* Finally implement the support for the FIASCO firmware format

* Up version to 0.3
* Alphabetically order the help message flags
* Cleaner short help message
* Pseudo-api for creating firmwares (not yet finished)
* Add '-F' flag to flash from a fiasco image

doc/usage

@@ -8,6 +8,7 @@ Tablets (n770 and n800).
   - reboot de mother board
   - extract the current firmware pieces from the device (dump)
   - set the USB host/slave mode
+  - pack/unpack fiasco firmwares
   - fine grained R&D flags support
   - identify firmware pieces
   - dump mtd partitions (embedded mtd-utils source code)
@@ -19,27 +20,29 @@ Tablets (n770 and n800).
 This is the help message of the tool:
 <pre>
 <b>~$ 0xFFFF -h</b>
-0xFFFF v0.2  // The Free Fiasco Firmware Flasher
+0xFFFF v0.3  // The Free Fiasco Firmware Flasher
  -b [arg]       boots the kernel with arguments
- -e [path]      dump and extract pieces to path
- -r [0|1]       disable/enable R&D mode
- -f <flags>     set the given RD flags (see '-f help')
- -p [[p%]file]  piece-of-firmware % file-where-this-piece-is
- -u [fiasco]    unpack target fiasco image
- -U [0|1]       disable/enable the usb host mode
- -s [serial]    serial port console (minicom like terminal)
- -C [/dev/mtd]  check bad blocks on mtd
  -c             console prompt mode
- -h             show this help message
- -i             show device information (let standby mode)
- -I [piece]     identify a firmware piece
- -l             list supported usb device ids
+ -C [/dev/mtd]  check bad blocks on mtd
  -d [vid:pid]   injects a usb device into the supported list
  -D [0|1|2]     sets the root device to flash (0), mmc (1) or usb (2)
+ -e [path]      dump and extract pieces to path
+ -f <flags>     set the given RD flags (see '-f help')
+ -F [fiasco]    flash a fiasco firmware image
+ -h             show this help message
+ -H [file]      calculate hash for file
+ -i             show device information (let standby mode)
+ -I [piece]     identify a firmware piece
+ -l, -L         list supported usb device ids
+ -p [[p%]file]  piece-of-firmware % file-where-this-piece-is
+ -r [0|1]       disable/enable R&D mode
  -R             reboot the omap board
- -x             extract configuration entries from /dev/mtd1
+ -s [serial]    serial port console (minicom like terminal)
+ -u [fiasco]    unpack target fiasco image
+ -U [0|1]       disable/enable the usb host mode
  -v             be verbose and noisy
  -V             show 0xFFFF version information
+ -x             extract configuration entries from /dev/mtd1
 Pieces are: xloader secondary kernel initfs rootfs omap-nand 
 </pre>