Remove old serial.c code

src/Makefile

@@ -1,5 +1,5 @@
 include ../config.mk
-OBJ=main.o hexdump.o dump.o nolo.o serial.o qmode.o
+OBJ=main.o hexdump.o dump.o nolo.o qmode.o
 OBJ+=utils.o console.o
 OBJ+=squeue/squeue.o
 OBJ+=image.o fiasco.o device.o usb-device.o cold-flash.o

src/main.c

@@ -200,7 +200,7 @@ void show_usage()
 	printf(" -Q              enter shared queues server mode (for gui or remote)\n");
 #endif
 	printf ("Local stuff:\n"
-		" -s [serial]     serial port console (minicom like terminal)\n"
+//		" -s [serial]     serial port console (minicom like terminal)\n"
 		" -h              show this help message\n"
 		" -S [subversion] unpacks/flash pieces matching this sub-version information\n"
 		" -n              do not flash or write to disk (simulation)\n"
@@ -480,8 +480,8 @@ int main(int argc, char **argv)
 		case 'e':
 			reverseto = optarg;
 			break;
-		case 's':
-			return console(optarg);
+//		case 's':
+//			return console(optarg);
 //		case 'u':
 //			fiasco_image = optarg;
 //			unpack = 1;

src/main.h

@@ -44,7 +44,7 @@ extern struct usb_dev_handle *dev;
 int is_valid_device(struct usb_device_descriptor *udd);
 //void list_valid_devices();
 //int usb_device_found(struct usb_device_descriptor *udd, struct devices *it_device);
-int console(const char *device);
+//int console(const char *device);
 int connect_via_usb();
 #endif
 

src/serial.c

@@ -1,86 +0,0 @@
-/*
- *  0xFFFF - Open Free Fiasco Firmware Flasher
- *  Copyright (C) 2007  pancake <pancake@youterm.com>
- *
- *  This program is free software: you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation, either version 3 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "main.h"
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <getopt.h>
-#include <termios.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <signal.h>
-#include <fcntl.h>
-#include <getopt.h>
-
-int open_serial(const char *file)
-{
-	struct termios tc;
-	int fd = open (file, O_RDWR | O_SYNC);
-	if (fd < 0) {
-		perror (file);
-		return -1;
-	}
-	// 115200 baud, 8n1, no flow control
-	tcgetattr(fd, &tc);
-	tc.c_iflag = IGNPAR;
-	tc.c_oflag = 0;
-	tc.c_cflag = CS8 | CREAD | CLOCAL;
-	tc.c_lflag = 0;
-	cfsetispeed(&tc, B115200);
-	cfsetospeed(&tc, B115200);
-	tcsetattr(fd, TCSANOW, &tc);
-	return fd;
-}
-
-int console(const char *device)
-{
-	char str[513];
-	int fd = open_serial(device);
-	int pid;
-
-	if (fd == -1) {
-		fprintf(stderr, "Cannot open serial device %s\n", device);
-		return 1;
-	}
-
-	pid = fork();
-	if (pid) {
-		while(1) {
-			fgets(str, 512, stdin);
-			if (write(fd, str, strlen(str)-1) == -1) {
-				perror("write");
-				exit (1);
-			}
-		}
-	} else {
-		char buf;
-		while(1) {
-			if (read(fd, &buf,1) == -1) {
-				perror("read");
-				exit (1);
-			}
-			write(1, &buf, 1);
-		}
-	}
-
-	close(fd);
-
-	return 0;
-}