* Update documentation for the 0.2 release

* Fix case0 bug of libusb in usb_device_found function

README

@@ -1,6 +1,5 @@
 
 
-
     ------.    ,---------.--.--.
    /       |  ___        |  |  |  \\------------ -- .  
    | .__  / \/   .   ____/ _/ _/      The 0pen
@@ -11,19 +10,23 @@
                _/ ___|_.|__|
                 '`
 
-The 'Free Fiasco Firmware Flasher' aka 0xFFFF utility tries to implement
+The 'Free Fiasco Firmware Flasher' aka 0xFFFF utility implements a free
-a free (GPL'd) userspace handler for the NOLO bootloader.
+(under the GPLv3 license) userspace handler for the NOLO bootloader and
+extended features for flashing, dumping and getting information for the
+Nokia Internet Tablets.
 
 Use it with CARE. This is an experimental tool and it can brick your device.
 It's not suposed to be stable, so nokia will probably release incompatible
 bootloaders to break this tool. USE IT AT YOUR OWN RISK.
 
-This tool has been designed and tested on n770. The n800 flash should work
-but it's not tested and is known to use different request codes.
-
 PLEASE. Read carefully all the documentation inside doc/* for more information
 before building or using the flasher to avoid questions, problems or so.
 
+Feel free to join to the mailing list and visit the homepage for more info:
+
+  0xffff@lists.nopcode.org
+  http://www.nopcode.org/0xFFFF
+
 
 Have phun!
 

doc/oops

@@ -1,2 +0,0 @@
-Consequences of a weird flashing :)<br />
-<img src="img/n770bars.jpg">

doc/usage

@@ -8,25 +8,36 @@ Tablets (n770 and n800).
   - reboot de mother board
   - extract the current firmware pieces from the device (dump)
   - set the USB host/slave mode
-  - set the R&R mode
+  - fine grained R&D flags support
   - identify firmware pieces
+  - dump mtd partitions (embedded mtd-utils source code)
+  - reconstruct initfs from a dump
+  - dump config partition
+  - automatic piece identifier
+  - console mode (shell like)
   </pre>
 This is the help message of the tool:
 <pre>
 <b>~$ 0xFFFF -h</b>
-0xFFFF v0.1  - The Open Free Fiasco Firmware Flasher
+0xFFFF v0.2  // The Free Fiasco Firmware Flasher
  -b [arg]       boots the kernel with arguments
- -e [path]     dump the firmware pieces into the path
+ -e [path]      dump and extract pieces to path
- -p [[p:]file] piece-of-firmware : file-where-this-piece-is
  -r [0|1]       disable/enable R&D mode
+ -f <flags>     set the given RD flags (see '-f help')
+ -p [[p%]file]  piece-of-firmware % file-where-this-piece-is
  -u [fiasco]    unpack target fiasco image
  -U [0|1]       disable/enable the usb host mode
+ -s [serial]    serial port console (minicom like terminal)
+ -C [/dev/mtd]  check bad blocks on mtd
+ -c             console prompt mode
  -h             show this help message
  -i             show device information (let standby mode)
  -I [piece]     identify a firmware piece
  -l             list supported usb device ids
  -d [vid:pid]   injects a usb device into the supported list
+ -D [0|1|2]     sets the root device to flash (0), mmc (1) or usb (2)
  -R             reboot the omap board
+ -x             extract configuration entries from /dev/mtd1
  -v             be verbose and noisy
  -V             show 0xFFFF version information
 Pieces are: xloader secondary kernel initfs rootfs omap-nand 

src/devices.c

@@ -23,6 +23,18 @@
 #include <string.h>
 #include <stdlib.h>
 
+/*
+ * The internet tablet PC (and probably most of
+ * Nokia devices have different USB-IDs depending
+ * on the boot state.
+ *
+ * The following table shows this info:
+ *
+ *           boot       os
+ * n770   0421:0105  0421:0431
+ * n800              0421:0431
+ *
+ */
 struct devices supported_devices[SUPPORTED_DEVICES] = {
   { "FFFF", 0x000, 0x0000, 0x0000 },  // dummy
   { "unkn", 0x421, 0x3f00, 0x0000 },  // probably a development board
@@ -53,6 +65,10 @@ int is_valid_device(struct usb_device_descriptor *udd)
 	return 0;
 }
 
+/*
+ * List all supported device-ids and it's names
+ *
+ */
 void list_valid_devices()
 {
 	int i;
@@ -62,6 +78,12 @@ void list_valid_devices()
 		printf("%04x:%04x  %s\n", ptr.vendor_id, ptr.product_id, ptr.name);
 }
 
+/*
+ * Returns true (1) when a valid usb device is found and stores the udd and devices
+ *   structures for the specified device.
+ * Otherwise returns false (0)
+ */
+
 int usb_device_found(struct usb_device_descriptor *udd, struct devices *it_device)
 {
 	struct usb_bus *bus;
@@ -75,9 +97,6 @@ int usb_device_found(struct usb_device_descriptor *udd, struct devices *it_devic
 		case -1:
 			fprintf(stderr, "\nerror: no devices found.\n");
 			exit(1);
-		case 0:
-			fprintf(stderr, "\noops: no permission to usb. got root?\n");
-			exit(1);
 		default:
 			for (bus = usb_busses; bus; bus = bus->next) {
 				struct usb_device *dev = bus->devices;