Pali Rohár
6ec64f4992
operations: Fix NULL pointer dereference in dev_boot_device
...
This will fix a crash when calling "0xFFFF -b" from Mk II Update mode.
2016-12-10 14:13:41 +01:00
Pali Rohár
8f57f7ef61
mkii: Fix detection of Update mode
2016-12-10 14:13:14 +01:00
Pali Rohár
3d71caab8f
usb-device: Do not reattach kernel driver after closing cold flash mode
2016-12-07 11:56:37 +01:00
Pali Rohár
4ccf8fb369
usb-device: Do not print verbose message "Reattach kernel driver to USB interface..."
2016-12-07 11:55:54 +01:00
Pali Rohár
188fa70c80
cold-flash: Increase timeout after leaving cold flash mode
...
Switching to NOLO takes about one second and NOLO itself wait another second. So it should be OK.
2016-12-07 11:55:26 +01:00
Pali Rohár
f2a51b5041
disk: Do not fail when empty block device is exported
2016-12-07 11:38:07 +01:00
Pali Rohár
19e2b22193
image: Remove dead code in image_align()
2016-12-07 00:39:36 +01:00
Pali Rohár
15dbd14d7a
doc: Update fiasco documentation
2016-12-06 23:42:41 +01:00
Pali Rohár
0650cdf51f
cold-flash: Show OMAP chip revision
2016-12-06 23:13:48 +01:00
Pali Rohár
9ea8f2bb38
cal: Style fix
2016-12-06 23:13:12 +01:00
Pali Rohár
9a5f940046
usb-device: Check that we are not using broken libusb-1.0 library
2016-12-06 23:11:47 +01:00
Pali Rohár
5e79d651ca
all: Compile globally without _GNU_SOURCE, define _BSD_SOURCE or _GNU_SOURCE where needed
2016-12-06 23:10:58 +01:00
Pali Rohár
676da47751
all: Revert libusb-1.0 support
...
Listing of usb devices with libusb-1.0 is too slow and not usable for
flashing or cold-flashing Nokia N900.
Old libusb (0.1) does not have this problem and works perfectly.
Problem for libusb-1.0 was reported at least two times into libusb-devel
mailing list, but upstream developers are totally ignore it. One message is
in archive: https://sourceforge.net/p/libusb/mailman/message/34985373/
Because of that there is just one option: use tested and working libusb 0.1
library instead some experimental and non-working libusb-1.0.
2016-12-06 22:39:44 +01:00
Pali Rohár
ea7f2a441a
all: Add support for Nokia N950 (RM-680)
2016-06-27 17:24:51 +02:00
Pali Rohár
61d77eed68
mkii: Call /version/sw_release only for protocol version 2
...
Looks like command /version/sw_release is supported only by protocol version 2.
2016-06-27 17:24:05 +02:00
Pali Rohár
8a433f2d7a
usb-device: Do not reattach kernel driver if USB interface is not used
2016-05-12 00:18:02 +02:00
Pali Rohár
cf95375177
disk: Fix detection of MyDocs partition in DISK RAW mode for non RX-51 devices
2016-05-12 00:12:55 +02:00
Pali Rohár
d2e7b3d242
mkii: Implement rebooting to Update mode
2016-03-12 12:47:41 +01:00
Pali Rohár
54805eb040
mkii: Define MKII_UPDATE_MODE instead hardcoded constant
2016-03-12 12:01:27 +01:00
Pali Rohár
7b3e9bcf00
mkii: Use libusb_get_active_config_descriptor() instead libusb_get_config_descriptor()
...
This will fix problem that it was used incorrect config index
2016-03-12 11:38:00 +01:00
Pali Rohár
96e4fa5995
mkii: Fix memory leak, call libusb_free_config_descriptor()
2016-03-12 11:36:50 +01:00
Pali Rohár
c560f3642c
usb-device: Finish usb device detection based on product strings
2016-03-09 00:15:59 +01:00
Pali Rohár
98451c5851
usb-device: Add FLASH_DISK usb ids for all supported devices
2016-03-09 00:15:25 +01:00
Pali Rohár
a1623bcb7e
image: Fix detection of jffs2 initfs images
...
Looks like that some official initfs images are bigger then 3MB, so set limit to 10MB
2016-03-09 00:07:52 +01:00
Pali Rohár
c90c6319fe
main: Initialize buf before calling dev_get_rd_flags()
2016-02-23 18:38:48 +01:00
Pali Rohár
aeb9e897db
usb-device: Autodetect Nokia 770 device from product string
2016-02-23 18:23:04 +01:00
Pali Rohár
6952d73082
libusb-sniff: Fix libusb_control_transfer function
2016-02-23 18:15:55 +01:00
Pali Rohár
bc7894b99d
all: Fix usb endpoints after conversion to libusb 1.0
...
Endpoint in nolo.c for libusb_bulk_transfer must be 0x02, not 0x01.
2016-02-21 20:52:21 +01:00
Pali Rohár
abcf256268
disk: Use correct libusb function which returns Linux devnum value
...
It is libusb_get_device_address() and not libusb_get_port_number()
2016-02-12 22:27:35 +01:00
Pali Rohár
09920cf8ab
config.mk: Version is from git
2016-01-23 16:46:05 +01:00
Pali Rohár
96de6a6215
usb-device: Fix memory leak when listing devices
2016-01-23 16:38:17 +01:00
Pali Rohár
2504f9e553
travis: Update travis script for clang and libusb-1.0
2016-01-23 16:27:35 +01:00
Pali Rohár
2e9748e6a5
cold-flash: Comment unused omap variables
2016-01-23 16:26:40 +01:00
Pali Rohár
fc987674dd
all: Code style fixes
2016-01-23 16:07:02 +01:00
Pali Rohár
62fa041f86
all: Rename variable readed to sent
2016-01-23 16:06:51 +01:00
Sebastian Reichel
ed4bdab6e7
libusb-sniff: add libusb 1.0 support
...
This adds additional support for libusb-1.0 to the
sniffing library. Afterwards it can be used with
libusb 1.0 and libusb 0.1 based binaries.
2016-01-23 16:16:18 +01:00
Sebastian Reichel
d5028a12ca
all: Switch to libusb-1.0
...
libusb 0.1 is deprecated. This updates 0xFFFF to use the
newer libusb 1.0 API instead.
2016-01-23 16:06:12 +01:00
Pali Rohár
6482e4d2b7
libusb-sniff: Use POSIX.1-2003 workaround for dlsym() assignment which is compatible with C99
2016-01-23 16:03:01 +01:00
Sebastian Reichel
57b0c6d0c4
libusb-sniff: avoid usb.h include
...
usb.h is only required for the definition of usb_dev_handle,
which is never used, so it can be defined as anonymous struct
instead. This has the advantage, that libusb is not required
on the system compiling the library.
2016-01-23 16:02:46 +01:00
Sebastian Reichel
4a4005b46d
libusb-sniff: add header for getenv()
2016-01-23 16:02:40 +01:00
Pali Rohár
5f0897d372
doc: Remove nanddump param -i also from doc
2016-01-13 22:28:36 +01:00
Sebastian Reichel
d4342a8cdf
disk: dirent.h is required for DIR
...
Without <dirent.h> include newer gcc releases
throw warnings about undefined "DIR".
2016-01-13 22:23:29 +01:00
Sebastian Reichel
055621d3a2
all: free() is defined in stdlib.h
...
Without including <stdlib.h> newer gcc releases throw
warnings about undefined free().
2016-01-13 22:23:29 +01:00
Pali Rohár
f36a762168
fiasco: Fix code for append device & hwrevs subsection
...
Fix possible use-after-free in WRITE_OR_FAIL_FREE() macro
2016-01-10 17:26:23 +01:00
Pali Rohár
c258289b74
image: Check for return value fo image_read() in image_type_from_data()
2016-01-10 14:33:30 +01:00
Pali Rohár
3c1ab9934d
main: Check for SW rel version length
2016-01-10 14:32:43 +01:00
Pali Rohár
b48b9b558c
fiasco: Remove wrong checks for 'name' and 'swver'
...
Members 'name' and 'swver' of fiasco are arrays, not pointers
2016-01-10 14:31:28 +01:00
Pali Rohár
b7f80de25d
all: Check for return value of lseek
2016-01-10 14:29:18 +01:00
Pali Rohár
1ee86c05f4
fiasco: Fix memory leak for device_hwrevs_bufs variable
2016-01-10 13:29:28 +01:00
Pali Rohár
79af7395bf
fiasco: In simulate mode do not close invalid not open fd
2016-01-10 13:27:17 +01:00
Pali Rohár