kp3s/kp3s-marlin
1
Fork 0
mirror of https://github.com/mechano/Kingroon_KP3S_Marlin_Firmware.git synced 2025-12-03 03:46:24 +04:00
Code Releases 1 Activity

Add files via upload

Browse Source
This commit is contained in:
Roberto Giuffre`
2023-11-23 01:06:21 +01:00
committed by GitHub
parent 9476ad0e48
commit 58a7749473
2 changed files with 15 additions and 15 deletions
Download Patch File Download Diff File Expand all files Collapse all files

24
Configuration.h
View File

@@ -63,7 +63,7 @@
// @section info
// Author info of this build printed to the host during boot and M115
#define STRING_CONFIG_H_AUTHOR "(kubik369)" // Who made the changes.
#define STRING_CONFIG_H_AUTHOR "Mechano" // Who made the changes.
//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
// @section machine
@@ -94,7 +94,7 @@
*
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/
#define BAUDRATE 250000
#define BAUDRATE 115200
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
@@ -691,9 +691,9 @@
#define DEFAULT_Ki_LIST { 1.08, 1.08 }
#define DEFAULT_Kd_LIST { 114.00, 114.00 }
#else
#define DEFAULT_Kp 12.93 // GR rilevati con Pronterface sulla mia stampante
#define DEFAULT_Ki 0.78 // GR rilevati con Pronterface sulla mia stampante
#define DEFAULT_Kd 53.51 // GR rilevati con Pronterface sulla mia stampante
#define DEFAULT_Kp 13.50 // GR rilevati con Pronterface sulla mia stampante
#define DEFAULT_Ki 0.98 // GR rilevati con Pronterface sulla mia stampante
#define DEFAULT_Kd 46.5 // GR rilevati con Pronterface sulla mia stampante
#endif
#else
#define BANG_MAX 255 // Limit hotend current while in bang-bang mode; 255=full current
@@ -781,9 +781,9 @@
// 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
// from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 100.43
#define DEFAULT_bedKi 15.47
#define DEFAULT_bedKd 434.75
#define DEFAULT_bedKp 114.0
#define DEFAULT_bedKi 21.93
#define DEFAULT_bedKd 395.4
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#else
@@ -1817,12 +1817,12 @@
// @section geometry
// The size of the printable area
#define X_BED_SIZE 172
#define Y_BED_SIZE 172
#define X_BED_SIZE 180
#define Y_BED_SIZE 180
// Travel limits (linear=mm, rotational=°) after homing, corresponding to endstop positions.
#define X_MIN_POS -10
#define Y_MIN_POS -7
#define X_MIN_POS -3
#define Y_MIN_POS 0
#define Z_MIN_POS 0
#define X_MAX_POS X_BED_SIZE
#define Y_MAX_POS Y_BED_SIZE

6
Configuration_adv.h
View File

@@ -1086,7 +1086,7 @@
#if ENABLED(ASSISTED_TRAMMING)
// Define from 3 to 9 points to probe.
#define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } }
#define TRAMMING_POINT_XY { { 20, 20 }, { 160, 20 }, { 160, 160 }, { 20, 160 } }
// Define position names for probe points.
#define TRAMMING_POINT_NAME_1 "Front-Left"
@@ -1704,7 +1704,7 @@
*/
#define POWER_LOSS_RECOVERY // GR recupera dopo interruzione corrente
#if ENABLED(POWER_LOSS_RECOVERY)
#define PLR_ENABLED_DEFAULT true // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) // GR attivo di default
#define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) // GR attivo di default
//#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss
//#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
@@ -1716,7 +1716,7 @@
// Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
// especially with "vase mode" printing. Set too high and vases cannot be continued.
#define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#define POWER_LOSS_MIN_Z_CHANGE 0.1 // (mm) Minimum Z change before saving power-loss data // GR era 0.05 lo metto a 0.1 per quel bug che fa girare l'estrusore al ritorno dall'interruzione.
// Enable if Z homing is needed for proper recovery. 99.9% of the time this should be disabled!
//#define POWER_LOSS_RECOVER_ZHOME