Remove old devices.c code

src/Makefile

@@ -1,6 +1,6 @@
 include ../config.mk
 OBJ=main.o hexdump.o dump.o flash.o serial.o qmode.o
-OBJ+=fpid.o query.o pieces.o utils.o devices.o console.o
+OBJ+=fpid.o query.o pieces.o utils.o console.o
 OBJ+=squeue/squeue.o
 BIN=0xFFFF
 #LIBS=`${HAVE_USB} && echo -- '-lusb'`

src/devices.c

@@ -1,127 +0,0 @@
-/*
- *  0xFFFF - Open Free Fiasco Firmware Flasher
- *  Copyright (C) 2007-2009  pancake <pancake@nopcode.org>
- *  Copyright (C) 2012       Pali Rohár <pali.rohar@gmail.com>
- *
- *  This program is free software: you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation, either version 3 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#if HAVE_USB
-#include "main.h"
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-/*
- * The internet tablet PC (and probably most of
- * Nokia devices have different USB-IDs depending
- * on the boot state.
- *
- * The following table shows this info:
- *
- *        omap-rom     nolo    flash-mode  mass-stor  pc-suite
- * 770               0421:0105             0421:0431
- * n800              0421:04c3             0421:0431
- * n810              0421:0105
- * n900   0421:0106  0421:0105  0421:01c8  0421:01c7  0421:01c8
- * n950              0421:0105  0421:01c8
- *
- *      mode          images       protocol
- * omap-rom      2nd, secondary    OMAP messages + Nokia X-Loader protocol
- * nolo          all except mmc    NOLO
- * flash-mode    all except rootfs Mk II
- * mass-storage  sd, first emmc    Standard USB Mass Storage
- * pc-suite      all except rootfs Mk II
- *
- */
-struct devices supported_devices[SUPPORTED_DEVICES] = {
-  { "FFFF",                0x0000, 0x0000, FLASH_NORMAL },  // dummy
-  { "unkn",                0x0421, 0x3f00, FLASH_NORMAL },  // probably a development board
-  { "n800",                0x0421, 0x04c3, FLASH_NORMAL },  // n800
-  { "770/n810/n900/n950",  0x0421, 0x0105, FLASH_NORMAL },  // 770, n810, n900, n950
-  { "n900",                0x0421, 0x0106, FLASH_COLD   },  // n900 cold flashing
-  { "n900/n950",           0x0421, 0x01c8, FLASH_MKII   },  // n900 mmc flashing, n950 full flashing
-  { "770/n800",            0x0421, 0x0431, FLASH_DISK   },  // 770, n800 usb mass storage
-  { "n900",                0x0421, 0x01c7, FLASH_DISK   },  // n900 usb mass storage
-  { NULL },
-  { NULL }
-};
-
-/** Returns 0 when no device was found and a positive
-  * non-zero value when one was found.
-  *
-  * The return value is the index into the supported_devices
-  * array which denotes the device which was found.
-  */
-int is_valid_device(struct usb_device_descriptor *udd)
-{
-	int i;
-	struct devices ptr = supported_devices[1];
-
-	for(i=1 ; ptr.vendor_id; ptr = supported_devices[++i])
-		if ((udd->idVendor  == ptr.vendor_id)
-		&&  (udd->idProduct == ptr.product_id)) {
-                        D printf("found %s\n", supported_devices[i].name);
-			return i;
-		}
-
-	return 0;
-}
-
-/*
- * List all supported device-ids and it's names
- *
- */
-void list_valid_devices()
-{
-	int i;
-	struct devices ptr = supported_devices[1];
-
-	for(i=1; ptr.name; ptr = supported_devices[++i])
-		printf("%04x:%04x  %s\n", ptr.vendor_id, ptr.product_id, ptr.name);
-}
-
-/*
- * Returns true (1) when a valid usb device is found and stores the udd and devices
- *   structures for the specified device.
- * Otherwise returns false (0)
- */
-int usb_device_found(struct usb_device_descriptor *udd, struct devices *it_device)
-{
-	int dev_index = 0;
-	struct usb_bus *bus;
-	if ((usb_find_busses()<0) || (usb_find_devices()==-1)) {
-		fprintf(stderr, "\nerror: no usb bus or device found.\n");
-		exit(1);
-	} else {
-		for (bus = usb_busses; bus; bus = bus->next) {
-			struct usb_device *dev = bus->devices;
-			D printf("bus: \n");
-			for (; dev; dev = dev->next) { 
-				*udd = dev->descriptor;
-				D printf(" dev (%s) - ", dev->filename);
-				D printf("vendor: %04x product: %04x\n", udd->idVendor, udd->idProduct);
-
-				if ((dev_index = is_valid_device(udd))) {
-					device = dev;
-					printf("%s found!\n", dev->filename);
-					*it_device = supported_devices[dev_index];
-					return 1;
-				}
-			}
-		}
-	}
-	return 0;
-}
-#endif

src/main.c

@@ -330,7 +330,7 @@ int connect_via_usb()
 {
 	static char pbc[]={'/','-','\\', '|'};
 	struct usb_device_descriptor udd;
-	struct devices it_device;
+//	struct devices it_device;
 	int    c = 0;
 
 	// usb_set_debug(5);
@@ -346,11 +346,11 @@ int connect_via_usb()
 	while(!dev) {
 		usleep(0xc350); // 0.5s
 
-		if(!usb_device_found(&udd, &it_device)) {
+/*		if(!usb_device_found(&udd, &it_device)) {
 			printf("\rWaiting for device... %c", pbc[++c%4]);
 			fflush(stdout);
 			continue;
-		}
+		}*/
 
 		/* open device */
 		if(!(dev = usb_open(device))) {
@@ -397,8 +397,8 @@ usb_detach_kernel_driver_np(dev, 2);
 		break;
 	}
 
-	printf("found %s (%04x:%04x)\n", it_device.name,
-		it_device.vendor_id, it_device.product_id);
+//	printf("found %s (%04x:%04x)\n", it_device.name,
+//		it_device.vendor_id, it_device.product_id);
 
 	/* go go go! */
 	while(get_status());
@@ -439,12 +439,12 @@ int main(int argc, char **argv)
 //		case 'F':
 //			fiasco_image = optarg;
 //			break;
-		case 'd':
-			sscanf(optarg, "%04hx:%04hx", 
-					&supported_devices[SUPPORTED_DEVICES-2].vendor_id,
-					&supported_devices[SUPPORTED_DEVICES-2].product_id);
-			supported_devices[SUPPORTED_DEVICES-2].name = strdup("user");
-			break;
+//		case 'd':
+//			sscanf(optarg, "%04hx:%04hx", 
+//					&supported_devices[SUPPORTED_DEVICES-2].vendor_id,
+//					&supported_devices[SUPPORTED_DEVICES-2].product_id);
+//			supported_devices[SUPPORTED_DEVICES-2].name = strdup("user");
+//			break;
 		case 'D':
 			root_device = atoi(optarg);
 			break;
@@ -463,9 +463,9 @@ int main(int argc, char **argv)
 		case 'r':
 			rd_mode = atoi(optarg);
 			break;
-		case 'l':
-			list_valid_devices();
-			return 0;
+//		case 'l':
+//			list_valid_devices();
+//			return 0;
 		case 'p':
 			add_piece(optarg);
 			break;

src/main.h

@@ -10,7 +10,7 @@ extern char strbuf[1024];
 #define _GNU_SOURCE
 
 // Forward declaration for use in function arguments.
-struct devices;
+//struct devices;
 
 int queue_mode();
 int reverse_extract_pieces(char *dir);
@@ -36,8 +36,8 @@ int fiasco_flash(const char *file);
 extern struct usb_device *device;
 extern struct usb_dev_handle *dev;
 int is_valid_device(struct usb_device_descriptor *udd);
-void list_valid_devices();
-int usb_device_found(struct usb_device_descriptor *udd, struct devices *it_device);
+//void list_valid_devices();
+//int usb_device_found(struct usb_device_descriptor *udd, struct devices *it_device);
 int console(const char *device);
 int connect_via_usb();
 #endif
@@ -70,15 +70,15 @@ enum flash_mode {
 	FLASH_DISK,
 };
 
-struct devices {
+/*struct devices {
   char *name;
   unsigned short vendor_id;
   unsigned short product_id;
   enum flash_mode mode;
-};
+};*/
 
-#define SUPPORTED_DEVICES 10
-extern struct devices supported_devices[SUPPORTED_DEVICES];
+//#define SUPPORTED_DEVICES 10
+//extern struct devices supported_devices[SUPPORTED_DEVICES];
 
 extern int pcs_n;
 extern struct piece_t pcs[10];