doc: Remove usage (now replaced by autogenerated manpage)

2013-04-07 14:59:07 +02:00
1 parent 2b80f8e620
commit 3d914ce22b
@@ -1,88 +0,0 @@
-0xFFFF v0.6  // The Free Fiasco Firmware Flasher
-
-Operations:
- -b [cmdline]    boot default or loaded kernel (default: no cmdline)
- -b update       boot default or loaded kernel to Update mode
- -r              reboot device
- -l              load kernel and initfs images to RAM
- -f              flash all specified images
- -c              cold flash 2nd and secondary image
- -x [/dev/mtd]   check for bad blocks on mtd device (default: all)
- -E file         dump all device images to one fiasco image, see -t
- -e [dir]        dump all device images to directory, see -t (default: current)
-
-Device configuration:
- -I              identify, show all information about device
- -D 0|1|2        change root device: 0 - flash, 1 - mmc, 2 - usb
- -U 0|1          disable/enable USB host mode
- -R 0|1          disable/enable R&D mode
- -F flags        change R&D flags, flags are comma separated list, can be empty
- -H rev          change HW revision
- -N ver          change NOLO version string
- -K ver          change kernel version string
- -T ver          change initfs version string
- -S ver          change SW release version string
- -C ver          change content eMMC version string
-
-Input image specification:
- -M file         specify fiasco image
- -m arg          specify normal image
-                 arg is [[[dev:[hw:]]ver:]type:]file[%lay]
-                   dev is device name string (default: emtpy)
-                   hw are comma separated list of HW revisions (default: empty)
-                   ver is image version string (default: empty)
-                   type is image type (default: autodetect)
-                   file is image file name
-                   lay is layout file name (default: none)
-
-Image filters:
- -t types        filter images by type
- -d dev          filter images by device
- -w hw           filter images by HW revision
-
-Fiasco image:
- -u [dir]        unpack fiasco image to directory (default: current)
- -g file[%sw]    generate fiasco image with SW rel version (default: no version)
-
-Other options:
- -i              identify images
- -s              simulate, do not flash or write on disk
- -n              disable hash, checksum and image type checking
- -v              be verbose and noisy
- -h              show this help message
-
-R&D flags:
-  no-omap-wd          disable auto reboot by OMAP watchdog
-  no-ext-wd           disable auto reboot by external watchdog
-  no-lifeguard-reset  disable auto reboot by software lifeguard
-  serial-console      enable serial console
-  no-usb-timeout      disable usb timeout for flashing
-  sti-console         enable sti console
-  no-charging         disable battery charging
-  force-power-key     force omap boot reason to power key
-
-Supported devices:
-  SU-18          Nokia 770
-  RX-34          Nokia N800
-  RX-44          Nokia N810
-  RX-48          Nokia N810 Wimax
-  RX-51          Nokia N900
-
-Supported image types:
-  xloader
-  2nd
-  secondary
-  kernel
-  initfs
-  rootfs
-  mmc
-  cmt-2nd
-  cmt-algo
-  cmt-mcusw
-
-Supported connection protocols:
-  Local on device
-  NOLO via USB
-  Cold flashing via USB
-  Mk II protocol via USB
-  RAW disk via USB