 // 0x20   0010000000000000
	0x0000                  // 0x21
};

bool     is_init;
uint16_t BK1080_BaseFrequency;
uint16_t BK1080_FrequencyDeviation;

void BK1080_Init(uint16_t Frequency, bool bDoScan)
{
	unsigned int i;

	if (bDoScan)
	{
		GPIO_ClearBit(&GPIOB->DATA, GPIOB_PIN_BK1080);

		if (!is_init)
		{
			for (i = 0; i < ARRAY_SIZE(BK1080_RegisterTable); i++)
				BK1080_WriteRegister(i, BK1080_RegisterTable[i]);

			SYSTEM_DelayMs(250);

			BK1080_WriteRegister(BK1080_REG_25_INTERNAL, 0xA83C);
			BK1080_WriteRegister(BK1080_REG_25_INTERNAL, 0xA8BC);

			SYSTEM_DelayMs(60);

			is_init = true;
		}
		else
		{
			BK1080_WriteRegister(BK1080_REG_02_POWER_CONFIGURATION, (1u << 9) | (1u << 0));
		}

//		BK1080_WriteRegister(BK1080_REG_05_SYSTEM_CONFIGURATION2, 0x0A5F);
		BK1080_WriteRegister(BK1080_REG_05_SYSTEM_CONFIGURATION2, (SEEK_THRESHOLD << 8) | (BAND << 6) | (CHAN_SPACING << 4) | (VOLUME << 0));

		BK1080_SetFrequency(Frequency);
	}
	else
	{
		BK1080_WriteRegister(BK1080_REG_02_POWER_CONFIGURATION, (1u << 9) | (1u << 6) | (1u << 0)); // 0x0241); // 0000 0010 0100 0001
		GPIO_SetBit(&GPIOB->DATA, GPIOB_PIN_BK1080);
	}
}

uint16_t BK1080_ReadRegister(BK1080_Register_t Register)
{
	uint8_t Value[2];
	I2C_Start();
	I2C_Write(0x80);
	I2C_Write((Register << 1) | I2C_READ);
	I2C_ReadBuffer(Value, sizeof(Value));
	I2C_Stop();

	return (Value[0] << 8) | Value[1];
}

void BK1080_WriteRegister(BK1080_Register_t Register, uint16_t Value)
{
	I2C_Start();
	I2C_Write(0x80);
	I2C_Write((Register << 1) | I2C_WRITE);
	Value = ((Value >> 8) & 0xFF) | ((Value & 0xFF) << 8);
	I2C_WriteBuffer(&Value, sizeof(Value));
	I2C_Stop();
}

void BK1080_Mute(bool Mute)
{
	uint16_t val = (1u << 9) | (1u << 0);
	if (Mute)
		val |= 1u << 14;
	BK1080_WriteRegister(BK1080_REG_02_POWER_CONFIGURATION, val);
	
}

void BK1080_SetFrequency(uint16_t Frequency)
{
#if   defined(ENABLE_FMRADIO_64_76)

	const uint16_t channel = Frequency - 640;  // 100kHz channel spacing

#elif defined(ENABLE_FMRADIO_76_90)

	const uint16_t channel = Frequency - 760;  // 100kHz channel spacing

#elif defined(ENABLE_FMRADIO_76_108)

	const uint16_t channel = Frequency - 760;  // 100kHz channel spacing

#elif defined(ENABLE_FMRADIO_875_108)

//	const uint16_t channel = Frequency - 760;
	const uint16_t channel = Frequency - 875;  // 100kHz channel spacing

#endif

	BK1080_WriteRegister(BK1080_REG_03_CHANNEL, channel);
//	SYSTEM_DelayMs(10);
	BK1080_WriteRegister(BK1080_REG_03_CHANNEL, channel | (1u << 15));
}

uint16_t BK1080_GetFrequencyDeviation(uint16_t Frequency)
{
	BK1080_BaseFrequency      = Frequency;
	BK1080_FrequencyDeviation = BK1080_ReadRegister(BK1080_REG_07) >> 4;
	return BK1080_FrequencyDeviation;
}