* Expansion: Wake thread on UART error flag
* Expansion: Stop UART async rx early
* FuriHalSerial: Fix RXFNE interrupt hang
---------
Co-authored-by: hedger <hedger@users.noreply.github.com>
* FeliCa: Handle non-hardware Polling commands
NFC TagInfo and possibly other readers rely on Polling commands with Request Code of 1 (default System Code request) or non-FFFF System Code to detect card type. Since the NFC controller doesn't seem to handle them in hardware and simply bubbles them up, and then the Flipper firmware will just ignore them and refuse to respond afterwards, this causes the reading operation to fail.
This commit adds a simple handler for such Polling commands so that readers behaving like NFC TagInfo could read the emulated card without failing.
* Only handle cases when System Code is not FFFF
The NFC controller should handle Polling commands with the System Code set to FFFF, so it's not necessary for the firmware to handle it.
* Remove system code logging
* More cleanups
* Remove the claim that we need a poller change
We already have enough information to determine whether or not the card supports NDEF since SYS_OP register value is included in all current Lite-S card dumps.
* Respond to 12FC polling command when needed
* Handle Polling with NDEF and Lite-S Service Code
This allows the reader to specifically select the service by naming the Service Code.
* Introduce API for manual handling of Polling commands
Introduce nfc_felica_listener_timer_anticol_start() and nfc_felica_listener_timer_anticol_stop(). These are for now just wrappers around the block_tx timer that can be used to delay the response until the desired Time Slot. Thanks to the loose timing constraints of FeliCa collision resolution protocol, no compensation seems to be necessary. Also enabled the block_tx timer for FeliCa listener, but with both compensation and fdt set to 0 to keep the original behavior of not using the timer during normal data exchange.
This API is now being used for handling Polling commands that are not handled by the NFC controller on the hardware side.
* Document target_time_slot
* Implement changes suggested by @RebornedBrain
* api: f18 version sync
* nfc: added stubs for `nfc_felica_listener_timer_anticol` for unit tests
---------
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: hedger <hedger@nanode.su>
* feat: pinning settings in favorites
* include archive in unit tests fw
* change settings icon
* update text with suggestions from the ui team
* Small touch of constness
---------
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: hedger <hedger@nanode.su>
* Support longer advertised BLE UUID
* BLE: support manufacturer data
* Don't pair when GapPairingNone
* Add PR feedback
---------
Co-authored-by: hedger <hedger@users.noreply.github.com>
* libs: stricter constness for saving RAM with .rodata section; fbt: sdk: fixed signature generation for nested const params
* hal: additional fixes for constness in USB subsystem
* debug apps: additional usb-related fixes
* mjs: more consts for token parser
* fatfs: const driver struct
* hal: more consts for ble & nfc vars
* hal: made FuriHalSpiBusHandle static
* hal: made FuriHalI2cBusHandle static
* usb: restored previous api
* linter fixes
* API fixes
* Fill option for widget frame
* Add widget circle element
* Add widget line element
* Fix missing include for InputType
* Fix missing comment
* Update api symbols
* Load .fxbm from file
* Fix copy pasta
* Add fill param to example
* Fix some comments
* Bump JS SDK 0.3
* Fix free
* Rename widget frame to rect
* Gui: add widget_add_frame_element backward compatibility macros
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* furi: update heap4 to latest
* debug: heap under/overflow testing app
* fix formatting
* silence pvs warnings
* Linker: symbols without type
* Infrared: fix crash in universal remotes on long back press
* Infrared: properly fix incorrect input handling behavior and crash in universal remote. Fix same issue in hid_app.
* FreeRTOSConfig: explicit cast to uint in configTOTAL_HEAP_SIZE
* Format sources
* C and C++ compatible version of stm32wb55_linker.h
Co-authored-by: あく <alleteam@gmail.com>
* Move OTG controls to the power service
* Accessor: add missing power service import
* Power: add is_otg_enabled to info and properly handle OTG enable with VBUS voltage present
* Power: method naming
* Power: add backward compatibility with old-style use of furi_hal_power
* Scripts: lower MIN_GAP_PAGES to 1
* SubGhz: fix incorrect logging tag
* SubGhz: delegate OTG management to power service
* Power: fix condition race, various improvements
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* feat: universal ir signal selection
* fix: f18, format specifiers
* update labels with suggestions from the ui team
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Furi, USB, BLE: extra stack space for some threads, small code cleanup.
* Furi: thread watermark check on exit, explicitly crash if built with LIB_DEBUG=1
* Debug: color logging in apps/furi gdb helper, check and show crash message in gdb console.
* WIP: fix lost BadBLE keystrokes
* Switch to semaphores for synchronization
* Move checking to the gap level
* Remove leftovers from hid_service
* Remove more leftovers from hid_service
* De-allocate the semaphore after use
* Change the timeout to account for unforeseen situation
* Update F18 API
* Fix naming and unbump api version
* Move away from semaphores
* Remove the left over include
* Ble: cleanup error handling in ble_gatt_characteristic_update
* Fix PVS warning
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Core: event_flag, removing duplicate code
* event_loop: add support furi_event_flags
* Examples: add missing free in event loop examples
* Furi: fix event flag
* Sync api symbols
* Unit_test: evet_loop_event_flags
* Fix multiple waiting list elements handling
* Unit_test: add event_loop_event_flag test
* FURI: event_loop add restrictions
* Fix multiple waiting lists items for good
* Improve FuriEventLoop unit tests
* Abolish callback return value
* Remove return value from callback signature
* Use bool level value instead of int32_t
* Add unit tests for FuriStreamBuffer
* Add unit tests for FuriSemaphore
* Speed up test execution
* Improve docs
* Add a stub for furi os-level primitives
* Add more checks for edge cases
* Allow event loop notification from ISR
* Bump api version
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: Georgii Surkov <georgii.surkov@outlook.com>
Co-authored-by: Georgii Surkov <37121527+gsurkov@users.noreply.github.com>
* Initial structure for nonce collection
* Nonce logging
* Dictionary attack structure
* Fix compilation
* Identified method to reduce candidate states
* Use EXT_PATH instead of ANY_PATH
* Use median calibrated distance, collect parity bits
* Modify parity collection
* Fixed parity bit collection
* Add note to fix nonce logging
* Fix nonce logging
* Clean redundant code
* Fix valid_nonce
* First attempt disambiguous nonce implementation
* FM11RF08S backdoor detection
* Initial accelerated dictionary attack for weak PRNGs
* Refactor to nested dictionary attack
* Renaming some variables
* Hard PRNG support for accelerated dictionary attack
* Update found keys, initial attempt
* Update found keys, second attempt
* Code cleanup
* Misc bugfixes
* Only use dicts in search_dicts_for_nonce_key if we have them
* Collect nonces again
* Should be detecting both backdoors now
* Relocate backdoor detection
* Hardnested support
* Fix regression for regular nested attack
* Backdoor read
* Backdoor working up to calibration
* Backdoor nested calibration
* Don't recalibrate hard PRNG tags
* Static encrypted nonce collection
* Update TODO
* NFC app UI updates, MVP
* Bump f18 API version (all functions are NFC related)
* Add new backdoor key, fix UI status update carrying over from previous read
* Clear TODO line
* Fix v1/v2 backdoor nonce collection
* Speed up backdoor detection, alert on new backdoor
* Add additional condition to backdoor check
* I'll try freeing memory, that's a good trick!
* Do not enter nested attack if card is already finished
* Do not reset the poller between collected nonces
* Clean up various issues
* Fix Hardnested sector/key type logging
* Add nested_target_key 64 to TODO
* Implement progress bar for upgraded attacks in NFC app
* Typo
* Zero nested_target_key and msb_count on exit
* Note TODO (malloc)
* Dismiss duplicate nonces
* Fix calibration (ensure values are within 3 standard deviations)
* Log static
* No nested dictionary attack re-entry
* Note minor inefficiency
* Uniformly use crypto1_ prefix for symbols in Crypto1 API
* Fix include paths
* Fix include paths cont
* Support CUID dictionary
* Fix log levels
* Avoid storage errors, clean up temporary files
* Handle invalid key candidates
* Fix memory leak in static encrypted attack
* Fix memory leak, use COUNT_OF macro
* Use single call to free FuriString
* Refactor enums to avoid redefinition
* Fix multiple crashes and state machine logic
* Fix inconsistent assignment of known key and known key type/sector
* Backdoor known key logic still needs the current key
* Larger data type for 4K support
* Fix typo
* Fix issue with resume logic
* Mark TODOs for next PR
* Remove redundant assignment
* Fix size_t format specifier
* Simplify auth_passed condition
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
* reduced reserved memory size for system stack; added temporary markup to monitor usage
* fbt: relink elf file on linker script change; removed debug memory fill
* Make PVS Happy
* Make doxygen happy
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Now 4a listener invokes upper level callback on Halt and FieldOff
* Added new method for drawing mirrored XBM bitmaps
* iso14443_4a poller logic enhanced
* Function renamed accroding to review suggestions
* Rename #2
* Api adjustements
* Correct API bump
Co-authored-by: あく <alleteam@gmail.com>
- BT Service: cleanup code
- Dialog: correct release order in file browser
- Rpc: rollback to pre #3881 state
- Kernel: fix inverted behavior in furi_kernel_is_running
- Log: properly take mutex when kernel is not running
- Thread: rework tread control block scrubbing procedure, ensure that we don't do stupid things in idle task, add new priority for init task
- Timer: add control queue flush method, force flush on stop
- Furi: system init task now performs thread scrubbing
- BleGlue: add some extra checks
- FreeRTOSConfig: fix bunch of issues that were preventing configuration from being properly applied and cleanup
State callbacks assumed they were invoked from the thread that changed
its state, but this wasn't true for FuriThreadStateStarting in the past,
and now it's not true for FuriThreadStateStopped either.
Now it is safe to release the thread memory form the state callback
once it switches to FuriThreadStateStopped. Therefore, pending deletion
calls can be removed.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* FuriHal, drivers: rework gauge initialization, ensure that we can recover from any kind of internal/external issue
* Make PVS happy
* Format sources
* bq27220: add gaps injection into write operations
* Drivers: bq27220 cleanup and various fixes
* Drivers: bq27220 verbose logging and full access routine fix
* Drivers: better cfg mode exit handling in bq27220 driver
* Drivers: rewrite bq27220 based on bqstudio+ev2400, experiments and guessing. Fixes all known issues.
* PVS: hello license check
* Drivers: minimize reset count in bq27220 init sequence
* Drivers: bq27220 hide debug logging, reorganize routine to ensure predictable result and minimum amount of interaction with gauge, add documentation and notes.
* Drivers: more reliable bq27220_full_access routine
* Drivers: replace some warning with error in bq27220
* Drivers: move static asserts to headers in bq27220
* Fix PVS warnings
* Drivers: simplify logic in bq27220
---------
Co-authored-by: hedger <hedger@users.noreply.github.com>
* FuriThread: Make FuriThreadPriorityIdle equal to the FreeRTOS one, remove FuriThreadPriorityNone
This magic constant was meaningless,
FuriThreadPriorityNormal is now assigned by default instead.
* Make furi_thread_list_process private
Its 'runtime' parameter is to be obtained from FreeRTOS,
which means apps cannot do it.
* DirectDraw: Remove an useless include and fix memory leak
Makes this debug app compileable with uFBT out of the box
Co-authored-by: あく <alleteam@gmail.com>
* System code added to felica hal config functions
* Felica sensf_res setup logic adjusted with new struct
* Set api symbols version to 73.0
* Felica unit tests fix
* Furi: prevent use after free on xEventGroupSetBits call
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
strlcpy doesn't zero the buffer and ensures null termination,
just like snprintf
strlcat is already used by mjs and it's a safe alternative to strcat,
so it should be OK to expose to apps
