mirrors/uv-k5-firmware-custom
0
Fork 0
mirror of https://github.com/OneOfEleven/uv-k5-firmware-custom.git synced 2025-04-27 22:01:26 +03:00
Code Issues Releases Activity
uv-k5-firmware-custom/driver/bk4819.c
OneOfEleven 1e3b26768e Overlay stuff
2023-09-16 07:08:18 +01:00

1177 lines
36 KiB
C
Raw Blame History

/* Copyright 2023 Dual Tachyon
* https://github.com/DualTachyon
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "bk4819.h"
#include "bsp/dp32g030/gpio.h"
#include "bsp/dp32g030/portcon.h"
#include "driver/gpio.h"
#include "driver/system.h"
#include "driver/systick.h"
static const uint16_t FSK_RogerTable[7] = {0xF1A2, 0x7446, 0x61A4, 0x6544, 0x4E8A, 0xE044, 0xEA84};
static uint16_t gBK4819_GpioOutState;
bool gRxIdleMode;
__inline uint16_t scale_freq(const uint16_t freq)
{
// return (((uint32_t)freq * 1032444u) + 50000u) / 100000u; // with rounding
return (((uint32_t)freq * 1353245u) + (1u << 16)) >> 17; // with rounding
}
void BK4819_Init(void)
{
GPIO_SetBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SCN);
GPIO_SetBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SCL);
GPIO_SetBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SDA);
BK4819_WriteRegister(BK4819_REG_00, 0x8000);
BK4819_WriteRegister(BK4819_REG_00, 0x0000);
BK4819_WriteRegister(BK4819_REG_37, 0x1D0F);
BK4819_WriteRegister(BK4819_REG_36, 0x0022);
BK4819_SetAGC(0);
BK4819_WriteRegister(BK4819_REG_19, 0x1041);
BK4819_WriteRegister(BK4819_REG_7D, 0xE940);
BK4819_WriteRegister(BK4819_REG_48, 0xB3A8);
BK4819_WriteRegister(BK4819_REG_09, 0x006F);
BK4819_WriteRegister(BK4819_REG_09, 0x106B);
BK4819_WriteRegister(BK4819_REG_09, 0x2067);
BK4819_WriteRegister(BK4819_REG_09, 0x3062);
BK4819_WriteRegister(BK4819_REG_09, 0x4050);
BK4819_WriteRegister(BK4819_REG_09, 0x5047);
BK4819_WriteRegister(BK4819_REG_09, 0x603A);
BK4819_WriteRegister(BK4819_REG_09, 0x702C);
BK4819_WriteRegister(BK4819_REG_09, 0x8041);
BK4819_WriteRegister(BK4819_REG_09, 0x9037);
BK4819_WriteRegister(BK4819_REG_09, 0xA025);
BK4819_WriteRegister(BK4819_REG_09, 0xB017);
BK4819_WriteRegister(BK4819_REG_09, 0xC0E4);
BK4819_WriteRegister(BK4819_REG_09, 0xD0CB);
BK4819_WriteRegister(BK4819_REG_09, 0xE0B5);
BK4819_WriteRegister(BK4819_REG_09, 0xF09F);
BK4819_WriteRegister(BK4819_REG_1F, 0x5454);
BK4819_WriteRegister(BK4819_REG_3E, 0xA037);
gBK4819_GpioOutState = 0x9000;
BK4819_WriteRegister(BK4819_REG_33, 0x9000);
BK4819_WriteRegister(BK4819_REG_3F, 0);
}
static uint16_t BK4819_ReadU16(void)
{
unsigned int i;
uint16_t Value;
PORTCON_PORTC_IE = (PORTCON_PORTC_IE & ~PORTCON_PORTC_IE_C2_MASK) | PORTCON_PORTC_IE_C2_BITS_ENABLE;
GPIOC->DIR = (GPIOC->DIR & ~GPIO_DIR_2_MASK) | GPIO_DIR_2_BITS_INPUT;
SYSTICK_DelayUs(1);
Value = 0;
for (i = 0; i < 16; i++)
{
Value <<= 1;
Value |= GPIO_CheckBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SDA);
GPIO_SetBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SCL);
SYSTICK_DelayUs(1);
GPIO_ClearBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SCL);
SYSTICK_DelayUs(1);
}
PORTCON_PORTC_IE = (PORTCON_PORTC_IE & ~PORTCON_PORTC_IE_C2_MASK) | PORTCON_PORTC_IE_C2_BITS_DISABLE;
GPIOC->DIR = (GPIOC->DIR & ~GPIO_DIR_2_MASK) | GPIO_DIR_2_BITS_OUTPUT;
return Value;
}
uint16_t BK4819_ReadRegister(BK4819_REGISTER_t Register)
{
uint16_t Value;
GPIO_SetBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SCN);
GPIO_ClearBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SCL);
SYSTICK_DelayUs(1);
GPIO_ClearBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SCN);
BK4819_WriteU8(Register | 0x80);
Value = BK4819_ReadU16();
GPIO_SetBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SCN);
SYSTICK_DelayUs(1);
GPIO_SetBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SCL);
GPIO_SetBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SDA);
return Value;
}
void BK4819_WriteRegister(BK4819_REGISTER_t Register, uint16_t Data)
{
GPIO_SetBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SCN);
GPIO_ClearBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SCL);
SYSTICK_DelayUs(1);
GPIO_ClearBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SCN);
BK4819_WriteU8(Register);
SYSTICK_DelayUs(1);
BK4819_WriteU16(Data);
SYSTICK_DelayUs(1);
GPIO_SetBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SCN);
SYSTICK_DelayUs(1);
GPIO_SetBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SCL);
GPIO_SetBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SDA);
}
void BK4819_WriteU8(uint8_t Data)
{
unsigned int i;
GPIO_ClearBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SCL);
for (i = 0; i < 8; i++)
{
if ((Data & 0x80) == 0)
GPIO_ClearBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SDA);
else
GPIO_SetBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SDA);
SYSTICK_DelayUs(1);
GPIO_SetBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SCL);
SYSTICK_DelayUs(1);
Data <<= 1;
GPIO_ClearBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SCL);
SYSTICK_DelayUs(1);
}
}
void BK4819_WriteU16(uint16_t Data)
{
unsigned int i;
GPIO_ClearBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SCL);
for (i = 0; i < 16; i++)
{
if ((Data & 0x8000) == 0)
GPIO_ClearBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SDA);
else
GPIO_SetBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SDA);
SYSTICK_DelayUs(1);
GPIO_SetBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SCL);
Data <<= 1;
SYSTICK_DelayUs(1);
GPIO_ClearBit(&GPIOC->DATA, GPIOC_PIN_BK4819_SCL);
SYSTICK_DelayUs(1);
}
}
void BK4819_SetAGC(uint8_t Value)
{
if (Value == 0)
{
BK4819_WriteRegister(BK4819_REG_13, 0x03BE);
BK4819_WriteRegister(BK4819_REG_12, 0x037B);
BK4819_WriteRegister(BK4819_REG_11, 0x027B);
BK4819_WriteRegister(BK4819_REG_10, 0x007A);
BK4819_WriteRegister(BK4819_REG_14, 0x0019);
BK4819_WriteRegister(BK4819_REG_49, 0x2A38);
BK4819_WriteRegister(BK4819_REG_7B, 0x8420);
}
else
if (Value == 1)
{
unsigned int i;
BK4819_WriteRegister(BK4819_REG_13, 0x03BE);
BK4819_WriteRegister(BK4819_REG_12, 0x037C);
BK4819_WriteRegister(BK4819_REG_11, 0x027B);
BK4819_WriteRegister(BK4819_REG_10, 0x007A);
BK4819_WriteRegister(BK4819_REG_14, 0x0018);
BK4819_WriteRegister(BK4819_REG_49, 0x2A38);
BK4819_WriteRegister(BK4819_REG_7B, 0x318C);
BK4819_WriteRegister(BK4819_REG_7C, 0x595E);
BK4819_WriteRegister(BK4819_REG_20, 0x8DEF);
for (i = 0; i < 8; i++)
// Bug? The bit 0x2000 below overwrites the (i << 13)
BK4819_WriteRegister(BK4819_REG_06, ((i << 13) | 0x2500u) + 0x036u);
}
}
void BK4819_ToggleGpioOut(BK4819_GPIO_PIN_t Pin, bool bSet)
{
if (bSet)
gBK4819_GpioOutState |= (0x40u >> Pin);
else
gBK4819_GpioOutState &= ~(0x40u >> Pin);
BK4819_WriteRegister(BK4819_REG_33, gBK4819_GpioOutState);
}
void BK4819_SetCDCSSCodeWord(uint32_t CodeWord)
{
// REG_51 <15> 0 1 = Enable TxCTCSS/CDCSS 0 = Disable
// REG_51 <14> 0 1 = GPIO0Input for CDCSS 0 = Normal Mode.(for BK4819v3)
// REG_51 <13> 0 1 = Transmit negative CDCSS code 0 = Transmit positive CDCSScode
// REG_51 <12> 0 CTCSS/CDCSS mode selection 1 = CTCSS 0 = CDCSS
// REG_51 <11> 0 CDCSS 24/23bit selection 1 = 24bit 0 = 23bit
// REG_51 <10> 0 1050HzDetectionMode 1 = 1050/4 Detect Enable, CTC1 should be set to 1050/4 Hz
// REG_51 <9> 0 Auto CDCSS Bw Mode 1 = Disable 0 = Enable.
// REG_51 <8> 0 Auto CTCSS Bw Mode 0 = Enable 1 = Disable
// REG_51 <6:0> 0 CTCSS/CDCSS Tx Gain1 Tuning 0 = min 127 = max
// Enable CDCSS
// Transmit positive CDCSS code
// CDCSS Mode
// CDCSS 23bit
// Enable Auto CDCSS Bw Mode
// Enable Auto CTCSS Bw Mode
// CTCSS/CDCSS Tx Gain1 Tuning = 51
//
BK4819_WriteRegister(BK4819_REG_51,
BK4819_REG_51_ENABLE_CxCSS
| BK4819_REG_51_GPIO6_PIN2_NORMAL
| BK4819_REG_51_TX_CDCSS_POSITIVE
| BK4819_REG_51_MODE_CDCSS
| BK4819_REG_51_CDCSS_23_BIT
| BK4819_REG_51_1050HZ_NO_DETECTION
| BK4819_REG_51_AUTO_CDCSS_BW_ENABLE
| BK4819_REG_51_AUTO_CTCSS_BW_ENABLE
| (51u << BK4819_REG_51_SHIFT_CxCSS_TX_GAIN1));
// REG_07 <15:0>
//
// When <13> = 0 for CTC1
// <12:0> = CTC1 frequency control word =
// freq(Hz) * 20.64888 for XTAL 13M/26M or
// freq(Hz) * 20.97152 for XTAL 12.8M/19.2M/25.6M/38.4M
//
// When <13> = 1 for CTC2 (Tail 55Hz Rx detection)
// <12:0> = CTC2 (should below 100Hz) frequency control word =
// 25391 / freq(Hz) for XTAL 13M/26M or
// 25000 / freq(Hz) for XTAL 12.8M/19.2M/25.6M/38.4M
//
// When <13> = 2 for CDCSS 134.4Hz
// <12:0> = CDCSS baud rate frequency (134.4Hz) control word =
// freq(Hz) * 20.64888 for XTAL 13M/26M or
// freq(Hz) * 20.97152 for XTAL 12.8M/19.2M/25.6M/38.4M
//
BK4819_WriteRegister(BK4819_REG_07, BK4819_REG_07_MODE_CTC1 | 2775u);
// REG_08 <15:0> <15> = 1 for CDCSS high 12bit
// <15> = 0 for CDCSS low 12bit
// <11:0> = CDCSShigh/low 12bit code
//
BK4819_WriteRegister(BK4819_REG_08, (0u << 15) | ((CodeWord >> 0) & 0x0FFF)); // LS 12-bits
BK4819_WriteRegister(BK4819_REG_08, (1u << 15) | ((CodeWord >> 12) & 0x0FFF)); // MS 12-bits
}
void BK4819_SetCTCSSFrequency(uint32_t FreqControlWord)
{
// REG_51 <15> 0 1 = Enable TxCTCSS/CDCSS 0 = Disable
// REG_51 <14> 0 1 = GPIO0Input for CDCSS 0 = Normal Mode.(for BK4819v3)
// REG_51 <13> 0 1 = Transmit negative CDCSS code 0 = Transmit positive CDCSScode
// REG_51 <12> 0 CTCSS/CDCSS mode selection 1 = CTCSS 0 = CDCSS
// REG_51 <11> 0 CDCSS 24/23bit selection 1 = 24bit 0 = 23bit
// REG_51 <10> 0 1050HzDetectionMode 1 = 1050/4 Detect Enable, CTC1 should be set to 1050/4 Hz
// REG_51 <9> 0 Auto CDCSS Bw Mode 1 = Disable 0 = Enable.
// REG_51 <8> 0 Auto CTCSS Bw Mode 0 = Enable 1 = Disable
// REG_51 <6:0> 0 CTCSS/CDCSS Tx Gain1 Tuning 0 = min 127 = max
uint16_t Config;
if (FreqControlWord == 2625)
{ // Enables 1050Hz detection mode
// Enable TxCTCSS
// CTCSS Mode
// 1050/4 Detect Enable
// Enable Auto CDCSS Bw Mode
// Enable Auto CTCSS Bw Mode
// CTCSS/CDCSS Tx Gain1 Tuning = 74
//
Config = 0x944A; // 1 0 0 1 0 1 0 0 0 1001010
}
else
{ // Enable TxCTCSS
// CTCSS Mode
// Enable Auto CDCSS Bw Mode
// Enable Auto CTCSS Bw Mode
// CTCSS/CDCSS Tx Gain1 Tuning = 74
//
Config = 0x904A; // 1 0 0 1 0 0 0 0 0 1001010
}
BK4819_WriteRegister(BK4819_REG_51, Config);
// REG_07 <15:0>
//
// When <13> = 0 for CTC1
// <12:0> = CTC1 frequency control word =
// freq(Hz) * 20.64888 for XTAL 13M/26M or
// freq(Hz) * 20.97152 for XTAL 12.8M/19.2M/25.6M/38.4M
//
// When <13> = 1 for CTC2 (Tail RX detection)
// <12:0> = CTC2 (should below 100Hz) frequency control word =
// 25391 / freq(Hz) for XTAL 13M/26M or
// 25000 / freq(Hz) for XTAL 12.8M/19.2M/25.6M/38.4M
//
// When <13> = 2 for CDCSS 134.4Hz
// <12:0> = CDCSS baud rate frequency (134.4Hz) control word =
// freq(Hz) * 20.64888 for XTAL 13M/26M or
// freq(Hz) * 20.97152 for XTAL 12.8M/19.2M/25.6M/38.4M
//
BK4819_WriteRegister(BK4819_REG_07, BK4819_REG_07_MODE_CTC1 | (((FreqControlWord * 2064888u) + 500000u) / 1000000u)); // with rounding
}
// freq_10Hz is CTCSS Hz * 10
void BK4819_SetTailDetection(const uint32_t freq_10Hz)
{
// REG_07 <15:0>
//
// When <13> = 0 for CTC1
// <12:0> = CTC1 frequency control word =
// freq(Hz) * 20.64888 for XTAL 13M/26M or
// freq(Hz) * 20.97152 for XTAL 12.8M/19.2M/25.6M/38.4M
//
// When <13> = 1 for CTC2 (Tail RX detection)
// <12:0> = CTC2 (should below 100Hz) frequency control word =
// 25391 / freq(Hz) for XTAL 13M/26M or
// 25000 / freq(Hz) for XTAL 12.8M/19.2M/25.6M/38.4M
//
// When <13> = 2 for CDCSS 134.4Hz
// <12:0> = CDCSS baud rate frequency (134.4Hz) control word =
// freq(Hz) * 20.64888 for XTAL 13M/26M or
// freq(Hz) * 20.97152 for XTAL 12.8M/19.2M/25.6M/38.4M
//
BK4819_WriteRegister(BK4819_REG_07, BK4819_REG_07_MODE_CTC2 | ((253910 + (freq_10Hz / 2)) / freq_10Hz)); // with rounding
}
void BK4819_EnableVox(uint16_t VoxEnableThreshold, uint16_t VoxDisableThreshold)
{
//VOX Algorithm
//if (voxamp>VoxEnableThreshold) VOX = 1;
//else
//if (voxamp<VoxDisableThreshold) (After Delay) VOX = 0;
const uint16_t REG_31_Value = BK4819_ReadRegister(BK4819_REG_31);
// 0xA000 is undocumented?
BK4819_WriteRegister(BK4819_REG_46, 0xA000 | (VoxEnableThreshold & 0x07FF));
// 0x1800 is undocumented?
BK4819_WriteRegister(BK4819_REG_79, 0x1800 | (VoxDisableThreshold & 0x07FF));
// Bottom 12 bits are undocumented, 15:12 vox disable delay *128ms
BK4819_WriteRegister(BK4819_REG_7A, 0x289A); // vox disable delay = 128*5 = 640ms
// Enable VOX
BK4819_WriteRegister(BK4819_REG_31, REG_31_Value | (1u << 2)); // VOX Enable
}
void BK4819_SetFilterBandwidth(BK4819_FilterBandwidth_t Bandwidth)
{
if (Bandwidth == BK4819_FILTER_BW_WIDE)
BK4819_WriteRegister(BK4819_REG_43, 0x3028);
else
if (Bandwidth == BK4819_FILTER_BW_NARROW)
BK4819_WriteRegister(BK4819_REG_43, 0x4048);
//BK4819_WriteRegister(BK4819_REG_43, 0x790C); // fastest squelch, https://github.com/fagci/uv-k5-firmware-fagci-mod
}
void BK4819_SetupPowerAmplifier(uint16_t Bias, uint32_t Frequency)
{
uint8_t Gain;
if (Bias > 255)
Bias = 255;
if (Frequency < 28000000)
{
// Gain 1 = 1
// Gain 2 = 0
Gain = 0x08U;
}
else
{
// Gain 1 = 4
// Gain 2 = 2
Gain = 0x22U;
}
// Enable PACTLoutput
BK4819_WriteRegister(BK4819_REG_36, (Bias << 8) | 0x80U | Gain);
}
void BK4819_SetFrequency(uint32_t Frequency)
{
BK4819_WriteRegister(BK4819_REG_38, (Frequency >> 0) & 0xFFFF);
BK4819_WriteRegister(BK4819_REG_39, (Frequency >> 16) & 0xFFFF);
}
void BK4819_SetupSquelch(uint8_t SquelchOpenRSSIThresh, uint8_t SquelchCloseRSSIThresh, uint8_t SquelchOpenNoiseThresh, uint8_t SquelchCloseNoiseThresh, uint8_t SquelchCloseGlitchThresh, uint8_t SquelchOpenGlitchThresh)
{
BK4819_WriteRegister(BK4819_REG_70, 0);
#if 1
BK4819_WriteRegister(BK4819_REG_4D, 0xA000 | SquelchCloseGlitchThresh);
#else
// fastest squelch, https://github.com/fagci/uv-k5-firmware-fagci-mod this doesn't work
BK4819_WriteRegister(BK4819_REG_4D, 0b01000000 | SquelchCloseGlitchThresh);
#endif
// 0x6f = 0110 1111 meaning the default sql delays from the datasheet are used (101 and 111)
BK4819_WriteRegister(BK4819_REG_4E, 0x6F00 | SquelchOpenGlitchThresh);
BK4819_WriteRegister(BK4819_REG_4F, (SquelchCloseNoiseThresh << 8) | SquelchOpenNoiseThresh);
BK4819_WriteRegister(BK4819_REG_78, (SquelchOpenRSSIThresh << 8) | SquelchCloseRSSIThresh);
BK4819_SetAF(BK4819_AF_MUTE);
BK4819_RX_TurnOn();
}
void BK4819_SetAF(BK4819_AF_Type_t AF)
{
// AF Output Inverse Mode = Inverse
// Undocumented bits 0x2040
BK4819_WriteRegister(BK4819_REG_47, 0x6040 | (AF << 8));
}
void BK4819_RX_TurnOn(void)
{
// DSP Voltage Setting = 1
// ANA LDO = 2.7v
// VCO LDO = 2.7v
// RF LDO = 2.7v
// PLL LDO = 2.7v
// ANA LDO bypass
// VCO LDO bypass
// RF LDO bypass
// PLL LDO bypass
// Reserved bit is 1 instead of 0
// Enable DSP
// Enable XTAL
// Enable Band Gap
BK4819_WriteRegister(BK4819_REG_37, 0x1F0F);
// Turn off everything
BK4819_WriteRegister(BK4819_REG_30, 0);
// Enable VCO Calibration
// Enable RX Link
// Enable AF DAC
// Enable PLL/VCO
// Disable PA Gain
// Disable MIC ADC
// Disable TX DSP
// Enable RX DSP
BK4819_WriteRegister(BK4819_REG_30, 0xBFF1);
}
void BK4819_PickRXFilterPathBasedOnFrequency(uint32_t Frequency)
{
if (Frequency < 28000000)
{
BK4819_ToggleGpioOut(BK4819_GPIO2_PIN30, true);
BK4819_ToggleGpioOut(BK4819_GPIO3_PIN31, false);
}
else
if (Frequency == 0xFFFFFFFF)
{
BK4819_ToggleGpioOut(BK4819_GPIO2_PIN30, false);
BK4819_ToggleGpioOut(BK4819_GPIO3_PIN31, false);
}
else
{
BK4819_ToggleGpioOut(BK4819_GPIO2_PIN30, false);
BK4819_ToggleGpioOut(BK4819_GPIO3_PIN31, true);
}
}
void BK4819_DisableScramble(void)
{
const uint16_t Value = BK4819_ReadRegister(BK4819_REG_31);
BK4819_WriteRegister(BK4819_REG_31, Value & ~(1u << 1));
}
void BK4819_EnableScramble(uint8_t Type)
{
const uint16_t Value = BK4819_ReadRegister(BK4819_REG_31);
BK4819_WriteRegister(BK4819_REG_31, Value | (1u << 1));
BK4819_WriteRegister(BK4819_REG_71, 0x68DC + (Type * 1032));
}
bool BK4819_CompanderEnabled(void)
{
return (BK4819_ReadRegister(BK4819_REG_31) & (1u < 3)) ? true : false;
}
void BK4819_DisableCompander(void)
{
const uint16_t Value = BK4819_ReadRegister(BK4819_REG_31);
BK4819_WriteRegister(BK4819_REG_31, Value & ~(1u < 3));
}
void BK4819_EnableCompander(void)
{
uint16_t val;
val = BK4819_ReadRegister(BK4819_REG_31);
BK4819_WriteRegister(BK4819_REG_31, val | (1u < 3));
// set the compressor ratio
//
// REG_29 <15:14> 10 Compress (AF Tx) Ratio
// 00 = Disable
// 01 = 1.333:1
// 10 = 2:1
// 11 = 4:1
//
const uint16_t compress_ratio = 2; // 2:1
val = BK4819_ReadRegister(BK4819_REG_29);
BK4819_WriteRegister(BK4819_REG_29, (val & ~(3u < 14)) | (compress_ratio < 14));
// set the expander ratio
//
// REG_28 <15:14> 01 Expander (AF Rx) Ratio
// 00 = Disable
// 01 = 1:2
// 10 = 1:3
// 11 = 1:4
//
const uint16_t expand_ratio = 1; // 2:1
val = BK4819_ReadRegister(BK4819_REG_28);
BK4819_WriteRegister(BK4819_REG_28, (val & ~(3u < 14)) | (expand_ratio < 14));
}
void BK4819_DisableVox(void)
{
const uint16_t Value = BK4819_ReadRegister(BK4819_REG_31);
BK4819_WriteRegister(BK4819_REG_31, Value & 0xFFFB);
}
void BK4819_DisableDTMF(void)
{
BK4819_WriteRegister(BK4819_REG_24, 0);
}
void BK4819_EnableDTMF(void)
{
BK4819_WriteRegister(BK4819_REG_21, 0x06D8);
BK4819_WriteRegister(BK4819_REG_24,
(1U << BK4819_REG_24_SHIFT_UNKNOWN_15)
| (24 << BK4819_REG_24_SHIFT_THRESHOLD)
| (1U << BK4819_REG_24_SHIFT_UNKNOWN_6)
| BK4819_REG_24_ENABLE
| BK4819_REG_24_SELECT_DTMF
| (14U << BK4819_REG_24_SHIFT_MAX_SYMBOLS));
}
void BK4819_PlayTone(uint16_t Frequency, bool bTuningGainSwitch)
{
uint16_t ToneConfig;
BK4819_EnterTxMute();
BK4819_SetAF(BK4819_AF_BEEP);
if (bTuningGainSwitch == 0)
ToneConfig = BK4819_REG_70_ENABLE_TONE1 | (96U << BK4819_REG_70_SHIFT_TONE1_TUNING_GAIN);
else
ToneConfig = BK4819_REG_70_ENABLE_TONE1 | (28U << BK4819_REG_70_SHIFT_TONE1_TUNING_GAIN);
BK4819_WriteRegister(BK4819_REG_70, ToneConfig);
BK4819_WriteRegister(BK4819_REG_30, 0);
BK4819_WriteRegister(BK4819_REG_30, BK4819_REG_30_ENABLE_AF_DAC | BK4819_REG_30_ENABLE_DISC_MODE | BK4819_REG_30_ENABLE_TX_DSP);
BK4819_WriteRegister(BK4819_REG_71, scale_freq(Frequency));
}
void BK4819_EnterTxMute(void)
{
BK4819_WriteRegister(BK4819_REG_50, 0xBB20);
}
void BK4819_ExitTxMute(void)
{
BK4819_WriteRegister(BK4819_REG_50, 0x3B20);
}
void BK4819_Sleep(void)
{
BK4819_WriteRegister(BK4819_REG_30, 0);
BK4819_WriteRegister(BK4819_REG_37, 0x1D00);
}
void BK4819_TurnsOffTones_TurnsOnRX(void)
{
BK4819_WriteRegister(BK4819_REG_70, 0);
BK4819_SetAF(BK4819_AF_MUTE);
BK4819_ExitTxMute();
BK4819_WriteRegister(BK4819_REG_30, 0);
BK4819_WriteRegister(BK4819_REG_30,
0
| BK4819_REG_30_ENABLE_VCO_CALIB
| BK4819_REG_30_ENABLE_RX_LINK
| BK4819_REG_30_ENABLE_AF_DAC
| BK4819_REG_30_ENABLE_DISC_MODE
| BK4819_REG_30_ENABLE_PLL_VCO
| BK4819_REG_30_ENABLE_RX_DSP);
}
#ifdef ENABLE_AIRCOPY
void BK4819_SetupAircopy(void)
{
BK4819_WriteRegister(BK4819_REG_70, 0x00E0); // Enable Tone2, tuning gain 48
BK4819_WriteRegister(BK4819_REG_72, 0x3065); // Tone2 baudrate 1200
BK4819_WriteRegister(BK4819_REG_58, 0x00C1); // FSK Enable, FSK 1.2K RX Bandwidth, Preamble 0xAA or 0x55, RX Gain 0, RX Mode
// (FSK1.2K, FSK2.4K Rx and NOAA SAME Rx), TX Mode FSK 1.2K and FSK 2.4K Tx
BK4819_WriteRegister(BK4819_REG_5C, 0x5665); // Enable CRC among other things we don't know yet
BK4819_WriteRegister(BK4819_REG_5D, 0x4700); // FSK Data Length 72 Bytes (0xabcd + 2 byte length + 64 byte payload + 2 byte CRC + 0xdcba)
}
#endif
void BK4819_ResetFSK(void)
{
BK4819_WriteRegister(BK4819_REG_3F, 0x0000); // Disable interrupts
BK4819_WriteRegister(BK4819_REG_59, 0x0068); // Sync length 4 bytes, 7 byte preamble
SYSTEM_DelayMs(30);
BK4819_Idle();
}
void BK4819_Idle(void)
{
BK4819_WriteRegister(BK4819_REG_30, 0x0000);
}
void BK4819_ExitBypass(void)
{
BK4819_SetAF(BK4819_AF_MUTE);
BK4819_WriteRegister(BK4819_REG_7E, 0x302E);
}
void BK4819_PrepareTransmit(void)
{
BK4819_ExitBypass();
BK4819_ExitTxMute();
BK4819_TxOn_Beep();
}
void BK4819_TxOn_Beep(void)
{
BK4819_WriteRegister(BK4819_REG_37, 0x1D0F);
BK4819_WriteRegister(BK4819_REG_52, 0x028F);
BK4819_WriteRegister(BK4819_REG_30, 0x0000);
BK4819_WriteRegister(BK4819_REG_30, 0xC1FE);
}
void BK4819_ExitSubAu(void)
{
// REG_51 <15> 0 1 = Enable TxCTCSS/CDCSS 0 = Disable
// REG_51 <14> 0 1 = GPIO0Input for CDCSS 0 = Normal Mode.(for BK4819v3)
// REG_51 <13> 0 1 = Transmit negative CDCSS code 0 = Transmit positive CDCSScode
// REG_51 <12> 0 CTCSS/CDCSS mode selection 1 = CTCSS 0 = CDCSS
// REG_51 <11> 0 CDCSS 24/23bit selection 1 = 24bit 0 = 23bit
// REG_51 <10> 0 1050HzDetectionMode 1 = 1050/4 Detect Enable, CTC1 should be set to 1050/4 Hz
// REG_51 <9> 0 Auto CDCSS Bw Mode 1 = Disable 0 = Enable.
// REG_51 <8> 0 Auto CTCSS Bw Mode 0 = Enable 1 = Disable
// REG_51 <6:0> 0 CTCSS/CDCSS Tx Gain1 Tuning 0 = min 127 = max
//
BK4819_WriteRegister(BK4819_REG_51, 0x0000);
}
void BK4819_Conditional_RX_TurnOn_and_GPIO6_Enable(void)
{
if (gRxIdleMode)
{
BK4819_ToggleGpioOut(BK4819_GPIO6_PIN2, true);
BK4819_RX_TurnOn();
}
}
void BK4819_EnterDTMF_TX(bool bLocalLoopback)
{
BK4819_EnableDTMF();
BK4819_EnterTxMute();
BK4819_SetAF(bLocalLoopback ? BK4819_AF_BEEP : BK4819_AF_MUTE);
BK4819_WriteRegister(BK4819_REG_70,
0
| BK4819_REG_70_MASK_ENABLE_TONE1
| (83u << BK4819_REG_70_SHIFT_TONE1_TUNING_GAIN)
| BK4819_REG_70_MASK_ENABLE_TONE2
| (83u << BK4819_REG_70_SHIFT_TONE2_TUNING_GAIN));
BK4819_EnableTXLink();
}
void BK4819_ExitDTMF_TX(bool bKeep)
{
BK4819_EnterTxMute();
BK4819_SetAF(BK4819_AF_MUTE);
BK4819_WriteRegister(BK4819_REG_70, 0x0000);
BK4819_DisableDTMF();
BK4819_WriteRegister(BK4819_REG_30, 0xC1FE);
if (!bKeep)
BK4819_ExitTxMute();
}
void BK4819_EnableTXLink(void)
{
BK4819_WriteRegister(BK4819_REG_30,
0
| BK4819_REG_30_ENABLE_VCO_CALIB
| BK4819_REG_30_ENABLE_UNKNOWN
| BK4819_REG_30_DISABLE_RX_LINK
| BK4819_REG_30_ENABLE_AF_DAC
| BK4819_REG_30_ENABLE_DISC_MODE
| BK4819_REG_30_ENABLE_PLL_VCO
| BK4819_REG_30_ENABLE_PA_GAIN
| BK4819_REG_30_DISABLE_MIC_ADC
| BK4819_REG_30_ENABLE_TX_DSP
| BK4819_REG_30_DISABLE_RX_DSP);
}
void BK4819_PlayDTMF(char Code)
{
uint16_t tone1 = 0;
uint16_t tone2 = 0;
switch (Code)
{
case '0': tone1 = 9715; tone2 = 13793; break; // 941Hz 1336Hz
case '1': tone1 = 7196; tone2 = 12482; break; // 679Hz 1209Hz
case '2': tone1 = 7196; tone2 = 13793; break; // 697Hz 1336Hz
case '3': tone1 = 7196; tone2 = 15249; break; // 679Hz 1477Hz
case '4': tone1 = 7950; tone2 = 12482; break; // 770Hz 1209Hz
case '5': tone1 = 7950; tone2 = 13793; break; // 770Hz 1336Hz
case '6': tone1 = 7950; tone2 = 15249; break; // 770Hz 1477Hz
case '7': tone1 = 8796; tone2 = 12482; break; // 852Hz 1209Hz
case '8': tone1 = 8796; tone2 = 13793; break; // 852Hz 1336Hz
case '9': tone1 = 8796; tone2 = 15249; break; // 852Hz 1477Hz
case 'A': tone1 = 7196; tone2 = 16860; break; // 679Hz 1633Hz
case 'B': tone1 = 7950; tone2 = 16860; break; // 770Hz 1633Hz
case 'C': tone1 = 8796; tone2 = 16860; break; // 852Hz 1633Hz
case 'D': tone1 = 9715; tone2 = 16860; break; // 941Hz 1633Hz
case '*': tone1 = 9715; tone2 = 12482; break; // 941Hz 1209Hz
case '#': tone1 = 9715; tone2 = 15249; break; // 941Hz 1477Hz
}
if (tone1 > 0 && tone2 > 0)
{
BK4819_WriteRegister(BK4819_REG_71, tone1);
BK4819_WriteRegister(BK4819_REG_72, tone2);
}
}
void BK4819_PlayDTMFString(const char *pString, bool bDelayFirst, uint16_t FirstCodePersistTime, uint16_t HashCodePersistTime, uint16_t CodePersistTime, uint16_t CodeInternalTime)
{
unsigned int i;
for (i = 0; pString[i]; i++)
{
uint16_t Delay;
BK4819_PlayDTMF(pString[i]);
BK4819_ExitTxMute();
if (bDelayFirst && i == 0)
Delay = FirstCodePersistTime;
else
if (pString[i] == '*' || pString[i] == '#')
Delay = HashCodePersistTime;
else
Delay = CodePersistTime;
SYSTEM_DelayMs(Delay);
BK4819_EnterTxMute();
SYSTEM_DelayMs(CodeInternalTime);
}
}
void BK4819_TransmitTone(bool bLocalLoopback, uint32_t Frequency)
{
BK4819_EnterTxMute();
BK4819_WriteRegister(BK4819_REG_70, 0 | BK4819_REG_70_MASK_ENABLE_TONE1 | (96U << BK4819_REG_70_SHIFT_TONE1_TUNING_GAIN));
BK4819_WriteRegister(BK4819_REG_71, scale_freq(Frequency));
BK4819_SetAF(bLocalLoopback ? BK4819_AF_BEEP : BK4819_AF_MUTE);
BK4819_EnableTXLink();
SYSTEM_DelayMs(50);
BK4819_ExitTxMute();
}
void BK4819_GenTail(uint8_t Tail)
{
// REG_52 <15> 0 Enable 120/180/240 degree shift CTCSS or 134.4Hz Tail when CDCSS mode
// 0 = Normal
// 1 = Enable
// REG_52 <14:13> 0 CTCSS tail mode selection (only valid when REG_52 <15> = 1)
// 00 = for 134.4Hz CTCSS Tail when CDCSS mode
// 01 = CTCSS0 120° phase shift
// 10 = CTCSS0 180° phase shift
// 11 = CTCSS0 240° phase shift
// REG_52 <12> 0 CTCSSDetectionThreshold Mode
// 1 = ~0.1%
// 0 = 0.1 Hz
// REG_52 <11:6> 0x0A CTCSS found detect threshold
// REG_52 <5:0> 0x0F CTCSS lost detect threshold
// REG_07 <15:0>
//
// When <13> = 0 for CTC1
// <12:0> = CTC1 frequency control word =
// freq(Hz) * 20.64888 for XTAL 13M/26M or
// freq(Hz) * 20.97152 for XTAL 12.8M/19.2M/25.6M/38.4M
//
// When <13> = 1 for CTC2 (Tail 55Hz Rx detection)
// <12:0> = CTC2 (should below 100Hz) frequency control word =
// 25391 / freq(Hz) for XTAL 13M/26M or
// 25000 / freq(Hz) for XTAL 12.8M/19.2M/25.6M/38.4M
//
// When <13> = 2 for CDCSS 134.4Hz
// <12:0> = CDCSS baud rate frequency (134.4Hz) control word =
// freq(Hz) * 20.64888 for XTAL 13M/26M or
// freq(Hz)*20.97152 for XTAL 12.8M/19.2M/25.6M/38.4M
switch (Tail)
{
case 0: // 134.4Hz CTCSS Tail
BK4819_WriteRegister(BK4819_REG_52, 0x828F); // 1 00 0 001010 001111
break;
case 1: // 120° phase shift
BK4819_WriteRegister(BK4819_REG_52, 0xA28F); // 1 01 0 001010 001111
break;
case 2: // 180° phase shift
BK4819_WriteRegister(BK4819_REG_52, 0xC28F); // 1 10 0 001010 001111
break;
case 3: // 240° phase shift
BK4819_WriteRegister(BK4819_REG_52, 0xE28F); // 1 11 0 001010 001111
break;
case 4: // 55Hz tone freq
BK4819_WriteRegister(BK4819_REG_07, 0x046f); // 0 00 0 010001 101111
break;
}
}
void BK4819_EnableCDCSS(void)
{
BK4819_GenTail(0); // CTC134
BK4819_WriteRegister(BK4819_REG_51, 0x804A);
}
void BK4819_EnableCTCSS(void)
{
#ifdef ENABLE_CTCSS_TAIL_PHASE_SHIFT
//BK4819_GenTail(1); // 120° phase shift
BK4819_GenTail(2); // 180° phase shift
//BK4819_GenTail(3); // 240° phase shift
#else
BK4819_GenTail(4); // 55Hz tone freq
#endif
// REG_51 <15> 0
// 1 = Enable TxCTCSS/CDCSS
// 0 = Disable
// REG_51 <14> 0
// 1 = GPIO0Input for CDCSS
// 0 = Normal Mode (for BK4819 v3)
// REG_51 <13> 0
// 1 = Transmit negative CDCSS code
// 0 = Transmit positive CDCSS code
// REG_51 <12> 0 CTCSS/CDCSS mode selection
// 1 = CTCSS
// 0 = CDCSS
// REG_51 <11> 0 CDCSS 24/23bit selection
// 1 = 24bit
// 0 = 23bit
// REG_51 <10> 0 1050HzDetectionMode
// 1 = 1050/4 Detect Enable, CTC1 should be set to 1050/4 Hz
// REG_51 <9> 0 Auto CDCSS Bw Mode
// 1 = Disable
// 0 = Enable
// REG_51 <8> 0 Auto CTCSS Bw Mode
// 0 = Enable
// 1 = Disable
// REG_51 <6:0> 0 CTCSS/CDCSS Tx Gain1 Tuning
// 0 = min
// 127 = max
BK4819_WriteRegister(BK4819_REG_51, 0x904A); // 1 0 0 1 0 0 0 0 0 1001010
}
uint16_t BK4819_GetRSSI(void)
{
return BK4819_ReadRegister(BK4819_REG_67) & 0x01FF;
}
bool BK4819_GetFrequencyScanResult(uint32_t *pFrequency)
{
const uint16_t High = BK4819_ReadRegister(BK4819_REG_0D);
const bool Finished = (High & 0x8000) == 0;
if (Finished)
{
const uint16_t Low = BK4819_ReadRegister(BK4819_REG_0E);
*pFrequency = (uint32_t)((High & 0x7FF) << 16) | Low;
}
return Finished;
}
BK4819_CssScanResult_t BK4819_GetCxCSSScanResult(uint32_t *pCdcssFreq, uint16_t *pCtcssFreq)
{
uint16_t Low;
uint16_t High = BK4819_ReadRegister(BK4819_REG_69);
if ((High & 0x8000) == 0)
{
Low = BK4819_ReadRegister(BK4819_REG_6A);
*pCdcssFreq = ((High & 0xFFF) << 12) | (Low & 0xFFF);
return BK4819_CSS_RESULT_CDCSS;
}
Low = BK4819_ReadRegister(BK4819_REG_68);
if ((Low & 0x8000) == 0)
{
*pCtcssFreq = ((Low & 0x1FFF) * 4843) / 10000;
return BK4819_CSS_RESULT_CTCSS;
}
return BK4819_CSS_RESULT_NOT_FOUND;
}
void BK4819_DisableFrequencyScan(void)
{
BK4819_WriteRegister(BK4819_REG_32, 0x0244);
}
void BK4819_EnableFrequencyScan(void)
{
BK4819_WriteRegister(BK4819_REG_32, 0x0245);
}
void BK4819_SetScanFrequency(uint32_t Frequency)
{
BK4819_SetFrequency(Frequency);
// REG_51 <15> 0 1 = Enable TxCTCSS/CDCSS 0 = Disable
// REG_51 <14> 0 1 = GPIO0 Input for CDCSS 0 = Normal Mode.(for BK4819v3)
// REG_51 <13> 0 1 = Transmit negative CDCSS code 0 = Transmit positive CDCSScode
// REG_51 <12> 0 CTCSS/CDCSS mode selection 1 = CTCSS 0 = CDCSS
// REG_51 <11> 0 CDCSS 24/23bit selection 1 = 24bit 0 = 23bit
// REG_51 <10> 0 1050HzDetectionMode 1 = 1050/4 Detect Enable, CTC1 should be set to 1050/4 Hz
// REG_51 <9> 0 Auto CDCSS Bw Mode 1 = Disable 0 = Enable.
// REG_51 <8> 0 Auto CTCSS Bw Mode 0 = Enable 1 = Disable
// REG_51 <6:0> 0 CTCSS/CDCSS Tx Gain1 Tuning 0 = min 127 = max
BK4819_WriteRegister(BK4819_REG_51, 0
| BK4819_REG_51_DISABLE_CxCSS
| BK4819_REG_51_GPIO6_PIN2_NORMAL
| BK4819_REG_51_TX_CDCSS_POSITIVE
| BK4819_REG_51_MODE_CDCSS
| BK4819_REG_51_CDCSS_23_BIT
| BK4819_REG_51_1050HZ_NO_DETECTION
| BK4819_REG_51_AUTO_CDCSS_BW_DISABLE
| BK4819_REG_51_AUTO_CTCSS_BW_DISABLE);
BK4819_RX_TurnOn();
}
void BK4819_Disable(void)
{
BK4819_WriteRegister(BK4819_REG_30, 0);
}
void BK4819_StopScan(void)
{
BK4819_DisableFrequencyScan();
BK4819_Disable();
}
uint8_t BK4819_GetDTMF_5TONE_Code(void)
{
return (BK4819_ReadRegister(BK4819_REG_0B) >> 8) & 0x0F;
}
uint8_t BK4819_GetCDCSSCodeType(void)
{
return (BK4819_ReadRegister(BK4819_REG_0C) >> 14) & 3u;
}
uint8_t BK4819_GetCTCShift(void)
{
return (BK4819_ReadRegister(BK4819_REG_0C) >> 12) & 3u;
}
uint8_t BK4819_GetCTCType(void)
{
return (BK4819_ReadRegister(BK4819_REG_0C) >> 10) & 3u;
}
void BK4819_SendFSKData(uint16_t *pData)
{
unsigned int i;
uint8_t Timeout = 200;
SYSTEM_DelayMs(20);
BK4819_WriteRegister(BK4819_REG_3F, BK4819_REG_3F_FSK_TX_FINISHED);
BK4819_WriteRegister(BK4819_REG_59, 0x8068);
BK4819_WriteRegister(BK4819_REG_59, 0x0068);
for (i = 0; i < 36; i++)
BK4819_WriteRegister(BK4819_REG_5F, pData[i]);
SYSTEM_DelayMs(20);
BK4819_WriteRegister(BK4819_REG_59, 0x2868);
while (Timeout-- && (BK4819_ReadRegister(BK4819_REG_0C) & 1u) == 0)
SYSTEM_DelayMs(5);
BK4819_WriteRegister(BK4819_REG_02, 0);
SYSTEM_DelayMs(20);
BK4819_ResetFSK();
}
void BK4819_PrepareFSKReceive(void)
{
BK4819_ResetFSK();
BK4819_WriteRegister(BK4819_REG_02, 0);
BK4819_WriteRegister(BK4819_REG_3F, 0);
BK4819_RX_TurnOn();
BK4819_WriteRegister(BK4819_REG_3F, 0 | BK4819_REG_3F_FSK_RX_FINISHED | BK4819_REG_3F_FSK_FIFO_ALMOST_FULL);
// Clear RX FIFO
// FSK Preamble Length 7 bytes
// FSK SyncLength Selection
BK4819_WriteRegister(BK4819_REG_59, 0x4068);
// Enable FSK Scramble
// Enable FSK RX
// FSK Preamble Length 7 bytes
// FSK SyncLength Selection
BK4819_WriteRegister(BK4819_REG_59, 0x3068);
}
void BK4819_PlayRoger(void)
{
#if 0
const uint32_t tone1_Hz = 500;
const uint32_t tone2_Hz = 700;
#else
// motorola type
const uint32_t tone1_Hz = 1540;
const uint32_t tone2_Hz = 1310;
#endif
BK4819_EnterTxMute();
BK4819_SetAF(BK4819_AF_MUTE);
BK4819_WriteRegister(BK4819_REG_70, 0xE000); // 1110 0000 0000 0000
BK4819_EnableTXLink();
SYSTEM_DelayMs(50);
BK4819_WriteRegister(BK4819_REG_71, scale_freq(tone1_Hz));
BK4819_ExitTxMute();
SYSTEM_DelayMs(80);
BK4819_EnterTxMute();
BK4819_WriteRegister(BK4819_REG_71, scale_freq(tone2_Hz));
BK4819_ExitTxMute();
SYSTEM_DelayMs(80);
BK4819_EnterTxMute();
BK4819_WriteRegister(BK4819_REG_70, 0x0000);
BK4819_WriteRegister(BK4819_REG_30, 0xC1FE); // 1 1 0000 0 1 1111 1 1 1 0
}
void BK4819_PlayRogerMDC(void)
{
unsigned int i;
BK4819_SetAF(BK4819_AF_MUTE);
BK4819_WriteRegister(BK4819_REG_58, 0x37C3); // FSK Enable, RX Bandwidth FFSK1200/1800, 0xAA or 0x55 Preamble, 11 RX Gain,
// 101 RX Mode, FFSK1200/1800 TX
BK4819_WriteRegister(BK4819_REG_72, 0x3065); // Set Tone2 to 1200Hz
BK4819_WriteRegister(BK4819_REG_70, 0x00E0); // Enable Tone2 and Set Tone2 Gain
BK4819_WriteRegister(BK4819_REG_5D, 0x0D00); // Set FSK data length to 13 bytes
BK4819_WriteRegister(BK4819_REG_59, 0x8068); // 4 byte sync length, 6 byte preamble, clear TX FIFO
BK4819_WriteRegister(BK4819_REG_59, 0x0068); // Same, but clear TX FIFO is now unset (clearing done)
BK4819_WriteRegister(BK4819_REG_5A, 0x5555); // First two sync bytes
BK4819_WriteRegister(BK4819_REG_5B, 0x55AA); // End of sync bytes. Total 4 bytes: 555555aa
BK4819_WriteRegister(BK4819_REG_5C, 0xAA30); // Disable CRC
// Send the data from the roger table
for (i = 0; i < 7; i++)
BK4819_WriteRegister(BK4819_REG_5F, FSK_RogerTable[i]);
SYSTEM_DelayMs(20);
// 4 sync bytes, 6 byte preamble, Enable FSK TX
BK4819_WriteRegister(BK4819_REG_59, 0x0868);
SYSTEM_DelayMs(180);
// Stop FSK TX, reset Tone2, disable FSK
BK4819_WriteRegister(BK4819_REG_59, 0x0068);
BK4819_WriteRegister(BK4819_REG_70, 0x0000);
BK4819_WriteRegister(BK4819_REG_58, 0x0000);
}
void BK4819_Enable_AfDac_DiscMode_TxDsp(void)
{
BK4819_WriteRegister(BK4819_REG_30, 0x0000);
BK4819_WriteRegister(BK4819_REG_30, 0x0302);
}
void BK4819_GetVoxAmp(uint16_t *pResult)
{
*pResult = BK4819_ReadRegister(BK4819_REG_64) & 0x7FFF;
}
void BK4819_SetScrambleFrequencyControlWord(uint32_t Frequency)
{
BK4819_WriteRegister(BK4819_REG_71, scale_freq(Frequency));
}
void BK4819_PlayDTMFEx(bool bLocalLoopback, char Code)
{
BK4819_EnableDTMF();
BK4819_EnterTxMute();
BK4819_SetAF(bLocalLoopback ? BK4819_AF_BEEP : BK4819_AF_MUTE);
BK4819_WriteRegister(BK4819_REG_70, 0xD3D3);
BK4819_EnableTXLink();
SYSTEM_DelayMs(50);
BK4819_PlayDTMF(Code);
BK4819_ExitTxMute();
}
View Git Blame Copy Permalink